Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 21.6 MPa | 3130 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ HC 2190G Polyvinyl Chloride, Flexible (PVC, Flexible) Geon HC 2190G is a 90 Shore A non-phthalate, gamma-stable flexible vinyl compound made from FDA sanctioned ingredients. HC 2190G can be used for extrusion and injection molding healthcare applicatio.. |
|||
Tensile Strength at Break | 21.6 MPa @Thickness 2.00 mm |
3130 psi @Thickness 0.0787 in |
50mm/min; ASTM D638 |
LG Chemical KEYFLEX BT 1030D Ester Type TPE Description: Injection Molding, TPC-ET, General Purpose, Low ModulusApplication: Automotive Interior, Soft Touch GripsCAS: 37282-12-5Information provided by LG Chemical |
|||
Tensile Strength at Break | 21.6 MPa | 3130 psi | |
LG Chemical LGflex EBNW Plasticizer Features: Excellent Adhesion, Transparency, and Non-endocrine disrupterApplication: PVC Food Package WrapInformation provided by LG Chemical |
|||
Tensile Strength at Break | 21.6 MPa | 3130 psi | ASTM D638 |
Lotte Chemical Titan TITANZEX® HI2000 High density polyethylene HI2000 is a high density polyethylene for injection molding. HI2000 meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 3.1a & 3.2a. A.. |
|||
Tensile Strength at Break | 21.6 MPa | 3130 psi | ASTM D638 |
Solvay Specialty Polymers Polidan® EC/110 Polyethylene, Crosslinked (XLPE) Polidan® XLPE-PEX -Cross-linkable Polyethylene. Low density polyethylene based compound crosslinkable by moisture; it consists of a silane pregrafted base compound (Sioplas® method) to be use.. |
|||
Tensile Strength at Break | 21.6 MPa @Temperature 200 °C, Time 252000 sec |
3130 psi @Temperature 392 °F, Time 70.0 hour |
After Dry Heat Aging; ASTM D865 |
Seals Eastern 7182B Fluorocarbon-Elastomer Formulated AFLAS® high-temperature, high-pressure "sour" oil & gas service. ED resistant. Excellent acid and base resistance.Information provided by Seals Eastern, Inc. |
|||
Tensile Strength at Break | 21.6 MPa | 3130 psi | 50 mm/min; ASTM D638 |
Supreme Petrochem SH 03 High Impact Polystyrene Characteristics High flow Good melt strength Excellent toughness Processing MoldingApplications Gas assisted injection molding of T.V. cabinets Suitable for thin walled parts, AC grills and toys .. |
|||
Tensile Strength at Break | 21.6 MPa | 3130 psi | 50 mm/min; ASTM D638 |
Supreme Petrochem SP 8001 High Gloss, ESCR High Impact Polystyrene Characteristics Very high toughness Excellent ESCR properties against common food chemicals High gloss & heat resistance Processing Extrusion & Forming Applications Fatty food containers Co-extru.. |