Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Compressive Strength | 20.0 MPa | 2900 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica Akulon® PA 66 - Akulon 66 - Dry Polyamide obtained by the polymerisation of Hexamethylenediamine and Adipic acid. It is one of the oldest engineering plastics, having been created in the USA in 1930. Due to its origin it is widely.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica Akulon® PA 66.6 Akulon GX - Dry Copolymer of nylon with excellent mechanical features, it combines the good impact resistances of PA6 as well as the higher stiffness of PA66. For this reason it machines very well on automatic tool.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica Omniamid PA6 GHR HR - Dry Cast nylon 6 produced with the addition of graphite and a special lubricator which gives to this product better properties than natural PA6G. Whilst retaining the general features of OMNIAMID G it i.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica PEI Polyetherimide This high performance engineering plastic is a non-reinforced self-extinguishing amorphous polymer with high thermal, electrical and mechanical properties which are typical of a crystalline polymer... |
|||
Compressive Strength | 20.0 MPa | 2900 psi | |
Pyrotek Insural® 140 Insulating Refractory Shapes for Aluminum Insural® 140 Precast Shapes are designed for the containment of molten aluminum in hot top modules (cross feeder) and trough/launder applications.AdvantagesNear zero expansion avoids gaps at the jo.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 10% Def.; ASTM D695 |
Quadrant EPP TIVAR® 88-2 ESD Black, Premium Lubricant Filled, Lower COF, Electro Static Dissipative Lining Material (ASTM Product Data Sheet) |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 10% Def.; ASTM D695 |
Quadrant EPP TIVAR® 88-2 UHMW-PE, Premium Lubricant Filled Lining Material (ASTM Product Data Sheet) Promotes reliable, steady bulk material flow Abrasion-, chemical- and corrosion-resistant Low coefficient of friction No moisture absorption Reduces or eliminates arching, ratholing and erractic f.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 10% Def.; ASTM D695 |
Quadrant EPP TIVAR® DrySlide UHMW-PE, Lubricant Filled, Electro Static Dissipative, UV Stabilized (ASTM Product Data Sheet) |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica Akulon® PET Arnite Omnialite Arnite is a relatively new semi-crystalline polymer developed for technical applications. It is suitable for mechanical parts which require dimensional stability and a low friction coefficient. Omni.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | |
Engineered Syntactic Systems BZ-24 Deep Water Syntactic Foam Syntactic foams are a unique combination of hollow spheres, a resin matrix, and other additives. When combined and processed properly, the constituents form a lightweight homogeneous material having.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | Elastic Limit |
Wolf Kunststoff ZEDEX® ZX-100EL63 A1G Polymer Alloy, Elastomer Modified Main Characteristics: Rubbery; Soft; High shock absorption; High impact resistance; Elongation > 300%Applications: Handling, Vessel and Pump, Steel and Water, Chemical Engineering, Automitve Technol.. |
|||
Compressive Strength | >= 20.0 MPa | >= 2900 psi | |
Beijing Evergrow Resources PTFE, 60% Bronze Filled Filled PTFE article is manufactured by molding method with filled PTFE resin. Filled PTFE resin is manufactured by compounding PTFE granular resin with filler. Broadly speaking PTFE compounds have t.. |
|||
Compressive Strength | 20.0 MPa | 2900 psi | 1% strain over 1000 hours; ISO.899 DIN.53444 |
Omnia Plastica Omniamid PA6 G G - Dry Cast nylon 6. The method of production of this polyamide (i.e. the polymerisation of the caprolactam directly in the mould) allows the production of stock shapes in larger than normal dimensions, su.. |