- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 50 g/10 min
Polymer Property : Melt Flow = 50 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 230 °C |
50 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Phillips 66 COPYLENE® CM500LN Polypropylene, Impact Copolymer, High Flow, Medium Impact, Nucleated, Lube, Injection Molding COPYLENE™ CM500LN is a very high melt flow, medium impact polypropylene copolymer resin, designed for injection molding applications requiring a good balance of properties with faster cycling capab.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 190 °C |
50 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| LyondellBasell Alathon® H4250 High Density Polyethylene, Injection Molding Grade ALATHON H4250 is a high-flow “freezer†grade resin that exhibits enhanced cold temperature impact performance, enhanced processing and thermal stability, with good color and organoleptic p.. |
|||
| Melt Flow | 50 g/10 min | 50 g/10 min | ASTM D1238 |
| LyondellBasell Microthene® MP574189 Linear Low Density Polyethylene, Injection Molding Grade ApplicationsMicrothene MP574189 exhibits excellent flow and impact with good stiffness. Typical applications include lids, closures, containers, housewares and medical items. MP574189 is 16 mesh pow.. |
|||
| Melt Flow | 50 g/10 min | 50 g/10 min | ASTM D1238 |
| LyondellBasell Petrothene® GA574189 Linear Low Density Polyethylene, Injection Molding Grade PETROTHENE GA574189 exhibits excellent flow and impact with good stiffness. Typical applications include lids, closures, containers, housewares and medical items.Regulatory Status: GA574189 meets th.. |
|||
| Melt Flow | 50 - 80 g/10 min | 50 - 80 g/10 min | Melt Volume Rate (cm³/10 min) |
| Huntsman IROGRAN® A 85 P 4394 TPU-Polyether Introduction: IROGRAN A 85 P 4394 is a high performance polyether based thermoplastic polyurethane intended for extrusion and injection molding applications. IROGRAN A 85 P 4394 is part of the HUNTS.. |
|||
| Melt Flow | 50 - 80 g/10 min | 50 - 80 g/10 min | 50-80 cm<sup>3</sup>/10 min; Melt Volume Rate |
| Huntsman IROGRAN® A 85 P 4944 Ether-Based TPU-For Cable Industry High temperature stabilityInformation provided by Huntsman |
|||
| Melt Flow | 50 - 80 g/10 min | 50 - 80 g/10 min | Melt Volume Rate (cm³/10 min) |
| Huntsman IROGRAN® A 85 P 4441 TPU-Polyether Introduction: IROGRAN A 85 P 4441 is a polyether based thermoplastic polyurethane intended for injection molding and extrusion applications. IROGRAN A 85 P 4441 is part of the HUNTSMAN technical ext.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 250 °C |
50 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| SABIC Innovative Plastics Valox® HX3061HP PBT PBT for compounding/fibers only. Not intended for injection molding. Biocompatible. Melt viscosity: 250C at 21.6 kgf is 1450-1850 poise. Available in Natural color (1001) only. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 250 °C |
50 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
| Samyang Tribit® 1500G20 PBT, Reinforced General Purpose Crystallization is fast, formability is excellent and thermal resistance, chemical resistance, electrical properties and abrasion resistance are excellent.1500G20 is a reinforced, general purpose gr.. |
|||
| Melt Flow | 50 g/10 min @Load 10.0 kg, Temperature 200 °C |
50 g/10 min @Load 22.0 lb, Temperature 392 °F |
ASTM D1238 |
| Supreme Petrochem SP 6425 9885 Abrasion Resistant Polystyrene Characteristics Low friction, impact polystyrene to provide wear resistance and static charge dissipation Excellent gloss & molded appearance and weld line miscibility Easy flowing grade with good.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 330 °C |
50 g/10 min @Load 4.76 lb, Temperature 626 °F |
ASTM D1238 |
| Samsung Cheil Industries Infino® TK-6036H PPA, Glass Filled Information provided by Samsung Cheil Industries. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 230 °C |
50 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Borealis Bormed™ BH348MO Polypropylene Heteroplastic Copolymer for Injection Molding Bormed™ BH348MO is a polypropylene copolymer characterized by high impact strength, fast flow and crystallization speed. The material is nucleated with Borstar® Nucleation Technology (BNT). This .. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 230 °C |
50 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Borealis HJ325MO Polypropylene HJ325MO is a polypropylene homopolymer intended for injection molding. Its very high melt flow makes it especially suitable for thin-wall packaging and products with long flow length. is designed fo.. |
|||
| Melt Flow | 50 g/10 min @Temperature 230 °C |
50 g/10 min @Temperature 446 °F |
I<sub>2</sub>; ASTM D1238 |
| Formosa Plastics Formolene® 6550A Thin Walled Injection Molding Polypropylene Impact CopolymerApplications: Housewares, containers and other rigid packaging.Formolene 6550A (DEVELOPMENTAL) is a medium impact, high flow, controlled rheology copolymer of polypropylene designed .. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 230 °C |
50 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Total PPC 11812 S01 Polypropylene, Heterophasic Copolymer, Injection Molding Polypropylene PPC 11812 S01 has been developed for high speed injection molding of thin walled packaging containers requiring top level impact resistance at cold temperature (-20°C). It is charact.. |
|||
| Melt Flow | 50 g/10 min @Temperature 230 °C |
50 g/10 min @Temperature 446 °F |
I<sub>2</sub>; ASTM D1238 |
| Formosa Plastics Formolene® 2550A Thin Walled Injection Molding Polypropylene Medium Impact CopolymerApplications: Housewares, containers and other rigid packaging.Formolene 2550A is a medium impact, high flow, controlled rheology copolymer of polypropylene designed for such .. |
|||
| Melt Flow | 50 g/10 min @Temperature 230 °C |
50 g/10 min @Temperature 446 °F |
ASTM D1238 |
| A. Schulman PP 3471-01 Polypropylene High Flow Homopolymer Polypropylene DescriptionPolypropylene PP 3471-01 is an ultra high flow homopolymer polypropylene designed for high speed, thin wall injection molding.Information provided by A. Schulman. |
|||
| Melt Flow | >= 50 g/10 min @Load 10.0 kg, Temperature 240 °C |
>= 50 g/10 min @Load 22.0 lb, Temperature 464 °F |
ISO 1133 |
| Cossa Polimeri ESTABLEND PA 6000 ABS / Nylon 6 Blend ESTABLEND PA is a blend of acrylonitrile butadiene styrene and polyamide 6.Easy processing, high surface quality, high chemical resistance, good heat resistanceInformation provided by Cossa Polimeri.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 190 °C |
50 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| ExxonMobil LL 6201.19 Injection Molding Resin Product Description: LL 6201 is a narrow molecular weight butane copolymer designed for applications that require excellent toughness. This resin offers easy processability for applications that req.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 190 °C |
50 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| ExxonMobil LLDPE LL 6201XR Wire & Cable Linear Low Density Polyethylene Resin (European Grade) Product Description: LL 6201 is a C4 Ziegler Natta LLDPE recommended for various compounding applications. Availability: Africa & Middle East, Asia Pacific and Europe Additive: Antiblock: No Slip: N.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 190 °C |
50 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238, ISO 1133 |
| DuPont™ Elvaloy® AC 15024S Ethylene Methyl Acrylate Elvaloy® AC 15024S is a copolymer of ethylene and methyl acrylate. It is available in pellet form for use in conventional extrusion equipment designed to process polyethylene type resins. Elvaloy®.. |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 235 °C |
50 g/10 min @Load 4.76 lb, Temperature 455 °F |
|
| Arkema Group Rilsan® AMN Y TLD Nylon 12, MoS2 Filled (Dry) Designation ISO 1874-PA12,MHLS,14-010,MD05Grade with molybdenum filler for injection molding. Available color: steel gray. Light and heat stabilized. Mold-release agent.Low friction coefficient. Goo.. |
|||
| Melt Flow | 50 g/10 min @Load 5.00 kg, Temperature 275 °C |
50 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
| Azoty Tarnow™ Tarnamid® T-29 Polyamide 6 - Natural Medium-high viscosity extrusion grade for mono or multilayer blown film, including biaxial oriented films, also for production of monofilament; can be used for injection molding and compounding.Tarn.. |
|||
| Melt Flow | 50 g/10 min @Load 10.0 kg, Temperature 220 °C |
50 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D-1238 |
| Bhansali Engineering Abstron AN-312 Flame Retardant ABS Grade |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 190 °C |
50 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM-D1238 |
| Braskem IG58 HDPE Injection Molding Polyethylene Copolymer IG58 is a high-density polyethylene, narrow molecular weight butene-1 copolymer produced by the solution process for injection molding applications. It offers high stiffness, impact strength and out.. |
|||
| Melt Flow | 50 g/10 min @Load 10.0 kg, Temperature 220 °C |
50 g/10 min @Load 22.0 lb, Temperature 428 °F |
ASTM D-1238 |
| Bhansali Engineering Abstron AN-312 Flame Retardant ABS Grade |
|||
| Melt Flow | 50 g/10 min @Load 5.00 kg, Temperature 235 °C |
50 g/10 min @Load 11.0 lb, Temperature 455 °F |
3 min.; ASTM D1238 |
| ALM PA 620-MF Mineral Fiber Filled Nylon 12 SLS Prototyping Polymer Information provided by Advanced Laser Materials (ALM). |
|||
| Melt Flow | 50 g/10 min @Load 2.16 kg, Temperature 190 °C |
50 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| Bapolene® 3295 Polyethylene, Injection Grade Designed to offer improved cycle times and dimensional stability This product complies with US FDA 21CFR177.1250.Applications: Food containers and closures.Bapolene® and Bapolan® are registered t.. |
|||
Copyright © lookpolymers.com All Rights Reserved