Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | <= 13 µm | <= 13 µm | 90% smaller than |
Nyco M1250 AS WOLLASTOCOAT® Wollastonite Chemically treated grade.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal per.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% smaller than |
Nyco NYAD® M1250 Wollastonite Fine particle size grade.Wollastonite is a naturally occurring white mineral with an acicular (needle-shaped) particle structure. This distinctive particle morphology makes wollastonite an ideal per.. |
|||
Particle Size | 13 µm | 13 µm | 50% of particles, (DSD Powder) |
Ferro IX 2443 Passivation Glasses - High Voltage (Zn-B-Silicates) Typical Powder Form: RWG, DSD Zinc-Boro-Silicate passivation glasses are used for hermetic passivation of high voltage diodes, thyristors, and transistors. They provide high junction temperatures a.. |
|||
Particle Size | 13 µm | 13 µm | 50% of particles |
Ferro IX 2683 Passivation Glasses - High Voltage (Zn-B-Silicates) Typical Powder Form: DSD Zinc-Boro-Silicate passivation glasses are used for hermetic passivation of high voltage diodes, thyristors, and transistors. They provide high junction temperatures and ca.. |
|||
Particle Size | 13 µm | 13 µm | Mean |
Momentive Performance Materials PolarTherm® PT100 Boron Nitride (BN) Powder Single crystal platelet BN Powder. High aspect ratio platelets may improve thermal conductivity when used as a filler in polymers or lubricants. Features of BN include thermal conductor, electrica.. |
|||
Particle Size | 13 - 21 µm | 13 - 21 µm | MV |
H.C. Starck Amperit® 554.071 Tungsten Carbide-Cobalt-Chromium 86-10-4 (WC-Co-Cr) |
|||
Particle Size | 13 µm | 13 µm | |
Silberline "A" Series A-226 A-226 is a fine, non-leafing aluminum pigment with good opacity for solvent based industrial coatings. This grade has a cornflake geometry and wide particle size distribution range. This grade can b.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline SilBerCote® PC 8152Z SilBerCote® PC Z can be formulated into post-blend and bonded metallic powder coatings. The organic surface treatment on the flake imparts improved chemical and environmental resistance propertie.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Sil-O-Wet® 270NL-PA Sil-O-Wet® grades are leafing and non-leafing aluminum pigment pastes carried in isopropyl alcohol in which the aluminum flakes have been chemically treated to reduce the aluminum-water reaction... |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Sparkle Silver® 6246-AR Sparkle Silver® 6246-AR has a high degree of flake orientation in coatings. It offers a rich, smooth, silver finish with excellent distinctiveness of image (D.O.I.) and gloss, yet it also has an .. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Stamford "P" Stamford P is a standard polished grade; class "B", medium sized, leafing aluminum pigment carried in mineral spirits.Applications: Trade & Maintenance |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Tufflake® 4700 Tufflake® aluminum pigments are circulation-resistant, specifically designed to withstand mechanical forces and maintain their target appearance. They are primarily used in automotive coating app.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Tufflake® 4850 Tufflake® aluminum pigments are circulation-resistant, specifically designed to withstand mechanical forces and maintain their target appearance. They are primarily used in automotive coating app.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Tufflake® 5843 Tufflake® aluminum pigments are circulation-resistant, specifically designed to withstand mechanical forces and maintain their target appearance. They are primarily used in automotive coating app.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Aquavexâ„¢ 504AR-207S Aquavexâ„¢ grades are aluminum pigment pellets designed for use in aqueous inks for flexographic and gravure printing. The pellets are composed of 80% aluminum pigment and 20% of a proprietary no.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Silvet® AD 2000 LT20316 Silvet® AD grades are non-leafing aluminum pigments designed for use in solvent borne flexographic and gravure inks to provide optimal adhesion to polymer films and other substrates. They are sim.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Sparkle Silver® Premier 533AR Sparkle Silver® Premier flakes provide more uniform surfaces than Sparkle Silver® products, and also sharper edges and controlled particle size distribution. "Sparkle Silver® Premier or Sil.. |
|||
Particle Size | 13 µm | 13 µm | |
Silberline Sparkle Silver® Premier 683 Sparkle Silver® Premier flakes provide more uniform surfaces than Sparkle Silver® products, and also sharper edges and controlled particle size distribution. "Sparkle Silver® Premier or Sil.. |
|||
Particle Size | 13 µm | 13 µm | at a density of 1.90 g/cc, pressure 2.5 t/cc |
TIMCAL TIMREX® KS15 Primary Synthetic Graphite TIMREX Primary Synthetic Graphite is produced in a unique highly controlled graphitization process which assures narrow specifications and unequalled consistent quality due to: monitoring of all pro.. |
|||
Particle Size | 13 µm | 13 µm | at a density of 1.90 g/cc, pressure 2.5 t/cc |
TIMCAL TIMREX® KS44 Primary Synthetic Graphite TIMREX Primary Synthetic Graphite is produced in a unique highly controlled graphitization process which assures narrow specifications and unequalled consistent quality due to: monitoring of all pro.. |
|||
Particle Size | 13 µm | 13 µm | at a density of 1.90 g/cc, pressure at 2.5 t/cc |
TIMCAL TIMREX® KS5-44 Primary Synthetic Graphite TIMREX Primary Synthetic Graphite is produced in a unique highly controlled graphitization process which assures narrow specifications and unequalled consistent quality due to: monitoring of all pro.. |
|||
Particle Size | 13 µm | 13 µm | D90 (Malvern) Size D |
Vesta Ceramics SicoMill® Grade 2 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | 13 µm | 13 µm | D90 (Malvern) Size D |
Vesta Ceramics SicoMill® Grade 4 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% |
BYK Cloisite® 10A Nanoclay Cloisite® 10A is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.
Information provided by Southern Clay ProductsSouthern Clay P.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% |
BYK Cloisite® 15A Nanoclay Cloisite® 15A is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.Information provided by Southern Clay ProductsSouthern Clay Pr.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% |
BYK Cloisite® 20A Nanoclay Cloisite® 20A is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.Information provided by Southern Clay ProductsSouthern Clay Pr.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% |
BYK Cloisite® 25A Nanoclay Cloisite® 25A is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.Information provided by Southern Clay ProductsSouthern Clay Pr.. |
|||
Particle Size | 13 µm | 13 µm | |
Asahi Glass Fluon® L169J PTFE Lubricant Fluon®PTFE lubricants are used as additive to plastics, rubbers, paints, greases and so on. Frictional resistance decreases and non-stick increases on the applied surface.Information provided by As.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% |
BYK Cloisite® 30B Nanoclay Cloisite® 30B is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.
Information provided by Southern Clay ProductsSouthern Clay P.. |
|||
Particle Size | <= 13 µm | <= 13 µm | 90% |
BYK Cloisite® Na+ Nanoclay Cloisite® Na+ is an additive for plastics to improve various plastic physical properties, such as reinforcement, HDT, CLTE and barrier.Information provided by Southern Clay ProductsSouthern Clay Pr.. |