Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | 25 µm | 25 µm | Median Diameter |
Omya TITAN® 200 - LU Calcium Carbonate An intermediate, dry ground calcium carbonate with a closely controlled particle size distribution.Applications: For use in latex compounds.Information supplied by Omya North America. |
|||
Particle Size | 25 µm | 25 µm | D<sub>50</sub>; ISO 13320-1 |
Victrex® PEEK 150XF Polyetheretherketone, Unreinforced Product Description:High performance thermoplastic material, unreinforced Polyetheretherketone (PEEK), semi crystalline, fine powder for compression moulding, easy flow, FDA food contact compliant, .. |
|||
Particle Size | 25 µm | 25 µm | Geon® DFT 1466; Internal Method |
PolyOne Geon™ 210 Series 215 Blending Resin Polyvinyl Chloride Homopolymer (PVC Homopolymer) Geon® 215 is a low molecular weight particle size homopolymer blending resin intended for use in plastisol formulations. It improves air release performance resulting in reduced scrap rates. It dec.. |
|||
Particle Size | 25 µm | 25 µm | ASTM D4894 |
3M Dyneon™ TFM™ 1705 Modified PTFE Powder
(discontinued **) Type II, gr. 1 PTFE. Dyneon™ TFM™ 1705 PTFE is a second-generation modified polytetrafluoro-ethylene (PTFE) that maintains the exceptional chemical and heat resistance properties of first-generat.. |
|||
Particle Size | 25 µm | 25 µm | ASTM D4894 |
3M Dyneon™ CC174-N PTFE, 15% Fiberglass/Moly Filled
(discontinued **) Product Form: Gray, non-pelletized powder. Applications include bearings, rider rings, and packings.Data provided by Dyneon. |
|||
Particle Size | <= 25 µm | <= 25 µm | |
Ferro EG 0024 Specialty Glass Glass Type: Si-B-MG-Al Typical Powder Form: VWG Typical Application: Sintering Aid Ferro offers a wide range of compositions for specialty applications including sintering aids used in the glass-ph.. |
|||
Particle Size | <= 25 µm | <= 25 µm | |
Ferro EG 2778 Thick Film Glass Glass Type: Si-Al-Ca Typical Powder Form: MVG Typical Application: Dielectric Ferro produces standard and custom glass products that are used in thick film compositions including resistors, conduct.. |
|||
Particle Size | <= 25 µm | <= 25 µm | RWG Powder |
Ferro IP 760 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
Particle Size | <= 25 µm | <= 25 µm | RWG Powder |
Ferro IP 830 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
Particle Size | <= 25 µm | <= 25 µm | MVG Powder |
Ferro IX 2218 Passivation Glasses - High Voltage (Zn-B-Silicates) Typical Powder Form: REG, MVG Zinc-Boro-Silicate passivation glasses are used for hermetic passivation of high voltage diodes, thyristors, and transistors. They provide high junction temperatures a.. |
|||
Particle Size | 25 - 35 µm | 25 - 35 µm | 90% |
H.C. Starck Amperit® 250.071 Water Atomized (NiCr 80-20) |
|||
Particle Size | 25 - 35 µm | 25 - 35 µm | 90% |
H.C. Starck Amperit® 512.059 Agglomerated Sintered Tungsten Carbide - Cobalt (WC-Co) 88-12 |
|||
Particle Size | 25 - 35 µm | 25 - 35 µm | |
Lucite International Colacryl ® B611 Acrylic Dental Resin Cold-curing denture repair resin with Methyl Methacrylate based copolymers. Features fast polymerisation, easy mixing, good clarity, short hydroflask cure cycles, and excellent pigment acceptance.I.. |
|||
Particle Size | <= 25 µm | <= 25 µm | |
Ferro EG 0002 Glazes and Sealants Glass Type: Si-Al-Ba Typical Powder Form: VWG Typical Application: SiC Ferro's electronic and specialty glass group has produced over 3,000 formulations. Many are used as protective and insulatin.. |
|||
Particle Size | <= 25 µm | <= 25 µm | |
Ferro EG 2791 Thick Film Glass Glass Type: Bi-Pb-Zn Typical Powder Form: MVG Typical Application: End Termination Ferro produces standard and custom glass products that are used in thick film compositions including resistors, co.. |
|||
Particle Size | <= 25 µm | <= 25 µm | MVG Powder |
Ferro EG 2928 Glaze and Sealant Glass Glass Type: Pb-Zn-B Typical Powder Form: VEG, MVG Typical Application: ZnO, Al2O3 Ferro's electronic and specialty glass group has produced over 3,000 formulations. Many are used as protective an.. |
|||
Particle Size | <= 25 µm | <= 25 µm | |
Ferro IP 530 Thick Film Glass Glass Type: Pb-Si-B-Al Typical Powder Form: RWG Typical Application: General Ferro produces standard and custom glass products that are used in thick film compositions including resistors, conducto.. |
|||
Particle Size | 25 µm | 25 µm | average |
Inhance Fluoro-Seal INHANCE® Si-8500 Polymer Alloy Product Description: INHANCE S i-8000 series polymer alloy consists of black, medium density, silicon carbide chemically modified for greater adhesion. This product was designed for alloying with v.. |
|||
Particle Size | 25 - 30 µm | 25 - 30 µm | Violet |
Solvay Chemicals Blue pigment Information provided by Solvay |
|||
Particle Size | 25 µm | 25 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies MicroFLON® 1437 Thermoplastic Grade PTFE Additive Used in high temperature engineering plastics.The addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear and abrasion... |
|||
Particle Size | 25 µm | 25 µm | |
UCAR Carbon UCAR® ATA Isostatic Molded Graphite Economical grade ATA is the lowest density version of isostatically molded, fine grain grade ATJ family of graphite materials.Typical Applications: ATA is used in general purpose applications where .. |
|||
Particle Size | 25 µm | 25 µm | |
UCAR Carbon UCAR® ATJ Isostatic Molded Graphite Isostatically molded ATJ has been an industry standard for many years. It is a fine grain, high strength material which can be machined to precise tolerances and a fine surface finish. Grade ATJ has.. |
|||
Particle Size | 25 µm | 25 µm | D90 (Malvern) Size C |
Vesta Ceramics SicoMill® Grade 4 Silicon Powder General Description:SicoMill® is a fine-grained silicon powder, specially developed for the ceramic industry. We have five standard grinding grades, but we can produce powders adapted to single cu.. |
|||
Particle Size | 25 µm | 25 µm | d90 |
TIMCAL TIMREX® MX25 Primary Synthetic Graphite TIMREX Primary Synthetic Graphite is produced in a unique highly controlled graphitization process which assures narrow specifications and unequalled consistent quality due to: monitoring of all pro.. |
|||
Particle Size | <= 25 µm | <= 25 µm | |
Chesterton 785 Parting Lubricant Description: Chesterton® 785 Parting Lubricant represents the newest generation of anti-seize compound. A proprietary blend of ultra-fine inorganic solid lubricants in a non-carbonizing, ashless sy.. |
|||
Particle Size | 25 µm | 25 µm | |
Asahi Glass Fluon® G192 PTFE Granular Powder Fluon®PTFE granular powders (molding powders) are used for the production of sheets, rods, billets and other general moldings.Information provided by Asahi Glass Company, Inc. |
|||
Particle Size | 25 µm | 25 µm | ASTM D4894 |
3M Dyneon™ TFM™ 1700 Modified PTFE Powder Type III, gr. 1 PTFE. Dyneon™ TFM™ 1700 PTFE is a second-generation modified polytetrafluoro-ethylene (PTFE) that maintains the exceptional chemical and heat resistance properties of first-genera.. |
|||
Particle Size | 25 µm | 25 µm | ASTM D4894 |
3M Dyneon™ CC085 Custom Fluoropolymer Compound
(discontinued **) This compound consists of a mixture of PPS and other proprietary fillers blended with PTFE.Information provided by Dyneon, A 3M Company |
|||
Particle Size | <= 25 µm | <= 25 µm | D97 |
Potters Industries A-Series Z-CEL® 8054 White Synthetic Sodium Aluminosilicate Microsphere Fine particle white spheres developed as filler for paints, coatings and films.Information provided by Potters Industries. |
|||
Particle Size | 25 µm | 25 µm | 95%, Laser diffraction; QSOP-5&75 |
Shamrock Technologies MicroFLON® 1437FG Thermoplastic Grade PTFE Additive Used in high temperature engineering plastics; food contactThe addition of micronized polytetrafluoroethylene (PTFE) powder to polymeric resins provides greatly increased resistance to surface wear .. |