Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | 1.5 - 2.5 µm | 1.5 - 2.5 µm | |
Nabaltec NABALOX® NO 615-10 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | >= 1.5 µm | >= 1.5 µm | Primary Crystal Size |
Nabaltec NABALOX® NO 615-30 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | 1.5 - 2.5 µm | 1.5 - 2.5 µm | |
Nabaltec NABALOX® NO 625-10 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | >= 1.5 µm | >= 1.5 µm | Primary Crystal Size |
Nabaltec NABALOX® NO 625-30 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | >= 1.5 µm | >= 1.5 µm | Primary Crystal Size |
Nabaltec NABALOX® NO 625-31 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | 1.5 µm | 1.5 µm | |
Polyplastic Armoflen® PO MF 65-1 Linear Low Density Polyethylene, 65% Calcium Carbonate Information provided by PolyPlastic Group. |
|||
Particle Size | 1.5 µm | 1.5 µm | |
Polyplastic Armoflen® PO MF 65-2 Linear Low Density Polyethylene, 65% Calcium Carbonate Information provided by PolyPlastic Group. |
|||
Particle Size | 1.5 µm | 1.5 µm | |
Polyplastic Armoflen® PO MF 65-3 Polyethylene, 65% Mineral Filled 50% Calcium Carbonate / 15% Titanium Oxide FilledInformation provided by PolyPlastic Group. |
|||
Particle Size | 1.5 µm | 1.5 µm | mean aggregate size |
NanoScale NanoActive® Aluminum Oxide NanoActive Al2O3 is produced using proprietary processes to obtain high specific surface area, low density, amorphous material with high adsorption capacity and chemical reactivity. NanoActive Al2O3.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro EG 0221 Specialty Glass Glass Type: MG-Al-Si (devitrified) Typical Powder Form: MVG, SRRG Typical Application: Sintering Aid / Ceramic Ferro offers a wide range of compositions for specialty applications including sinteri.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro EG 0225 Specialty Glass Glass Type: MG-Al-Si (devitrified) Typical Powder Form: MVG, SRRG Typical Application: Sintering Aid / Ceramic Ferro offers a wide range of compositions for specialty applications including sinteri.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 760 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 780 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 820 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 830 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 900 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Si-Pb-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to a.. |
|||
Particle Size | 1.5 - 2.5 µm | 1.5 - 2.5 µm | Average Particle Size/Laser Diffraction D50 |
H.C. Starck Grade F Titanium Diboride, TiB2 Powder for sintering.Hot-pressed composites of excellent electrical conductivity, e.g., evaporation boats for continuous aluminum metallizingCrucible material for non-ferrous metalsCeramic shapes to.. |
|||
Particle Size | 1.5 - 3.0 µm | 1.5 - 3.0 µm | Laser Diffraction D50 |
H.C. Starck Grade II Amorphous Boron Automotive (igniter in airbags and belt tighteners)Additive in pyrotechnic mixtures (flares, igniters, and delay compositions)Additive in solid rocket propellant fuels and explosivesPreparation of r.. |
|||
Particle Size | 1.5 µm | 1.5 µm | Average Particle Size/Laser Diffraction D50 |
H.C. Starck Grade S Silicon Nitride, Si3N4 Alpha phase > 84%. Standard and cost effective grade.Ceramic cutting toolsHeavy duty components in automotive enginesHigh performance parts for mechanical engineeringBearing components, like high pr.. |
|||
Particle Size | 1.5 µm | 1.5 µm | Average Particle Size/Laser Diffraction D50 |
H.C. Starck Grade ST Silicon Nitride, Si3N4 Alpha phase > 84%. Standard and cost effective grade.Ceramic cutting toolsHeavy duty components in automotive enginesHigh performance parts for mechanical engineeringBearing components, like high pr.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 730 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
Particle Size | 1.5 µm | 1.5 µm | 50% of particles, (SRRG Powder) |
Ferro IP 745 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates) Glass Type: Pb-B-Si-Al Typical Powder Form: TF, REG, RWG, SRRG Ferro's passivation glasses are designed for use on transistors, thyristors, and diodes. These products are formulated and produced to.. |
|||
Particle Size | 1.5 - 3.0 µm | 1.5 - 3.0 µm | Average Particle Size/Laser Diffraction D50 |
H.C. Starck Grade B Zirconium Diboride, ZrB2 Hot-pressed composites of excellent electrical conductivity, e.g., evaporation boats for continuous aluminum metallizingCrucible material for non-ferrous metalsCeramic shapes to be used in productio.. |
|||
Particle Size | 1.5 - 4.0 µm | 1.5 - 4.0 µm | Laser Diffraction D50 |
H.C. Starck Grade D Titanium Carbonitride Narrow grain distribution and low oxygen contentHard metals (tooling and machining)CermetsBlack ceramics |
|||
Particle Size | 1.5 µm | 1.5 µm | Grain Size; Intercept Method |
CoorsTek ADSR-96R DuraStrate™ 96% Alumina Thick Film Applications: thick films and lasers |
|||
Particle Size | 1.5 µm | 1.5 µm | |
Dow Latex LXC 8283NAP Carboxylated Styrene-Butadiene Latex Applications: Latex LXC 8283NAP for carpet is a soft latex with exceptional hand specifically for the rug market.Benefits: Soft handExcellent filler acceptanceGood compatibility with other latexesIn.. |
|||
Particle Size | 1.5 µm | 1.5 µm | @ 10% |
CIMBAR CLEAR-BLOC® 80 Antiblock Talc CLEAR-BLOC® 80 talc, produced from high purity ore provides high brightness, clarity, low iron content and low surface area for primary use as an anti-block additive in LDPE and LLDPE film applicat.. |
|||
Particle Size | 1.5 µm | 1.5 µm | @ 10% |
CIMBAR RiverCal™ 8103 & 8103C Calcium Carbonate (CaCO3) RiverCal™ 8100 Series Calcium Carbonate are high purity, white, functional fillers targeted for use in thermosets, thermoplastics, paint & coatings, sealants, TPO's and TPE's and other applications.. |
|||
Particle Size | 1.5 µm | 1.5 µm | @ 10%; Micrometrics Sedigraph 5100 |
CIMBAR RP 9310 Talc RP 9300 Series talcs are produced from high purity ores, which provide an excellent balance of color and mechanical properties, for primary use in commodity polypropylene and polyester compounds. R.. |
|||
Particle Size | 1.5 µm | 1.5 µm | |
Astro Met ZTA 96 Zirconia Toughened Alumina General Description:ZTA-96 is a zirconia toughened alumina ceramic that exhibits excellent wear and corrosion resistance along with high strength and toughness. Astro Met has developed ZTA-96 zircon.. |