Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.320 g/cc | 0.0116 lb/in³ | ASTM D3574 |
Rogers Corporation Bisco™ HT-800 Cellular Silicone Foam Medium grade silicon sponge. UL recognized for flame retardance and gasketing.Applications: HID (High Intensity Discharge) lighting fixture gaskets, Battery cushion in hand-held electronic products.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ASTM D3574-95 Test A |
Rogers Corporation Poron® 4701-30-20064 P Urethane Foam, Very Soft, Supported with Clear Polyester Film Very soft, easily compressed for use where flexibility is a key requirement. Contains PET film reinforcement. Standard available thickness 0.064"Features and Benefits of PORON Products: Excelle.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ASTM D3574-95 Test A |
Rogers Corporation Poron® 4701-41-20 Urethane Foam, Soft, Enhanced Sealability Soft, enhanced sealability material offering greater closed-cell content for demanding vacuum sealing applications or low closure-force requirements. Standard available thickness range from 0.031".. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | Effective Density as measured by liquid displacement |
Potters Industries Q-Cel® 5032S Hollow Engineered Glass Microspheres Q-CEL® hollow glass microspheres are alternatives to conventional fillers and additives such as silicas, calcium carbonates, talc, clay, etc. A variety of particle sizes, densities and strengths me.. |
|||
Density | 0.321 g/cc | 0.0116 lb/in³ | Foamed |
Polimeros Mexicanos Rotofoam® Plus 93050 Medium Density Polyethylene, Foam Grade Hexene Copolymer Linear Medium Density Polyethylene for foaming applications. It is formulated for inner layers with excellent foam cell structure and smooth surface finish and uniform closed cells... |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | Free Rise Density |
Northstar Polymers MPL-R20B Rigid Polyurethane Foam Formulation This rigid polyurethane foam system is one of a family of polymer systems developed by Northstar Polymers for specific applications. Urethane foams molded with this system exhibit closed cell struct.. |
|||
Density | 0.320 - 0.400 g/cc | 0.0116 - 0.0145 lb/in³ | ASTM D1505 |
PolyOne Geon™ 120 Series 129 Polyvinyl Chloride Homopolymer The value set forth represent typical values and PolyOne Corporation, therefore, makes no representation that the material in any particular shipment will conform to the listed properties. Packaging.. |
|||
Density | 0.320 - 0.400 g/cc | 0.0116 - 0.0145 lb/in³ | ASTM D1505 |
PolyOne Geon™ 170 Series 179 Polyvinyl Chloride Homopolymer (PVC Homopolymer) Note: Plastisol Formulation F1 consists of 100 parts of this resin + 60 parts DOP. Note: Plastisol Formulation F2 consists of 100 parts of this resin + 57 parts DOP + 3 parts ESO + 2 parts Synpron®.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ASTM D3574A |
Mearthane Durethaneâ„¢ M DM-710A Foam Polyurethane MDI backbone: ether.Shore 00 Hardness: 55Summary: Durethane M is a flexible, microcellular, open cell and closed cell urethane foam. Because it is mechanically mixed, the cell size is uniform. Dur.. |
|||
Density | 0.320 - 0.350 g/cc | 0.0116 - 0.0126 lb/in³ | |
Microtherm Group Molded Pipe Sections Filament Reinforced Silica Pipe Insulation Microtherm® Moulded Pipe Sections (MPS) are preformed pieces of pipe insulation designed to provide a thermally efficient insulation system for piping of all sizes from 25 mm (1â€) upwards. F.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | |
Sawbones Cellular Rigid Polyurethane Foam 20 pcf Density Cellular Rigid Polyurethane FoamPrimary UseCellular rigid polyurethane foam is primarily used as an alternative test medium for human cancellous bone. Its outward appearance matches cancellous bone .. |
|||
Density | 0.320 - 0.400 g/cc | 0.0116 - 0.0145 lb/in³ | Dry |
Unifrax Fiberfrax® FC-25 Tamping Mix Casting Mix Fiberfrax FC-25 tamping mix and Vari-Form™ castable materials provide casting mixes which can be applied in small areas such as furnace access and site doors, tube sheets, and as a refractory backu.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ASTM D792 |
Covestro Baydur® 646 Polyurethane Structural Foam RIM, Density 20 pcf, MDI-based 2-Component Liquid System 0.25 in. thickness. RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and of.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | |
3M 12050 Black 1/2" (12.7 mm) Polyurethane Foam High flexibility and conformability for secure seals and effective sound damping without crumbling or embrittlement Choice of medium or high density Low water absorption and good solvent resistance .. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ASTM D3574 |
3M 4508 Foam Tape Use these tapes to protect products from the elements of destruction. Two different backing/adhesive combinations meet demanding applications requiring gasketing, baffling, cushioning, and insulatio.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | foam with adhesive; ASTM D3574 |
3M 4516 Single-Coated Foam Tape 3M™ Single-Coated Foam Tapes will adhere to a variety of substrates, including latex-painted wood, lacquered wood, enameled steel, glass, aluminum, stainless steel, acrylic, ABS, and PVC (non-plast.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | Typical, 3M QCM 14.24.6 |
3M HGS2000 Glass Bubbles 3M™ Glass Bubbles HGS Series are engineered hollow glass spheres for use as a density reducing agent for oil and gas drilling fluids and drilling cements. The spherical shape of 3M glass bubbles of.. |
|||
Density | 0.320 - 0.380 g/cc | 0.0116 - 0.0137 lb/in³ | True, 3M QCM 14.24.6 |
3M HGS3000 Glass Bubbles 3M™ Glass Bubbles HGS Series are engineered hollow glass spheres for use as a density reducing agent for oil and gas drilling fluids and drilling cements. The spherical shape of 3M glass bubbles of.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | Foam |
Aptek DI-STRATE 95210 Microwave/RF Foam Substrate DI-STRATE™ Tiles are fully-crosslinked, low density, composite foam substrates which exhibit a low characteristics in the microwave frequency range.Uses: Space AntennasInformation provided by Aptek.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | |
3M 12046 Black 1/16" (1.6 mm) Polyurethane Foam High flexibility and conformability for secure seals and effective sound damping without crumbling or embrittlement Choice of medium or high density Low water absorption and good solvent resistance .. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | apparent nominal; ASTM C271 |
3A Composites Core Materials AIREX® PXc.320 Fiber-Reinforced Structural Foam AIREX® PXc is a closed-cell, fiber reinforced polymer foam with very high mechanical properties ideally suited as core material for structurally loaded sandwich applications. The sophisticated manu.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | Nominal |
Unifrax Fiberfrax® Rope Fiberfrax textile products are durable, high temperature, ceramic fiber packing materials that are well-suited for industrial applications. They are noted for their superior insulating and sealing .. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ±10%; ASTM D3574A |
Rogers Corporation Poron® 4701-40-20 Cellular Urethane Foam Standard color is black (04); others are available. Passes flammability tests UL HBF (File E20305), MVSS 302, and CSA Component Acceptance HBF (File 188149). Passes fogging test SAE-J 1736 for 3 h.. |
|||
Density | 0.320 g/cc | 0.0116 lb/in³ | ±10%; ASTM D3574A |
Rogers Corporation Poron® 4701-50-20 Cellular Urethane Foam Standard color is black (04); others are available. Passes flammability tests UL HBF (File E20305), MVSS 302, and CSA Component Acceptance HBF (File 188149). Passes fogging test SAE-J 1736 for 3 h.. |