Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 7.85 g/cc | 0.284 lb/in³ | Sintered |
Kinetics MIM F15 (Kovarâ„¢) Low CTE Alloy High nickel, high cobalt iron alloy. A traditional metal-to- glass sealing alloy that offers a low coefficient of thermal expansion (CTE) similar to glass. Provides the hermeticity required for firm.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Industeel Superplast® SP300 Prehardened Mold Steel Superplast® 300 (SP300) is a prehardened steel with a BHN 300 (32 HRC) to be used for plastic injection molds, extrusion dies, and compression molds offering improved performance for the mold mak.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | Sintered |
Kinetics MIM 316 Stainless Steel (Standard Grade) Austenitic stainless steel. Excellent corrosion resistance. Non-magnetic. Lower cost, elongation, and ductility than “premium†grade. Often used for food industry, marine, medical, and app.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Indium Corp. Indalloy 112 Tin-Lead Solder Alloy Information Provided by Indium Corporation |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Indium Corp. Indalloy® 2 In-Pb-Ag Solder Alloy Especially useful for soldering against gold, as leaching is minimized. Good thermal fatigue properties. Compatible with Indalloy numbers 204, 205, 206, 7, 10 and 150 in step-soldering applications... |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Special Metals NIMONIC® Alloy 115 A precipitation-hardenable nickel-chromium-cobalt alloy with an addition of molybdenum for solid-solution strengthening. It is similar to NIMONIC alloy 105 but has higher levels of aluminum and tit.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
ThyssenKrupp XABO® 355 Structural Steel This Material Specification applies to thermomechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
ThyssenKrupp XABO® 500 T Structural Steel This Material Specification applies to thermo mechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Williams Advanced Alloys WS149 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Williams Advanced Alloys WS199 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
ThyssenKrupp XABO® 355 T Structural Steel This Material Specification applies to thermomechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
ThyssenKrupp XABO® 500 Structural Steel This Material Specification applies to thermo mechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Crucible Steel CPM® 1V® High Alloy Tool Steel CPM 1V is a medium carbon, high alloy tool steel which exhibits high toughness combined with high heat resistance. It is suited for both hot or cold applications which demand high impact toughness a.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
Bohler-Uddeholm BÖHLER M268 VMR® Plastic Mold Steel Description: HBÖHLER M268 VMR is a hardened and tempered plastic mould steel with excellent cleanliness for best polishability. The hardness is constant over the entire cross-section of the steel b.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
AIM 80In/Pb15/Ag5 Solder for Photonic Packaging Uses include:Fiber to Ferrule SolderingLaser Die AttachHermetic Packaging & SealingWetting & Sealing Laser OpticsThermal ManagementInformation provided by AIM Specialty Materials. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | Typical Carbon Steel |
AK Steel ASTM A 463 / SAE J1392 040 AHK, Grade 40 Aluminized Carbon Steel, Structural Steel (SS) Aluminized Type 1 coating contains approximately 91% aluminum and 9% silicon that is metallurgically bonded to the low-carbon steel substrate.Information provided by AK Steel |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | Typical Carbon Steel |
AK Steel SAE J1392 050 XLK, Grade 50 Aluminized Carbon Steel, High Strength Low Alloy Steel (HSLAS) Aluminized Type 1 coating contains approximately 91% aluminum and 9% silicon that is metallurgically bonded to the low-carbon steel substrate.Information provided by AK Steel |
|||
Density | 7.85 g/cc @Temperature 23.0 °C |
0.284 lb/in³ @Temperature 73.4 °F |
|
Carpenter Gall-Tough® Stainless Data provided by Carpenter Technology Corporation.6.4 mm diameter tensile specimens from center of 25.4 mm diameter bar annealed 1066°C 1 hour, water quenched, and ground.Threshold Galling Stress 1.. |
|||
Density | 7.85 g/cc @Temperature 23.0 °C |
0.284 lb/in³ @Temperature 73.4 °F |
|
Carpenter Gall-Tough® Stainless, Annealed and Cold Drawn Bar, 20% Cold Work Data provided by Carpenter Technology Corporation.Threshold Galling Stress 103 MPa (higher stress tests not performed). The avg. total volume loss on the wear test is 5 mm³ at 100 rpm.Gall-Tough®.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | Typical Carbon Steel |
AK Steel Aluminized Carbon Steel, Commercial Steel (CS Type B), Standard Grade Aluminized Type 1 coating contains approximately 91% aluminum and 9% silicon that is metallurgically bonded to the low-carbon steel substrate. May be moderately formed. A specimen cut in any direc.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | Typical Carbon Steel |
AK Steel Aluminized Carbon Steel, Extra Deep Drawing Steel (EDDS), Standard Grade Aluminized Type 1 coating contains approximately 91% aluminum and 9% silicon that is metallurgically bonded to the low-carbon steel substrate. Interstitial Free (I-F) steels are made by adding tita.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | Typical Carbon Steel |
AK Steel Aluminized Carbon Steel, Extra Deep Drawing Steel Plus (EDDS+), Standard Grade Aluminized Type 1 coating contains approximately 91% aluminum and 9% silicon that is metallurgically bonded to the low-carbon steel substrate. Interstitial Free (I-F) steels are made by adding tita.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
ThyssenKrupp XABO® 460 Structural Steel This Material Specification applies to thermo mechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-.. |
|||
Density | 7.85 g/cc @Temperature 23.0 °C |
0.284 lb/in³ @Temperature 73.4 °F |
|
Carpenter Gall-Tough® Stainless, Annealed and Cold Drawn Bar, 10% Cold Work Data provided by Carpenter Technology Corporation.Threshold Galling Stress 103 MPa (higher stress tests not performed). The avg. total volume loss on the wear test is 5 mm³ at 100 rpm.Gall-Tough®.. |
|||
Density | 7.85 g/cc | 0.284 lb/in³ | |
ThyssenKrupp XABO® 460 T Structural Steel This Material Specification applies to thermo mechanically rolled flat products in thicknesses up to 60 mm. The criteria to distinguish the steel grades is the lowest test temperature for the notch-.. |
|||
Density | 7.85 g/cc @Temperature 23.0 °C |
0.284 lb/in³ @Temperature 73.4 °F |
|
Carpenter Gall-Tough® Stainless, Annealed and Cold Drawn Bar, 0% Cold Work Data provided by Carpenter Technology Corporation.Threshold Galling Stress 103 MPa (higher stress tests not performed). The avg. total volume loss on the wear test is 5 mm³ at 100 rpm.Gall-Tough®.. |