TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N774 Filler

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer	TSE Industries, Inc
Trade Name	Millathane®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 75 PHR N774 Filler.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subjected to high wear in service. It has a unique combination of excellent properties, such as low temperature characteristics, and resistance to heat deterioration, ozone cracking, weathering and swelling in oils or solvents.FormulationMillathane CM 100.0N77475.0Coumarone-Indene Resin25.0MBTS4.0MBT1.0Sulfur0.75CAYTUR 40.35Zinc Stearate0.50All information provided by TSE Industries

Physical Properties	Metric	English	Comments
Specific Gravity	1.27 g/cc	1.27 g/cc
Mooney Viscosity	37 @Temperature 121 °C	37 @Temperature 250 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	75	75
Tensile Strength, Yield	23.1 MPa	3350 psi
Elongation at Yield	520 %	520 %
100% Modulus	0.00431 GPa	0.625 ksi
300% Modulus	0.0169 GPa	2.45 ksi
Tear Strength	67.0 kN/m	382 pli	Graves
Abrasion	150	150	NBS Index
Compression Set	19 %	19 %	Method B

Processing Properties	Metric	English	Comments
Cure Time	60.0 min @Temperature 142 °C	1.00 hour @Temperature 287 °F

Users viewing this material also viewed the following: