TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 10.0 PHR Cumar P10 Plasticizer

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 10.0 PHR Cumar P10 Plasticizer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Millathane® 76 is a very suitable choice for use in products such as bushings, small copier rolls; automotive applications — bumpers, o-rings, hydraulic seals, belts, gaskets, solid tires — and many other high performance polyurethane applications. Millathane 76 can be vulcanized by sulfur or peroxide cured systems.Plasticizers should be used in all Millathane®76 compounds to better incorporate fillers and improve processing. Some plasticizers are not compatible with Millathane76, e.g. naphthenic and all paraffinic oils, however, a number of ester plasticizers perform very well.FormulationMillathane 76 100.0Zinc Stearate0.5N-550 Black40.0MBTS4.0MBT2.0Thanecure® ZM1.0Sulfur1.5Plasticizer10.0All information provided by TSE Industries

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	62	62
	80	80	heat aged 70 hours @ 100ºC
Tensile Strength, Yield	22.54 MPa	3269 psi
Elongation at Yield	621 %	621 %
100% Modulus	0.00230 GPa	0.334 ksi
200% Modulus	0.00489 GPa	0.709 ksi
300% Modulus	0.008301 GPa	1.204 ksi
Tear Strength	56.4 kN/m	322 pli	Die C
Compression Set	35.8 % @Temperature 70.0 °C, Time 79200 sec	35.8 % @Temperature 158 °F, Time 22.0 hour

Processing Properties	Metric	English	Comments
Cure Time	7.00 min @Temperature 155 °C	0.117 hour @Temperature 311 °F

Descriptive Properties	Value	Comments
Weight Loss (%)	5	heat aged 70 hours @ 100ºC

Users viewing this material also viewed the following: