- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Molded
- Sylvin Technologies 9077-75 Natural PVC for Injection Molding
Sylvin Technologies 9077-75 Natural PVC for Injection Molding
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Molded |
| Manufacturer | Sylvin Technologies |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Sylvin Technologies 9077-75 Natural PVC for Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Sylvin Technologies Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.37 g/cc | 1.37 g/cc | |
| Thickness | 1000 microns | 39.4 mil |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 75 | 75 | 10 seconds |
| Tensile Strength, Ultimate | 8.62 MPa | 1250 psi | |
| Elongation at Break | 290 % | 290 % |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 50.0 °C | 122 °F | RTI |
| Flammability, UL94 | HB | HB |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 163 - 174 °C | 325 - 345 °F |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Wire & Cable W9400L Polyvinyl Chloride, Flexible (PVC, Flexible)
- Resinlab® CYNERGY CA6901 Adhesive
- Solvay Specialty Polymers Veradel® 3600P Polyethersulfone (PESU)
- Techmer ES HiFill® PPS GF/M55 BK 55% Glass/Mineral Filled
- ExxonMobil LDPE LD 506.07 Low Density Polyethylene Resin
- DuPont Teijin Films Teijin® Tetoron® S Polyester Film, 150 Gauge
- AK Steel ZINCGRIP® ELECTRASMOOTH® Electrogalvanized Carbon Steel, Dent Resistant (DR 210)
- Alliance S-26B Samarium Cobalt Magnetic Material
Copyright © lookpolymers.com All Rights Reserved