- HOME
- POLYMER SEARCH
- Fluid
- Solvay Specialty Polymers Galden® HT80 PFPE Heat Transfer Fluid
Solvay Specialty Polymers Galden® HT80 PFPE Heat Transfer Fluid
| Category | Fluid , Polymer |
| Manufacturer | Solvay Specialty Polymers (former Solexis) |
| Trade Name | Galden® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Galden® HT80 PFPE Heat Transfer Fluid.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Galden® HT grades are specifically recommended for use as heat transfer fluids.Galden® PFPE is a line of high-performance, inert, fluorinated fluids. Various grades, with a variety of service temperature ranges, are available. Uses include heat transfer, electronic reliability testing, vapor phase soldering, solvents, and acid spill mitigation.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.69 g/cc @Temperature 25.0 °C |
0.0611 lb/in³ @Temperature 77.0 °F |
|
| Solubility of Water | 0.0014 % | 0.0014 % | |
| Kinematic Viscosity | 0.57 cSt @Temperature 25.0 °C |
0.57 cSt @Temperature 77.0 °F |
|
| 0.83 cSt @Temperature 0.000 °C |
0.83 cSt @Temperature 32.0 °F |
||
| 1.22 cSt @Temperature -20.0 °C |
1.22 cSt @Temperature -4.00 °F |
||
| 2.0 cSt @Temperature -40.0 °C |
2.0 cSt @Temperature -40.0 °F |
||
| Molecular Weight | 430 g/mol | 430 g/mol | average |
| Vapor Pressure | 0.140 bar @Temperature 25.0 °C |
105 torr @Temperature 77.0 °F |
|
| Surface Tension | 16 dynes/cm | 16 dynes/cm |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Heat of Vaporization | 71.1 J/g @Temperature 80.0 °C |
30.6 BTU/lb @Temperature 176 °F |
at boiling point |
| CTE, linear | 367 µm/m-°C | 204 µin/in-°F | converted from volumetric expansion of 0.0011 cm<sup>3</sup>/cm<sup>3</sup>-°C |
| Specific Heat Capacity | 0.960 J/g-°C | 0.229 BTU/lb-°F | |
| Thermal Conductivity | 0.0650 W/m-K | 0.451 BTU-in/hr-ft²-°F | |
| Boiling Point | 80.0 °C | 176 °F | |
| Maximum Service Temperature, Air | 80.0 °C | 176 °F | as heat transfer fluid |
| Minimum Service Temperature, Air | -75.0 °C | -103 °F | as heat transfer fluid |
| Pour Point | <= -110 °C | <= -166 °F |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.280 | 1.280 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.50e+15 ohm-cm | 1.50e+15 ohm-cm | |
| Dielectric Constant | 1.89 @Frequency 1000 Hz |
1.89 @Frequency 1000 Hz |
|
| Dielectric Strength | 15.7 kV/mm | 399 kV/in | 2.54 mm gap |
| Dissipation Factor | 0.00020 @Frequency 1000 Hz |
0.00020 @Frequency 1000 Hz |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Solubility of Air (cm³ gas / 100 cm³ liquid) | 26 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics LNP LUBRICOMP DFL12 PC
- LG Chemical LUPOY GP-5000FQ General Purpose PC/ABS Alloy, Unreinforced, Excellent Flow
- KYDEX® 110 Metallic Thermoplastic Fire-rated Sheet
- Shakespeare NX-811 Economy Nylon Copolymer Fishing Line, 6 lb
- Shin-Etsu Silicones KE-1833 Silicone, RTV Adhesive/Sealant
- Saint-Gobain CHR® SG25-06(R) Primary Glass-PTFE Backing Silicone Adhesive Pressure Sensitive Tape
- A. Schulman SCHULAMID® 66 MV3H Unreinforced Nylon 6/6
- Daikin POLYFLON MG-1241F PTFE 20% Glass Fiber and 5% Graphite Filled Molding Powder, High Apparent Density, Free Flow
- ExxonMobil Febis K Series 32
- DuPont Performance Polymers Crastin® CE2055 BK580 PBT (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved