- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Molded
- Solvay Specialty Polymers Algoflon® F 5/S Polytetrafluoroethylene (PTFE)
Solvay Specialty Polymers Algoflon® F 5/S Polytetrafluoroethylene (PTFE)
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Molded |
| Manufacturer | Solvay Specialty Polymers |
| Trade Name | Algoflon® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Algoflon® F 5/S Polytetrafluoroethylene (PTFE).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Algoflon® F 5/S is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with high filler content. This material exhibits high bulk density, tensile strength and elongation at break. Black compounds based on Algoflon® F5/S show optimum isotropic behavior and therefore excellent longitudinal mechanical properties.Features: Good Chemical ResistanceUses: Additive; BlendingInformation provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.16 g/cc | 0.0780 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.410 g/cc | 0.0148 lb/in³ | ASTM D4894 |
| Water Absorption | 0.00 % | 0.00 % | ASTM D570 |
| Particle Size | 15 µm | 15 µm | Internal Method |
| Linear Mold Shrinkage | 0.031 cm/cm | 0.031 in/in | Radial shrinkage of 10 cm o.d. sintered rod at 23°C |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 44.0 MPa | 6380 psi | ASTM D638 |
| Elongation at Break | 400 % | 400 % | ASTM D638 |
| Coefficient of Friction, Dynamic | 0.060 | 0.060 | ASTM D1894 |
| Coefficient of Friction, Static | 0.080 | 0.080 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.240 W/m-K | 1.67 BTU-in/hr-ft²-°F | ASTM C177 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous Service |
| Flammability, UL94 | V-0 | V-0 | VE-0 |
| Oxygen Index | >= 95 % | >= 95 % | ASTM D2863 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+18 ohm-cm | 1.00e+18 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.1 @Frequency 60.0 - 2.00e+9 Hz |
2.1 @Frequency 60.0 - 2.00e+9 Hz |
ASTM D150 |
| Dielectric Strength | 70.0 kV/mm | 1780 kV/in | Estimated from similar grades. ASTM D149 |
| Dissipation Factor | >= 0.00030 @Frequency 60.0 - 2.00e+9 Hz |
>= 0.00030 @Frequency 60.0 - 2.00e+9 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| FDA | Yes | Yes |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | FDA 21 CFR 177.1550 | |
| Availability | Asia Pacific; Europe | |
| Color | White | |
| Form | Powder |
Users viewing this material also viewed the following:
- Multibase TPSiV™ 1180-50D Thermoplastic Silicone Vulcanizate
- Freudenberg Simrit S70 Silicone Elastomer
- Glastic 1125 Corrosion-Resistant Panels
- Teknor Apex APEX® 94-A0098A-60 Polyvinyl Chloride, Flexible
- TIMET TIMETAL® 35A CP Titanium (ASTM Grade 1)
- Zircar Zirconia Buster Blanket Alumina Blanket Insulation
- Eastman DuraStar MN621 Polymer, Natural
- ExxonMobil Mobil Glygoyle 100
- Polyplastics Duracon® HP90X Acetal Co-polymer (POM), High stiffness, General
Copyright © lookpolymers.com All Rights Reserved