- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- SYNTHOS Kralex® 1500 Styrene Butadiene Rubber
SYNTHOS Kralex® 1500 Styrene Butadiene Rubber
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | SYNTHOS Kralupy a.s. |
| Trade Name | Kralex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | SYNTHOS Kralex® 1500 Styrene Butadiene Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
KRALEX® 1500 is a standard grade of styrene butadiene rubber. It is produced by a technology of cold emulsion polymerization based on soaps of rosin acids and contains 23.5% of chemically bonded styrene. It is coagulated by a system of acid and organic coagulant, does not contain extender oil and is stabilized by staining antioxidant.KRALEX® 1500 is appropriate for rubber compounds used in the production of car tires and inner tubes, conveyor belts, footwear, cables, hosepipes and various technical rubber articles.It is not approved for production of rubber articles coming into contact with foods or drinking water.Synthos was formerly known as Kaucuk.Synthos was formerly known as Kaucuk. All information provided by Synthos.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Volatiles | <= 0.75 % | <= 0.75 % | ASTM D5668 |
| Mooney Viscosity | 44 - 54 @Temperature 100 °C |
44 - 54 @Temperature 212 °F |
(1+4); ASTM D1646 |
| Ash | <= 0.40 % | <= 0.40 % | ASTM D5667 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 23.0 MPa | 3340 psi | 35'/145°C; ASTM D412 |
| Elongation at Break | 400 % | 400 % | 35'/145°C; ASTM D412 |
| 300% Modulus | 0.0130 - 0.0190 GPa | 1.89 - 2.76 ksi | 35'/145°C; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Acid Value | 5.0 - 7.5 | 5.0 - 7.5 | ASTM D5774 |
| Styrene Content | 23.5 % | 23.5 % | ASTM D5775 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| 50% of Vulcanization t' 50 (min.) | 6.5-10.5 | ASTM D5289 |
| Antioxidant Grade | Staining | |
| Compound Safety ts 1 (min.) | 2.2-4.0 | ASTM D5289 |
| Maximal Moment (dNm) | 19-22 | ASTM D5289 |
| Minimal Moment (dNm) | 2.1-2.8 | ASTM D5289 |
| Optimal Vulcanization t' 90 (min.) | 12-17 | ASTM D5289 |
| Soaps content (%) | <= 0.3 |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PH 49 GF 30 TS PP, 30% glass fibre, mod. of mech. Properties
- Momentive Performance Materials Silplusâ„¢ 70 HS High Strength Heat Cured Rubber
- Haynes 214® alloy, 20% cold reduction, 980°C (1800°F) for 5 minutes
- MRC Polymers NAXALOYâ„¢ 773 ABS + PC Alloy
- ChevronTexaco Regal® 460
- Chicago Extruded Metals BioBrass® UNS C95520 As-Cast Aluminum Bronze
- 3M Scotch™ 2228 Rubber Mastic Tape
- Styron Modifier A SB Latex
Copyright © lookpolymers.com All Rights Reserved