Polymer Resources PEI-G10 Polyetherimide, 10% Glass Reinforced (Unverified Data**)

Category	Polymer , Thermoplastic , Polyetherimide (PEI) , Polyetherimide (PEI), 10% Glass Fiber
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polymer Resources PEI-G10 Polyetherimide, 10% Glass Reinforced (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Process: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Information provided by Polymer Resources Corporation.

Physical Properties	Metric	English	Comments
Density	1.34 g/cc	0.0484 lb/in³	ASTM D792
Linear Mold Shrinkage	0.0040 - 0.0060 cm/cm	0.0040 - 0.0060 in/in	ASTM D955
Melt Flow	5.0 - 22 g/10 min	5.0 - 22 g/10 min	ASTM D1238

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	114 MPa	16500 psi	ASTM D638
Tensile Strength, Yield	114 MPa	16500 psi	ASTM D638
Flexural Strength	186 MPa	27000 psi	ASTM D790
Flexural Modulus	4.48 GPa	650 ksi	ASTM D790
Izod Impact, Notched	0.534 J/cm	1.00 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	207 °C	405 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	204 °C	400 °F	ASTM D648
Flammability, UL94	V-0	V-0	1/16 in
	V-0	V-0	1/8 in

Processing Properties	Metric	English
Rear Barrel Temperature	332 - 399 °C	630 - 750 °F
Middle Barrel Temperature	338 - 399 °C	640 - 750 °F
Front Barrel Temperature	343 - 399 °C	650 - 750 °F
Melt Temperature	338 - 399 °C	640 - 750 °F
Mold Temperature	107 - 177 °C	225 - 350 °F
Drying Temperature	143 - 149 °C	290 - 300 °F
Dry Time	4 - 6 hour	4 - 6 hour

Users viewing this material also viewed the following: