Category | Polymer , Thermoset , Phenolic , Phenolic, Novolac, Heat Resistant Grade, Filled |
Manufacturer | |
Trade Name | |
Port | Shanghai port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | Plenco 4100 Phenolic, Granular, Injection Molded (discontinued **).pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.48 g/cc | 0.0535 lb/in³ | ASTM D792 |
Apparent Bulk Density | 0.740 g/cc | 0.0267 lb/in³ | Apparent density per ASTM D1895 |
Water Absorption | 0.26 % | 0.26 % | ASTM D570 |
Linear Mold Shrinkage | 0.0080 cm/cm | 0.0080 in/in | per ATM D955. Post shrinkage is 0.26% at 72hr 120ºC per ASTM D1299. |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Hardness, Rockwell E | 80 | 80 | ASTM D785 |
Tensile Strength, Ultimate | 57.4 MPa | 8330 psi | ASTM D638 |
Elongation at Break | 0.82 % | 0.82 % | ASTM D638 |
Tensile Modulus | 9.54 GPa | 1380 ksi | ASTM D638 |
Flexural Yield Strength | 89.8 MPa | 13000 psi | ASTM D790 |
Flexural Modulus | 8.44 GPa | 1220 ksi | ASTM D790 |
Compressive Yield Strength | 192.1 MPa | 27860 psi | ASTM D695 |
Charpy Impact, Notched | 0.170 J/cm² | 0.809 ft-lb/in² | ASTM D256 |
Impact | 94 | 94 | J/m Plenco drop ball test |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 201 °C | 394 °F | Heat resistance per ASTM D794 |
Deflection Temperature at 1.8 MPa (264 psi) | 174 °C | 345 °F | ASTM D648 |
Flammability, UL94 | V-1 @Thickness 1.47 mm |
V-1 @Thickness 0.0579 in |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Electrical Resistivity | 2.12e+11 ohm-cm | 2.12e+11 ohm-cm | ASTM D257 |
Dielectric Constant | 5.2 @Frequency 1e+6 Hz |
5.2 @Frequency 1e+6 Hz |
ASTM D150 |
Dielectric Strength | 7.40 kV/mm | 188 kV/in | Step by Step; ASTM D149 |
10.9 kV/mm | 277 kV/in | Short Time; ASTM D149 | |
Dissipation Factor | 0.066 @Frequency 1e+6 Hz |
0.066 @Frequency 1e+6 Hz |
ASTM D150 |
Arc Resistance | 160 sec | 160 sec | ASTM D495 |
Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |