- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE D 5302 NAT
Multibase Multi-Flex® TPE D 5302 NAT
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE D 5302 NAT.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
The moisture content is 0.912%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Linear Mold Shrinkage | 0.0126 cm/cm | 0.0126 in/in | ASTM D955 |
| Melt Flow | 2.6 g/10 min | 2.6 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 51.1 | 51.1 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 18.6 MPa | 2700 psi | ASTM D412 |
| Elongation at Break | 156 % | 156 % | ASTM D412 |
| Flexural Modulus | 0.578 GPa | 83.8 ksi | method 1, Proc.B; ASTM D-790 |
| Tear Strength | 112 kN/m | 639 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Plastcom SLOVAMID® 6 GF 20 FRA 5 PA6 reinforced with glass fiber, flame retarded
- RheTech Products T20P104-01 20% Talc Reinforced Polypropylene, Black
- Chevron Phillips KN 226B LDPE Injection Molding Resin (discontinued **)
- KaMin KaMin® HG Kaolin Clay - Waterwashed
- Formosa Plastics Formolene® L42009PE Film (Butene Grade) LLDPE
- DSM Stanyl® OCD2300 BLK PA46-GF50
- Axiall 13870 Wire & Cable Flexible PVC
- 3M 93015LE High Strength Double Coated Tape with Adhesive 300LSE
- Arlon R35928R015 0.0155" (0.394 mm) Uncured/Cured Silicone Rubber with Fiberglass Substrate
- DSM Akulon® F130-B Nylon 6 (European Grade) (Dry) (discontinued **)
Copyright © lookpolymers.com All Rights Reserved