Master Bond Mastersil 415 One Component Room Temperature Curing, Transparent Silicon

Category	Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade
Manufacturer	Master Bond Inc.
Trade Name	Mastersil
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Master Bond Mastersil 415 One Component Room Temperature Curing, Transparent Silicon.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Master Bond MasterSil 415 is a ready-to-use, one component high performance silicone elastomer compound for bonding, sealing and protective coatings featuring high transparency. It has a paste consistency and will not sag, slump or run off surfaces. It cures at ambient temperatures to a flexible rubbery solid when exposed to atmospheric moisture.

Mechanical Properties	Metric	English
Hardness, Shore A	30	30
Tensile Strength, Yield	2.24 MPa	325 psi
Elongation at Yield	375 %	375 %

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	204 °C	400 °F
Minimum Service Temperature, Air	-121 °C	-185 °F

Optical Properties	Metric	English	Comments
Transmission, Visible	90 %	90 %	transparent; thickness not quantified

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm

Processing Properties	Metric	English	Comments
Cure Time	720 - 1440 min @Temperature 23.0 °C	12.0 - 24.0 hour @Temperature 73.4 °F

Descriptive Properties	Value	Comments
Color	Transparent
Set-Up Time, minutes	8-12	At Room Temperature
Viscosity	Paste

Users viewing this material also viewed the following: