- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Sheet/Thermoforming Grade
- Mapal Plastics Maplon Type 3G Polypropylene Sheet
Mapal Plastics Maplon Type 3G Polypropylene Sheet
| Category | Polymer , Film , Thermoplastic , Polypropylene (PP) , Polypropylene, Sheet/Thermoforming Grade |
| Manufacturer | Mapal Plastics |
| Trade Name | Maplon |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Mapal Plastics Maplon Type 3G Polypropylene Sheet.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Maplon type “3G†is a single layer highly polished clear sheets, with anti-blocking properties.Main advantages: High clarity and low haze, Easy to convert due to reduced blocking, High durability, Water and chemical resistance, High heat resistance, Unlimited flex life of integral hinge, Suitable to offset printing with UV or Oxidation inks and can use when food contact neededMain disadvantages: Low scratch resistance
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.900 g/cc | 0.900 g/cc | |
| Thickness | 500 microns | 19.7 mil | |
| Surface Tension | >= 48 dynes/cm | >= 48 dynes/cm | After 2 months from production |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Film Tensile Strength at Yield, MD | 30.0 MPa @Temperature 23.0 °C |
4350 psi @Temperature 73.4 °F |
ASTM D638 |
| Film Tensile Strength at Yield, TD | 29.0 MPa @Temperature 23.0 °C |
4210 psi @Temperature 73.4 °F |
ASTM D638 |
| Film Elongation at Break, MD | >= 600 % @Temperature 23.0 °C |
>= 600 % @Temperature 73.4 °F |
ASTM D638 |
| Film Elongation at Break, TD | >= 600 % @Temperature 23.0 °C |
>= 600 % @Temperature 73.4 °F |
ASTM D638 |
| Film Elongation at Yield, MD | 24 % @Temperature 23.0 °C |
24 % @Temperature 73.4 °F |
ASTM D638 |
| Film Elongation at Yield, TD | 23 % @Temperature 23.0 °C |
23 % @Temperature 73.4 °F |
ASTM D638 |
| Modulus of Elasticity | 0.280 GPa @Temperature 23.0 °C |
40.6 ksi @Temperature 73.4 °F |
MD/TD; ASTM D638 |
| Tear Strength | <= 130 kN/m | <= 742 pli | Mapal internal |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 136 °C | 277 °F | ASTM D1525 |
| Heat Distortion Temperature | 79.0 °C | 174 °F | ASTM D648 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Haze | <= 11 % | <= 11 % | Values are on 500µ thick sheets |
| Gloss | >= 110 % | >= 110 % | 60°; ASTM D523 |
| Transmission, Visible | >= 98 % | >= 98 % | Depends on thickness |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Transparent, slightly yellow in bulk |
Users viewing this material also viewed the following:
- Pyrotek ISOMAG® 70 Structural Insulation
- Huntsman PE1037 Film Extrusion Polyethylene (discontinued **)
- Ravago Manufacturing Americas Hylex® P1010G20FRMA Polycarbonate, 20% Glass Filled
- LyondellBasell Alathon® M4855 High Density Polyethylene, Injection Molding Grade
- H.C. Starck Grade M11 I.o. Silicon Nitride, Si3N4
- Dow Tyrin® CM0136 Chlorinated Polyethylene Elastomer
- Dow Corning XIAMETER® PMCPPMX-200 1000CS Silicone Fluid
- Cheng Yu Plastic FV30710 POM, 10% Mineral Reinforced
- 3M Scotch-Weld™ RT38 Retaining Compound Anaerobic Adhesives
- SABIC Innovative Plastics LNP Verton WV00A PBT (Europe-Africa-Middle East)
Copyright © lookpolymers.com All Rights Reserved