- HOME
- POLYMER SEARCH
- Solvent
- LyondellBasell PNB Propylene glycol normal butyl ether
LyondellBasell PNB Propylene glycol normal butyl ether
| Category | Fluid , Solvent |
| Manufacturer | LyondellBasell |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LyondellBasell PNB Propylene glycol normal butyl ether.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by Lyondell.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.880 g/cc | 0.880 g/cc | 20/20°C |
| Density | 0.875 g/cc @Temperature 20.0 °C |
0.0316 lb/in³ @Temperature 68.0 °F |
|
| Solubility in Water | 6.0 % | 6.0 % | 20°C |
| Viscosity | 3.5 cP @Temperature 25.0 °C |
3.5 cP @Temperature 77.0 °F |
|
| Molecular Weight | 132.2 g/mol | 132.2 g/mol | |
| Vapor Pressure | 0.000827 bar @Temperature 20.0 °C |
0.620 torr @Temperature 68.0 °F |
|
| Evaporation Loss | 7.0 % | 7.0 % | n-BuAc=100% |
| Surface Tension | 26 dynes/cm | 26 dynes/cm | 25°C |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Boiling Point | 170 °C | 338 °F | at 760 mmHg |
| Flash Point | 62.0 °C | 144 °F | Abel Closed Cup |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.416 @Temperature 25.0 °C |
1.416 @Temperature 77.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| CAS Number | 5131-66-8 |
Users viewing this material also viewed the following:
- MV Labs CA460 CaCl2 Calcium chloride, anhydrous
- Plastcom SLOVAMID 6 GF 65/1M PA6 reinforced with 65% glass fibre
- Polyplastic TechnoTep B® 65 A Thermoplastic Elastomer, Mineral Filled
- Haynes Hastelloy® W alloy, gas tungsten arc welds, aged 1000 hours at 650°C (1200°F)
- LATI Latilon 28D-V0 PC, Flame Retardant
- Sumitomo Bakelite North America Epiall® 2061B-1 Mineral and Glass Filled Electrical Encapsulation Grade Epoxy
- Teknor Apex Sinvicomp DBS 8613 Polyvinyl Chloride, Rigid
- Diamond Polymers ABS TS-12 Injection Molding Grade, Medium Heat
- Adell BW-17 Nylon 6, 35% Glass Reinforced; Superior Finish
Copyright © lookpolymers.com All Rights Reserved