- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane, Elastomer, Ether Grade
- Lubrizol ESTANE® 58202 Ether Based Thermoplastic Polyurethane
Lubrizol ESTANE® 58202 Ether Based Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade |
| Manufacturer | Lubrizol (former Noveon) |
| Trade Name | ESTANE® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lubrizol ESTANE® 58202 Ether Based Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Halogenated flame retardant compound with good low temperature properties and cut resistanceUses: Extrusion – wire and cable jacketing and general extrusion where flame retardant propertied are required.Available in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.25 g/cc | 1.25 g/cc | ASTM D792 |
| Loss On Ignition | 32 % | 32 % | ASTM D2863 |
| Maximum Moisture Content | 0.020 | 0.020 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 82 - 88 @Time 5.00 sec |
82 - 88 @Time 0.00139 hour |
ASTM D2240 |
| Tensile Strength | 27.6 MPa | 4000 psi | ASTM D412 |
| Elongation at Break | 650 % | 650 % | ASTM D412/D638 |
| 100% Modulus | 0.00550 GPa | 0.798 ksi | ASTM D412 |
| 300% Modulus | 0.00190 GPa | 0.276 ksi | ASTM D412 |
| Tear Strength | 18.4 kN/m | 105 pli | Trouser; ASTM D470 |
| Graves Tear Strength | 63.1 kN/m | 360 pli | Die C; ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 155 | 155 | H-18, 1000g; ASTM D3389 B |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 115 °C | 239 °F | DSC |
| Glass Transition Temp, Tg | -45.0 °C | -49.0 °F | DSC |
| Flammability Test | 5.0 | 5.0 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Zone 1 | 174 °C | 345 °F | Extrusion |
| Zone 2 | 179 °C | 354 °F | Extrusion |
| Zone 3 | 185 °C | 365 °F | Extrusion |
| Zone 4 | 188 °C | 370 °F | Extrusion |
| Adapter Temperature | 188 °C | 370 °F | 5, Extrusion |
| Die Temperature | 188 °C | 370 °F | Zone 1, 6, Extrusion |
| 188 °C | 370 °F | Zone 2, Extrusion | |
| Drying Temperature | 104 °C | 219 °F | |
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | |
| Dew Point | -40.0 °C | -40.0 °F |
Users viewing this material also viewed the following:
- Multibase Multi-Flex® TPE D 4112 BLK
- Premix Thermoplastics PRESEAL® TPE 5010
- Quadrant EPP Duratron® PAI T4501 PAI + graphite + PTFE, compression moulded (ISO Data)
- Polimeri Europa Eraclene® PF 92 High Density Polyethylene - Pipe Grade Resin
- Kennametal Stellite Deloro® 716 PM with P/M Processing
- LG Chemical LUTENE-H ME6000 HDPE
- ExxonMobil Mobil Clean 5W-30 Motor Oil
- DuPont Teijin Films Melinex® 561 Polyester Film
- Eurotec® Tecodur® PB70 BR20 NL100 HS PBT, 20% glass fiber reinforced, heat stabilized, natural
- Eastman Tenite Acetate 109E3V36324 Clear, Trsp Cellulose Acetate (discontinued **)
Copyright © lookpolymers.com All Rights Reserved