LNP Thermocomp® UF-1009 HS Polyphthalamide, Glass Fiber Reinforcement (discontinued **)

Category	Polymer , Thermoplastic , Polyphthalamide (PPA)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	LNP Thermocomp® UF-1009 HS Polyphthalamide, Glass Fiber Reinforcement (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Forms: PelletsProcessing Method: Injection MoldingInformation provided by LNP, a GE Plastics Company.This data sheet is labeled Discontinued; however many LNP grades are still active under new names instituted after the SABIC purchase.

Physical Properties	Metric	English	Comments
Specific Gravity	1.64 g/cc	1.64 g/cc	Method A; ASTM D792
Water Absorption	0.20 %	0.20 %	at 24 hrs; ASTM D570
Linear Mold Shrinkage	0.0020 cm/cm	0.0020 in/in	ASTM D955
Linear Mold Shrinkage, Transverse	0.0050 cm/cm	0.0050 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	242 MPa	35100 psi	ASTM D638
Tensile Strength, Yield	242 MPa	35100 psi	ASTM D638
Elongation at Break	1.7 %	1.7 %	ASTM D638
Elongation at Yield	1.7 %	1.7 %	ASTM D638
Tensile Modulus	20.4 GPa	2960 ksi	ASTM D638
Flexural Strength	386 MPa	56000 psi	ASTM D790
Flexural Modulus	18.8 GPa	2730 ksi	ASTM D790
Izod Impact, Notched	1.71 J/cm @Thickness 3.18 mm	3.20 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Unnotched	13.5 J/cm @Thickness 3.18 mm	25.3 ft-lb/in @Thickness 0.125 in	ASTM D256
Izod Impact, Notched (ISO)	14.8 kJ/m²	7.04 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	82.9 kJ/m²	39.4 ft-lb/in²	ISO 180
Falling Dart Impact	15.6 J	11.5 ft-lb	ASTM D3763
Impact Test	4.37 J	3.22 ft-lb	Multi-Axial Instrumented Impact Energy; ISO 6603-2

Thermal Properties	Metric	English	Comments
Deflection Temperature at 1.8 MPa (264 psi)	258 °C	496 °F	Unannealed; ASTM D648

Processing Properties	Metric	English	Comments
Melt Temperature	316 - 329 °C	601 - 624 °F
Mold Temperature	135 - 163 °C	275 - 325 °F
Drying Temperature	121 - 149 °C	250 - 300 °F
Dry Time	4 hour	4 hour
Moisture Content	0.15 %	0.15 %	Suggested
Back Pressure	0.172 - 0.345 MPa	24.9 - 50.0 psi

Users viewing this material also viewed the following: