- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Kraton® D1117 P (SIS) Linear Block Copolymer
Kraton® D1117 P (SIS) Linear Block Copolymer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1117 P (SIS) Linear Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description:Kraton D1117 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 17%. It is supplied from North America in the physical form identified: Kraton D1117 PT - supplied as a dusted dense pelletRegion: Asia Pacific, Europe, Japan, North America, and South America Uses: Kraton D1117 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.Applications: Adhesives, Sealant and Coatings; Compounding and Personal Hygiene; Impact Modification; Footwear; and Bitumen Modification
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.920 g/cc | 0.920 g/cc | ASTM D4025 |
| Volatiles | <= 0.50 % | <= 0.50 % | KM 04 |
| Brookfield Viscosity | 500 cP @Temperature 25.0 °C |
500 cP @Temperature 77.0 °F |
25% Toluene solution; BAM 922 |
| Melt Flow | 29 g/10 min @Load 5.00 kg, Temperature 200 °C |
29 g/10 min @Load 10.8 lb, Temperature 392 °F |
|
| Ash | 0.30 - 0.40 % | 0.30 - 0.40 % | KM 05 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 33 | 33 | 10 seconds. Typical values on polymer compression molded at 150°C (300°F).; ASTM D2240 |
| Tensile Strength, Ultimate | 8.27 MPa | 1200 psi | Typical properties based on film cast from toluene solution.; ASTM D412 |
| Elongation at Break | 1300 % | 1300 % | Typical properties based on film cast from toluene solution.; ASTM D412 |
| 300% Modulus | 0.000414 GPa | 0.0600 ksi | Typical properties based on film cast from toluene solution.; ASTM D412 |
| Chemical Properties | Metric | English | Comments |
|---|---|---|---|
| Diblock Content | 33 % | 33 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | 0.08-0.3%, KM 08 |
| Polystyrene | 15.6-19.2%, KM 03 | |
| Total Extractables | <1.0%, KM 05 | |
| Styrene/Rubber Ratio | 17/83 |
Users viewing this material also viewed the following:
- Polikim POLITAL® Polyoxymethylene (POM)
- Osprey Metals 440C Stainless Steel Powder (Grade 90% - 16)
- PolyOne Nymax™ GF 1200 A 40 IM Black 13A Polyamide 66 (Nylon 66)
- Kazanorgsintez Oleox-5
- Industrial Laminates/Norplex NP602 Paper Base Laminate
- HP Alloys Alloy B-2, Solution Treated, 20% Cold Worked
- Sylvin Technologies 8925-90 Natural PVC Extrusion Compound
- Dow Corning XIAMETER® PMCPPMX-200 60,000CS Silicone Fluid
- A. Schulman ComAlloy Comtuf® 602 Nylon 6/6, High Impact Modified
Copyright © lookpolymers.com All Rights Reserved