- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast FLUCON 150 Dense Self Flowing Refractory Castable
Gouda Vuurvast FLUCON 150 Dense Self Flowing Refractory Castable
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | FLUCON |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast FLUCON 150 Dense Self Flowing Refractory Castable.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Flucon 150 is a self-flowing low cement castable based on sintered bauxite.Remarks: These values apply to cast products.Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.80 - 2.90 g/cc | 0.101 - 0.105 lb/in³ | After drying at 110°C |
| Particle Size | <= 4000 µm | <= 4000 µm | Grain Size |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 65.0 - 75.0 MPa @Temperature 100 °C |
9430 - 10900 psi @Temperature 212 °F |
Cold Crushing Strength |
| 80.0 - 100 MPa @Temperature 1000 °C |
11600 - 14500 psi @Temperature 1830 °F |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 1.77 - 1.97 W/m-K @Temperature 100 °C |
12.3 - 13.7 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 1.77 - 1.97 W/m-K @Temperature 600 °C |
12.3 - 13.7 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 1.82 - 2.02 W/m-K @Temperature 1000 °C |
12.6 - 14.0 BTU-in/hr-ft²-°F @Temperature 1830 °F |
||
| Maximum Service Temperature, Air | 1500 °C | 2730 °F | |
| Shrinkage | -0.300 - 0.300 % @Temperature 1000 °C |
-0.300 - 0.300 % @Temperature 1830 °F |
Permanent Linear Change |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 82 % | 82 % | |
| Fe2O3 | 1.3 % | 1.3 % | |
| SiO2 | 13 % | 13 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Material Consumption per 1 m3 | 2800 kg | |
| Mixing Water | 5.5-6 liters | per 100 kgs dry material |
Users viewing this material also viewed the following:
- M. Holland Company EV200 EVA (discontinued **)
- Kennametal Stellite Stellite® 6K 1.6 mm thick sheet
- Henkel Hysol EA 9258.1 Primer
- Teknor Apex Monprene® MP 1527 Thermoplastic Elastomer
- Tipco Tipcolene® UV 1022 - Polymeric-HALS (20% UV Stabilizer) Masterbatch in Polypropylene Homopolymer
- Eastman Tritan MX730 Copolyester
- Covestro Texin® 390 Urethane Thermoplastic Elastomer
- Adamas Adalon® 817 PTFE, 60% Bronze
- Axiall 7900 Moldings & Extrusions Flexible PVC
Copyright © lookpolymers.com All Rights Reserved