- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- Gouda Vuurvast CURON 130 HRCC RAPID Dense Refractory Castable
Gouda Vuurvast CURON 130 HRCC RAPID Dense Refractory Castable
| Category | Ceramic , Oxide , Aluminum Oxide , Silicon Oxide |
| Manufacturer | Gouda Vuurvast |
| Trade Name | CURON |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Gouda Vuurvast CURON 130 HRCC RAPID Dense Refractory Castable.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: An extra coarse, low iron castable for use to 1300°C under normal operation conditions, also usable under reducing circumstances. Curon 130 HRCC RAPID has good thermal shock resistance because of its low thermal expansion and allows a relatively high heating rate because of special additives.Remarks: These values apply to cast products.Information provided by Gouda Vuurvast.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 2.05 - 2.15 g/cc | 0.0741 - 0.0777 lb/in³ | After drying at 110°C |
| Particle Size | <= 12000 µm | <= 12000 µm | Grain Size |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Compressive Strength | 30.0 - 40.0 MPa @Temperature 1000 °C |
4350 - 5800 psi @Temperature 1830 °F |
Cold Crushing Strength |
| 40.0 - 50.0 MPa @Temperature 100 °C |
5800 - 7250 psi @Temperature 212 °F |
Cold Crushing Strength |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.470 - 0.570 W/m-K @Temperature 100 °C |
3.26 - 3.96 BTU-in/hr-ft²-°F @Temperature 212 °F |
|
| 0.510 - 0.610 W/m-K @Temperature 600 °C |
3.54 - 4.23 BTU-in/hr-ft²-°F @Temperature 1110 °F |
||
| 0.550 - 0.650 W/m-K @Temperature 1000 °C |
3.82 - 4.51 BTU-in/hr-ft²-°F @Temperature 1830 °F |
||
| Maximum Service Temperature, Air | 1300 °C | 2370 °F | |
| Shrinkage | -0.300 - 0.100 % @Temperature 1000 °C |
-0.300 - 0.100 % @Temperature 1830 °F |
Permanent Linear Change |
| Component Elements Properties | Metric | English | Comments |
|---|---|---|---|
| Al2O3 | 38 % | 38 % | |
| SiO2 | 49 % | 49 % |
| Descriptive Properties | Value | Comments |
|---|---|---|
| ASTM Classification | B | |
| Material Consumption per 1 m3 | 2050 kg | |
| Mixing Water | 12-15 liters | per 100 kgs dry material |
Users viewing this material also viewed the following:
- Nye Lubricants 623B (SO) Synthetic Oil
- Lanxess Durethan® AKV 30 G H2.0 SR1 900051 Nylon 66, 30% Glass Fiber
- UBE UBEPOL BR130B Non-Oil Extended Synthetic Rubber Vulcanizate (Cured 35 Minutes at 145°C)
- Teknor Apex Uniprene® UN-1069E2 Thermoplastic Vulcanizate
- Engineered Syntactic Systems BZ-24 Deep Water Syntactic Foam
- Crucible Steel CPM® 154 Tool Steel
- 3M 7742 Polyester Overlaminating Film
- Haynes 25 alloy, room temperature after 15% cold reduction, 1175°C anneal for 5 minutes
- STAR Thermoplastic Alloys & Rubbers StarFlex® P 7330-1000 TPE
Copyright © lookpolymers.com All Rights Reserved