EVALCA EVAL® EF-F Ethylene Vinyl Alcohol Copolymer Film (discontinued **)

Category	Polymer , Film , Thermoplastic , Ethylene Vinyl Alcohol (EVOH)
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EVALCA EVAL® EF-F Ethylene Vinyl Alcohol Copolymer Film (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

32 mol % Ethylene. Non oriented type film; property values for 15 µm film.Data provided by EVALCA. Applications: EVOH is used in packaging applications because of its outstanding gas barrier properties.EVAL™ is now produced as a part of the Kuraray product line.

Physical Properties	Metric	English	Comments
Moisture Absorption at Equilibrium	3.9 %	3.9 %	Equilibrium at 65% RH
	3.9 %	3.9 %	65% RH
Water Absorption at Saturation	8.5 %	8.5 %	100% RH
Moisture Vapor Transmission	1.50 cc-mm/m²-24hr-atm	3.81 cc-mil/100 in²-24hr-atm	40°C, 90% RH
Oxygen Transmission	0.00800 cc-mm/m²-24hr-atm	0.0203 cc-mil/100 in²-24hr-atm	20°C; 65% RH; Permeability increases significantly at higher moisture content.
Thickness	15.2 microns	0.600 mil

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	180 %	180 %	10%/min.; ASTM D638
Film Elongation at Break, TD	140 %	140 %	10%/min.; ASTM D638
Secant Modulus, MD	2.00 GPa	290 ksi	Youngs Modulus, ASTM D638, 10%/min.
Secant Modulus, TD	1.90 GPa	276 ksi	Youngs Modulus, ASTM D638, 10%/min.
Elmendorf Tear Strength MD	380 g	380 g	ASTM D638
Elmendorf Tear Strength TD	300 g	300 g	ASTM D638
Elmendorf Tear Strength, MD	24.9 g/micron	633 g/mil	0.6 mil; ASTM D638
Elmendorf Tear Strength, TD	19.7 g/micron	500 g/mil	0.6 mil; ASTM D638
Film Tensile Strength at Break, MD	80.0 MPa	11600 psi	10%/min.; ASTM D638
Film Tensile Strength at Break, TD	52.0 MPa	7540 psi	10%/min.; ASTM D638

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature 20.0 °C	27.8 µin/in-°F @Temperature 68.0 °F	Estimated by MatWeb from similar grades
	110 µm/m-°C @Temperature 100 °C	61.1 µin/in-°F @Temperature 212 °F	Estimated by MatWeb from similar grades
Specific Heat Capacity	2.40 J/g-°C	0.574 BTU/lb-°F	Estimated by MatWeb from similar grades
Thermal Conductivity	0.340 W/m-K	2.36 BTU-in/hr-ft²-°F	For EVAL F101
Melting Point	181 °C	358 °F	DSC

Optical Properties	Metric	English	Comments
Haze	1.5 %	1.5 %	65% RH
Gloss	90 %	90 %	65% RH

Electrical Properties	Metric	English	Comments
Electrical Resistivity	4.70e+12 ohm-cm	4.70e+12 ohm-cm
Surface Resistance	1.90e+15 ohm	1.90e+15 ohm
Dielectric Constant	5.5	5.5	Frequency Not Specified
Dissipation Factor	0.21	0.21	Frequency Not Specified

Users viewing this material also viewed the following: