- HOME
- POLYMER SEARCH
- Ceramic
- Cotronics Resbond™ 918 High Temperature Ceramic Adhesive, One Composition
Cotronics Resbond™ 918 High Temperature Ceramic Adhesive, One Composition
| Category | Ceramic |
| Manufacturer | Cotronics |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Cotronics Resbond™ 918 High Temperature Ceramic Adhesive, One Composition.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Flexural Strength | 4.14 MPa | 600 psi | |
| Compressive Strength | 24.1 MPa | 3500 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 10.8 µm/m-°C @Temperature 20.0 °C |
6.00 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 1.15 W/m-K | 8.00 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 1370 °C | 2500 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+8 ohm-cm | 1.00e+8 ohm-cm | |
| Dielectric Strength | 3.94 kV/mm | 100 kV/in |
Users viewing this material also viewed the following:
- Entec Hypel® PEHD8/.955 HDPE (discontinued **)
- A. Schulman POLYFORT™ FPP 1236-2939 Fiberglass Reinforced Homopolymer Polypropylene
- Chase Plastics CP Pryme® N340MGL (DAM) Nylon 6 (Utility Grade), 40% Mineral/Glass Fiber Reinforced, Internally Lubricated
- Total Polystyrene Impact 6540 Easy Flow Impact Polystyrene
- Elgiloy® Co-Cr-Ni Alloy, Strip
- Crucible Steel CPM® 1V® High Alloy Tool Steel
- COI Ceramics Sylramic™ Crystalline Silicon Carbide (SiC) Fiber
- 3M Scotch-Weld™ CA50 Gel Instant Adhesive
- A. Schulman ComAlloy Hiloy® 413 Polyester - PBT, Glass Reinforced
Copyright © lookpolymers.com All Rights Reserved