- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Injection Molded
- Chevron Phillips Marlex® HMN 5580 Polyethylene, Injection Molding Grade, HDPE (discontinued **)
Chevron Phillips Marlex® HMN 5580 Polyethylene, Injection Molding Grade, HDPE (discontinued **)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Chevron Phillips Marlex® HMN 5580 Polyethylene, Injection Molding Grade, HDPE
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Meets FDA Regulation 177.1520. High stiffness, excellent surface appearance, good impact strength and warpage resistance.Data provided by the manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.953 g/cc | 0.0344 lb/in³ | ASTM D1505 |
| Melt Flow | 8.0 g/10 min | 8.0 g/10 min | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 28.0 MPa | 4060 psi | ASTM D638 |
| Elongation at Break | >= 400 % | >= 400 % | ASTM D638 |
| Flexural Modulus | 1.41 GPa | 205 ksi | ASTM D790 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 2.33 @Frequency 100000 Hz |
2.33 @Frequency 100000 Hz |
ASTM D1531 |
| Dielectric Strength | 20.0 kV/mm @Thickness 3.17 mm |
508 kV/in @Thickness 0.125 in |
ASTM D149 |
| Dissipation Factor | >= 0.00010 @Frequency 100000 Hz |
>= 0.00010 @Frequency 100000 Hz |
ASTM D1531 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 218 - 274 °C | 424 - 525 °F | Stock Temperature |
Users viewing this material also viewed the following:
- Multibase Multi-Pro® 7011 C Natural 70% Filler Content Polypropylene
- PEAK Werkstoff DISPAL S693 Aluminum Alloy, AlCu5Ti, Condition T6
- BASF Capron® SEG3 H1 15% Glass-Filled Nylon 6 (Dry) (discontinued **)
- Michelman® FiberMax® 105B Strength enhancing fiber treatment
- Latrobe Lescalloy® 16NCD13 VAC-ARC High Strength Alloy Steel
- Teknor Apex Telcar® TL-6800-64 Thermoplastic Elastomer
- A. Schulman SCHULAMID® 66 GF50 50% Glass Fiber Reinforced 66
- ExxonMobil LDPE LD 362ON Low Density Polyethylene Resin
- ExxonMobil LLDPE LL 6301RQ Wire & Cable Linear Low Density Polyethylene Resin (European Grade)
Copyright © lookpolymers.com All Rights Reserved