Braskem TX9003 LDPE Blown Film Extrusion Polyethylene

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Film Grade
Manufacturer	Braskem
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Braskem TX9003 LDPE Blown Film Extrusion Polyethylene.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

TX9003 is a low-density polyethylene (LDPE) that presents excellent mechanical resistance, good optical properties, and high stiffness. These characteristics provide, in some applications, down gauging and excellent impression quality. This product is identified as PE 125 according to ASTM D 4976-04a standard specification. It does not contain additives. Its applications include: technical shrink-wrap films with transparent and high superficial gloss; and monolayer and multi-layer technical films for packages that need gloss associated with mechanical resistance and greater stiffness.

Physical Properties	Metric	English	Comments
Density	0.929 g/cc	0.0336 lb/in³	ASTM-D792
Melt Flow	0.30 g/10 min @Load 2.16 kg, Temperature 190 °C	0.30 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM-D1238

Mechanical Properties	Metric	English	Comments
Film Elongation at Break, MD	370 %	370 %	ASTM-D882
Film Elongation at Break, TD	700 %	700 %	ASTM-D882
Secant Modulus, MD	0.170 GPa	24.7 ksi	2% Secant Modulus; ASTM-D882
Secant Modulus, TD	0.180 GPa	26.1 ksi	2% Secant Modulus; ASTM-D882
Elmendorf Tear Strength MD	210 g	210 g	ASTM-D1922
Elmendorf Tear Strength TD	260 g	260 g	ASTM-D1922
Elmendorf Tear Strength, MD	4.20 g/micron	107 g/mil	ASTM-D1922
Elmendorf Tear Strength, TD	5.20 g/micron	132 g/mil	ASTM-D1922
Dart Drop	2.40 g/micron	61.0 g/mil	ASTM-D1709
Dart Drop Test	120 g	0.265 lb	ASTM-D1709
Film Tensile Strength at Break, MD	25.0 MPa	3630 psi	ASTM-D882
Film Tensile Strength at Break, TD	24.0 MPa	3480 psi	ASTM-D882

Optical Properties	Metric	English	Comments
Haze	11 %	11 %	ASTM-D1003
Gloss	53 %	53 %	Angle 45°; ASTM-D2457
	75 %	75 %	Angle 60°; ASTM-D2457
Transmission, Visible	90 %	90 %	transparent; thickness not quantified

Processing Properties	Metric	English	Comments
Die Opening	0.100 cm	0.0394 in	Blow Film Extrusion
Blow-up Ratio (BUR)	2.0 - 3.0	2.0 - 3.0	Blow Film Extrusion

Descriptive Properties	Value	Comments
Mass Temperature (°C)	180-220	Blow Film Extrusion
Temperature Profile (°C)	150-195	Blow Film Extrusion

Users viewing this material also viewed the following: