- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Blow Molding Grade
- Braskem BS 002 HDPE Blow Molding Polyethylene (discontinued **)
Braskem BS 002 HDPE Blow Molding Polyethylene (discontinued **)
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade |
| Manufacturer | |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Braskem BS 002 HDPE Blow Molding Polyethylene
(discontinued **).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Applications: Bottles for medicines, cleaning products, cosmetics, food products and surface-active agents. Information provided by Braskem
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.954 g/cc | 0.0345 lb/in³ | ASTM D1505 |
| ESCR 100% Igepal® | 22 hour @Thickness 3.00 mm, Temperature 23.0 °C |
22 hour @Thickness 0.118 in, Temperature 73.4 °F |
compression molded plaques; ASTM D1693B |
| Melt Flow | 0.29 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.29 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| High Load Melt Index | 35 g/10 min @Load 21.6 kg, Temperature 190 °C |
35 g/10 min @Load 47.6 lb, Temperature 374 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 64 | 64 | ASTM D2240 |
| Tensile Strength at Break | 33.0 MPa | 4790 psi | ASTM D638 |
| Tensile Strength, Yield | 27.0 MPa | 3920 psi | ASTM D638 |
| Flexural Modulus | 1.378 GPa | 199.9 ksi | ASTM D790 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 68.0 °C | 154 °F | ASTM D648 |
| Vicat Softening Point | 126 °C | 259 °F | ASTM D1525 |
Users viewing this material also viewed the following:
- Overview of materials for PET + PBT Unreinforced
- Idemitsu Kosan Xarec® EA 537 SPS, 30% Glass Filled
- LyondellBasell Petrothene® NA860008 Low Density Polyethylene
- Seals Eastern 5401 Nitrile Rubber
- SABIC Innovative Plastics LNP VERTON UX06451 PPA (Asia Pacific)
- Loctite® Output™ 5404 Heat Cure Silicone
- Arlon LW202R##-P0 0.020" (0.508 mm) Cured Self-Fusing Silicone Tape (Triangular, Unsupported)
- Azdel Plus C220-B01 22% Chopped Fiber Mat / PP Resin Matrix
- 3M Scotch-Weld™ LSB60 Toughened Epoxy Adhesives
- PolyOne Edgetek® ES-10GF/000 PES (Polyethersulfone), 10% Glass Reinforced, Hi-Temp (discontinued **)
Copyright © lookpolymers.com All Rights Reserved