Aremco AREMCOLOX™ 502-800 Macor® Machinable Glass Ceramic, MGC

Category	Ceramic , Glass , Glass Ceramic , Machinable Ceramic
Manufacturer	Aremco
Trade Name	AREMCOLOX™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Aremco AREMCOLOX™ 502-800 Macor® Machinable Glass Ceramic, MGC.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Recommended for temperatures to 1472°F (800°C) and peaks up to 1832°F (1000°C). Demonstrates low thermal conductivity, high strength, high electrical insulation, zero porosity, non-wetting, and coefficient of thermal expansion similar to most metals and sealing glasses. Machines to tight tolerances up to 0.0005”, surface finish of less than 20µin, and polishes to a smoothness of 0.5µin. Used for ultra high vacuum, aerospace, nuclear, wielding, fixturing, and medical applications. Readily machined and no firing required. Bars, disks, rods and plates are available fro 1/16” thick up to 12” diameter.

Physical Properties	Metric	English	Comments
Density	2.52 g/cc	0.0910 lb/in³
Porosity	0.00 %	0.00 %

Mechanical Properties	Metric	English	Comments
Hardness, Knoop	250	250	100g
Hardness, Rockwell A	48	48
Modulus of Elasticity	66.9 GPa	9700 ksi
Modulus of Rupture	0.0940 GPa	13.6 ksi
Compressive Strength	345 MPa	50000 psi
Poissons Ratio	0.29	0.29
Fracture Toughness	1.53 MPa-m½	1.39 ksi-in½
Shear Modulus	25.5 GPa	3700 ksi

Thermal Properties	Metric	English	Comments
CTE, linear	7.40 µm/m-°C @Temperature -200 - 25.0 °C	4.11 µin/in-°F @Temperature -328 - 77.0 °F
	9.30 µm/m-°C @Temperature 25.0 - 300 °C	5.17 µin/in-°F @Temperature 77.0 - 572 °F
	11.4 µm/m-°C @Temperature 25.0 - 600 °C	6.33 µin/in-°F @Temperature 77.0 - 1110 °F
	12.6 µm/m-°C @Temperature 25.0 - 800 °C	7.00 µin/in-°F @Temperature 77.0 - 1470 °F
Specific Heat Capacity	0.790 J/g-°C	0.189 BTU/lb-°F
Thermal Conductivity	1.464 W/m-K	10.16 BTU-in/hr-ft²-°F
Maximum Service Temperature, Air	800.0 °C	1472 °F	Continuous
	1000 °C	1832 °F	No Load

Component Elements Properties	Metric	English
Al2O3	16 %	16 %
B2O3	7.0 %	7.0 %
K2O	10 %	10 %
MgO	17 %	17 %
Other	4.0 %	4.0 %
SiO2	46 %	46 %

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+16 ohm-cm	>= 1.00e+16 ohm-cm	DC
Dielectric Constant	5.67 @Frequency 8.50e+9 Hz	5.67 @Frequency 8.50e+9 Hz
	6.03 @Frequency 1000 Hz	6.03 @Frequency 1000 Hz
Dielectric Strength	39.4 kV/mm @Thickness 2.54 mm	1000 kV/in @Thickness 0.100 in
Dissipation Factor	0.0047 @Frequency 1000 Hz	0.0047 @Frequency 1000 Hz
	0.0071 @Frequency 8.50e+9 Hz	0.0071 @Frequency 8.50e+9 Hz

Descriptive Properties	Value	Comments
Weight Loss mg/cm	0.01	Water; pH=7.6; 1 day; 95°C
	0.06	Water; pH=7.6; 3 days (water freshened daily); 95°C
	0.07	Water; pH=7.6; 3 days; 95°C
	0.1	2% Sodium Carbonate; pH = 10.9; 6 hrs; 95°C
	0.11	Water; pH=7.6; 6 days (water freshened daily); 95°C
	0.3	10% Sodium Bicarbonate; pH = 8.4; 24 hrs; 95°C
	0.6	0.2% Nitric Acid; pH = 2.8; 24 hrs; 95°C
	10	5% Sodium Hydroxide; pH = 13.2; 6 hrs; 95°C
	100	5% Hydrochloric Acid; pH = 0.1; 24 hrs; 95°C
	9.4	Water; pH=7.6; 7 days; 95°C

Users viewing this material also viewed the following: