POLYMER SEARCH

3M Dyneon™ TFM™ 1600 PTFE

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE
Manufacturer	3M Dyneon™
Trade Name	TFM™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	3M Dyneon™ TFM™ 1600 PTFE.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Meets ASTM D4894 Type III, Grade 2 resinMolding and ram extrusion powder with very good free flowing propertiesGood metering propertiesGood mold filling behaviorImproved particle coalescenceDenser polymer structureLower permeabilitySubstantially lower deformation under loadImproved weldabilityGood electrical and mechanical propertiesIncreased modulus of elasticityInformation provided by Dyneon, A 3M Company

Physical Properties	Metric	English	Comments
Specific Gravity	2.16 g/cc	2.16 g/cc	@ 23°C, Sintering Molding; ASTM D4894-98a
Bulk Density	0.830 g/cc	0.0300 lb/in³	ASTM D4894-98a
Particle Size	450 µm	450 µm	average; ASTM D4894-98a
Deformation	4.0 %	4.0 %	2175 psi - permanent, 23°C, Sintering Molding; ASTM D621
	8.0 %	8.0 %	2175 psi - 24 hrs, 23°C, Sintering Molding; ASTM D621
	9.0 %	9.0 %	2175 psi - 100 hrs, 23°C, Sintering Molding; ASTM D621

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	31.7 MPa	4600 psi	Sintered Molding; ASTM D4894-98a
Elongation at Break	450 %	450 %	Sintered Molding; ASTM D4894-98a
Tensile Modulus	0.6498 GPa	94.25 ksi	Sintered Molding; ASTM D638

Thermal Properties	Metric	English	Comments
Melting Point	317 - 337 °C	603 - 639 °F	second; ASTM D4894-98a
	332 - 352 °C	630 - 666 °F	initial; ASTM D4894-98a
Maximum Service Temperature, Air	260 °C	500 °F
Minimum Service Temperature, Air	-200 °C	-330 °F
Flammability, UL94	V-0	V-0
Shrinkage	3.50 % @Temperature 23.0 °C	3.50 % @Temperature 73.4 °F	Sintering Moldings; ASTM D4894-98a

Electrical Properties	Metric	English	Comments
Dielectric Strength	102.4 kV/mm	2601 kV/in	ASTM D149-95a

Users viewing this material also viewed the following: