Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | >= 4.00 kV/mm @Thickness 1.00 mm |
>= 102 kV/in @Thickness 0.0394 in |
in oil; ASTM D149 |
SABIC Innovative Plastics LNP KONDUIT OX11315 PPS (Asia Pacific) Thermally conductive electrically insulative mineral filled PPS FR compound. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | |
MarkeTech Sapphire (Aluminum Oxide - Al2O3) Single Crystal Data provided by the supplier, MarkeTech International.Sapphire is grown by several methods: Boule form (Czochralski), in plate form, or as tubes, rods and plates. Boules are grown up to 8" diam.. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | AC 60 Hz |
Fujipoly Industries Sarcon® 15GTR Thin-Film GTR Sarcon TR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GTR is a composite of .. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | 200°C for 1,000 hrs |
Fujipoly Industries Sarcon® 20GHR Thin-Film GHR Sarcon HR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GHR is a composite of .. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | 60°C for 500 hrs |
Fujipoly Industries Sarcon® 20GHR Thin-Film GHR Sarcon HR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GHR is a composite of .. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | 60°C for 500 hrs |
Fujipoly Industries Sarcon® 20GTR Thin-Film GTR Sarcon TR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GTR is a composite of .. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | 60°C for 500 hrs |
Fujipoly Industries Sarcon® 30H Thin-Film HR Sarcon HR is Fujipolys originally developed High Heat Conductive Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Sarcon GHR is a composite of .. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | 1 MHz |
Momentive Performance Materials Type 214 Fused Quartz Tubing Used for clear fused quartz lamp tubing. GE 214 is a high purity, high transmittance, high temperature material with a low hydroxyl (OH-) content. It is suitable for a broad range of mercury, halo.. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | IEC 60243 |
Solvay TECHNYL® A 246M PA66, Conditioned Description: Unreinforced and modified polyamide 66, with very high impact resistance even at low temperature, for injection molding.Available in: Europe and North AmericaProduct Applications: TECHN.. |
|||
Dielectric Strength | 4.00 kV/mm @Thickness 0.100 mm |
102 kV/in @Thickness 0.00394 in |
ASTM D149 |
Solvay Specialty Polymers Ajediumâ„¢ Films PPS Polyphenylene Sulfide (PPS) Polyphenylene sulfide, PPS, is a thermoplastic film that has excellent chemical resistance and good electrical and physical properties.Features: Flame Retardant; Good Chemical Resistance; Good Elect.. |
|||
Dielectric Strength | 4.00 kV/mm | 102 kV/in | ASTM D149 |
Tipco Tipcolite® TG 613 Phenolic Compound, Mineral & Wood Flour, Soft Flow & Good Surface Finish Soft Flow Phenolic Compound, Reinforced with Mineral & Wood FlourApplications: General PurposeProcessing: Compression MoldingInformation provided by the Manufacturer, Tipco Industries Ltd.,
India... |
|||
Dielectric Strength | >= 4.00 kV/mm @Temperature 90.0 °C |
>= 102 kV/in @Temperature 194 °F |
IS 2584-1963 |
Amity Thermosets ATM 123 Phenolic Molding Organic Filler, Compression Molded Characteristics:Glossy surface free of filler marks Surface good & free of flaws Good mouldabilitySurface free of filler marks even after turningGood mechanical strengthColor-black, brownMedium flow.. |
|||
Dielectric Strength | 4.00 - 5.50 kV/mm @Temperature 90.0 °C |
102 - 140 kV/in @Temperature 194 °F |
IS 2584-1963 |
Amity Thermosets ATO 176 Phenolic Molding Organic and inorganic Filler, Compression Molded Characteristics:Heat resistant ( asbestos free )Good electric insulationLow shrinkageLow water absorptionMedium mechanical strengthNot suitable for high mechanical tensionColor-blackMedium flow App.. |
|||
Dielectric Strength | 4.00 - 5.00 kV/mm @Temperature 90.0 °C |
102 - 127 kV/in @Temperature 194 °F |
IS 2584-1963 |
Amity Thermosets ATR 126 Phenolic Molding Organic Filler, Compression Molded Characteristics:Ammonia freeGood mouldabilityGood mechanical strengthGood electrical insulationGood surface finishMedium thermal stability Color-black, brownSoft/medium flow Applications:Telecommuni.. |