Polymer Property : Dielectric Strength = 19.7 kV/mm Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Dielectric Strength	19.7 kV/mm	500 kV/in	Short Term; ASTM D149
Quadrant EPP Ketron® GF30 PEEK, Extruded 30% Glass-Reinforced Polyetherether Ketone (ASTM Product Data Sheet)
Dielectric Strength	19.7 kV/mm	500 kV/in	Tubing; ASTM D876
Parker Chomerics CHO-SHRINK® Heat Shrink EMI Shielding Conductive Heat Shrinking Shielding. CHO-SHRINK tubing is a heat shrinkable polyolefin tubing which provides effective EMI shielding for cables, connectors and cable/connector terminations. CHO-SHRI..
Dielectric Strength	19.7 kV/mm @Thickness 3.17 mm	500 kV/in @Thickness 0.125 in
Ineos Nova PS 3190 Crystal Polystyrene (discontinued **) Information provided by Nova ChemicalsINEOS NOVA began October 1 2007 as an expansion of the 50:50 joint venture between NOVA Chemicals and INEOS to include North American assets.
Dielectric Strength	19.7 kV/mm @Thickness 3.17 mm	500 kV/in @Thickness 0.125 in
Ineos Nova 3700 General Purpose Crystal Polystyrene (discontinued **) Good balance of flow and strength, Good crack resistanceApplications: Single service wares, Blending resinExposure to gamma radiation in the 2.02-6.06 megarad range has no significant effect on the ..
Dielectric Strength	19.7 - 23.0 kV/mm	500 - 584 kV/in	Average value: 20.8 kV/mm Grade Count:3
Overview of materials for Polypropylene with 40% Calcium Carbonate (CaCO3) Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 40% Calcium Carbonate (CaCO3) Filler". Specific grades with primary filler content be..
Dielectric Strength	19.7 - 80.0 kV/mm	500 - 2030 kV/in	Average value: 33.5 kV/mm Grade Count:11
Overview of materials for Fluorinated Ethylene Propylene (FEP), Molded/Extruded This property data is a summary of similar materials in the MatWeb database for the category "Fluorinated Ethylene Propylene (FEP), Molded/Extruded". Each property range of values reported is minimu..
Dielectric Strength	19.7 - 197 kV/mm	500 - 5000 kV/in	Average value: 96.8 kV/mm Grade Count:7
Overview of materials for Fluorocarbon ETFE/ECTFE, Molded/Extruded This property data is a summary of similar materials in the MatWeb database for the category "Fluorocarbon ETFE/ECTFE, Molded/Extruded". Each property range of values reported is minimum and maximum..
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFill FRÂ® PA6 FR IM Availability: North AmericaForms: PelletsAdditive: Impact ModifierFeatures: Flame Retardant and Impact ModifiedInformation provided by TP Composites, Inc.
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6 GF15 L UV BK 15% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 15% Filler by Weight Additive: UV Stabilizer and LubricantFeatures: Good UV Resistance and LubricatedAppeara..
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6/6 GF33 LE BK 33% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 33% Filler by WeightFeatures: Low ExtractablesAppearance: BlackTPCI#7762101Information provided by TP Compos..
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PP GB20 20% Glass Beads Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 20% Filler by WeightInformation provided by TP Composites, Inc.
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PP GB50 50% Glass Beads Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 50% Filler by WeightInformation provided by TP Composites, Inc.
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES LuriblendÂ® PA6 TS15 BK Nylon 6 Availability: North AmericaForms: PelletsAdditive: Heat Stabilizer, Silicone Lubricant and PTFE LubricantFeatures: Heat Stabilized and LubricatedAppearance: BlackInformation provided by TP Composite..
Dielectric Strength	19.7 kV/mm	500 kV/in	Method A (Short-Time); ASTM D149
Techmer ES HiFillÂ® PA6/6 GF60 TL10 60% Glass Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Fiber Reinforcement, 60% Filler by WeightAdditive: Lubricant Features: Lubricated Appearance: BlackTPCI# 8575101Information provi..
Dielectric Strength	19.7 kV/mm	500 kV/in
Saint-Gobain COHRlasticÂ® 9050 Wide Series General Purpose Silicone Solid Rubber Description: COHRlasticÂ® solid silicone rubber in square sheet and continuous length form has a smooth, blemish-free surface. It is available in degrees of hardness from relatively soft 30 durome..
Dielectric Strength	>= 19.7 kV/mm	>= 500 kV/in	Compound; ASTM D149
Borealis Casico™ FR4807 Non-Halogen Flame Retardant Compound for Low Voltage Insulation and Jacketing Casico FR4807 is a natural, thermoplastic polyolefin compound designed for flame retardant low voltage wire insulation and jacketing. As such, FR4804 offers a unique combination of good extrusion pr..
Dielectric Strength	>= 19.7 kV/mm	>= 500 kV/in	Compound; ASTM D149
Borealis Casico™ FR4802 Non-Halogen Flame Retardant Insulation/Jacketing Compound Borstar FR4802 is a natural, thermoplastic polyolefin compound designed for flame retardant low voltage wire insulation and jacketing. As such, FR4802 offers a unique combination of good extrusion p..
Dielectric Strength	19.7 kV/mm	500 kV/in	ASTM D149
Ensinger Tecast™ 6PA Natural Unfilled Cast Nylon 6 (PA6) Tecast® 6PA Natural is an FDA-compliant grade used in applications requiring cast nylon but without any fillers.General Tecast® Cast Nylon Information: Tecast cast nylon, available in a variety of..
Dielectric Strength	19.7 - 23.6 kV/mm	500 - 600 kV/in	ASTM D149
Cast Nylons Nycast® 12 Cast Nylon 12 NYCAST® 12 is specially formulated and designed to offer very low moisture absorption, superior wear resistance, dimensional stability, exceptional lubrication ability, outstanding mechanical chara..
Dielectric Strength	19.7 - 23.6 kV/mm	500 - 600 kV/in	ASTM D149
Cast Nylons Nycast® RX Solid Lubricant Filled Red Cast Nylon 6 NYCAST® RX is a specially formulated, self-lubricating grade designed to deliver low coefficient of friction, superior wear resistance, high pressure/velocity performance, and low moisture absorpti..
Dielectric Strength	19.7 kV/mm	500 kV/in	ASTM D149
3M Scotchkote™ 165HB Urethane Coating 3M Scotchkote Urethane Coating 165HB is a two component 100% solids urethane coating used for the internal and external protection of steel and concrete pipes, tanks, and vessels. It can be used in ..
Dielectric Strength	19.7 - 40.0 kV/mm	500 - 1020 kV/in	Average value: 29.2 kV/mm Grade Count:13
Overview of materials for Nylon 11, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Nylon 11, Unreinforced". Each property range of values reported is minimum and maximum values of appropr..
Dielectric Strength	19.7 kV/mm	500 kV/in
Covestro Desmopan® 453 Urethane Thermoplastic Elastomer (discontinued **) Key Features:UnfilledSuitable processing methods:Injection moldingInformation provided by Bayer Polymers.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and has officially ..
Dielectric Strength	>= 19.7 kV/mm	>= 500 kV/in	At 50 mils; ASTM D3755
Borealis Borstar® HE6063 Natural Bimodal HD Polyethylene Compound for Jacketing of Communication and Power Cables Borstar HE6063 is a natural, colorable, bimodal, high-density polyethylene compound, produced using the Borstar process, for jacketing of power and telecommunications cables. It is characterized by..
Dielectric Strength	19.7 kV/mm	500 kV/in	ASTM D149
Arlon 48981R010 0.0100" Uncured Silicone Rubber with Fiberglass Substrate Design/Construction:Interleave 1: 3 mil PolyethyleneSide 1: Uncured RubberSubstrate: Style 1080 FiberglassSide 2: Uncured Silicone RubberInterleave 2: 3 mil PolyethyleneThis data represents typic..
Dielectric Strength	19.7 kV/mm @Thickness 3.17 mm	500 kV/in @Thickness 0.125 in
Ineos Nova 1204 High Heat Crystal Polystyrene Good processing characteristics, High tensile strength and modulus, Excellent clarity, USP Class VIApplications: Direct injection foam, Biaxially oriented sheet, Glazing sheetExposure to gamma radia..