Electrical Properties | Metric | English | Comments |
---|---|---|---|
Dielectric Strength | 13.7 kV/mm | 348 kV/in | |
Momentive Performance Materials FRV1106 Red Fluorosilicone Adhesive Sealant, Fuel Resistant Paste One-part acetoxy cure. Alkoxy cure silicones are neutral cure materials that offer exceptional adhesion and are non-corrosive to most metals. Typical uses: For use in contact with fuel, solvents, .. |
|||
Dielectric Strength | 13.7 kV/mm | 348 kV/in | |
Momentive Performance Materials FRV1107 Gray Adhesive Sealant, Fuel Resistant Paste One-part acetoxy cure. Typical uses: For use in contact with fuel, solvents, and chemicals.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materi.. |
|||
Dielectric Strength | 13.7 kV/mm | 348 kV/in | Short Time; ASTM D149 |
Plenco 2369 Phenolic, Granular, Compression Molded PLENCO 02369 is a general purpose, organic filled phenolic molding compound, formulated to minimize the generation of free ammonia for applications that are sensitive to such formation. PLENCO 02369.. |
|||
Dielectric Strength | 13.7 kV/mm @Thickness 0.965 mm |
347 kV/in @Thickness 0.0380 in |
|
3M Scotch-Weld™ 2214 Hi-Temp Epoxy Adhesive 3M™ Scotch-Weld™ Adhesive 2214 Hi-Temp is an aluminum filled, deaerated products fro use where higher strengths are required between 82-177°C. One part 250°F (121°C) curing 100% solids, 3M™ Sc.. |
|||
Dielectric Strength | 13.7 - 15.6 kV/mm | 347 - 397 kV/in | short time |
Bulk Molding Compounds BMC HT12-1026 Unsaturated Polyester Bulk Molding Compound BMC HT12-1026 is a highly engineered Unsaturated Polyester Bulk Molding Compound developed for automotive under-hood applications. This compound is specified by Ford motor company for solenoid caps.. |
|||
Dielectric Strength | 13.7 - 15.6 kV/mm | 347 - 397 kV/in | short time |
Bulk Molding Compounds BMC HT12-1023L Unsaturated Polyester Bulk Molding Compound BMC HT12-1023L is a highly engineered Unsaturated Polyester Bulk Molding Compound developed for automotive under-hood applications. This compound is specified by Ford motor company for solenoid cap.. |
|||
Dielectric Strength | 13.7 kV/mm | 348 kV/in | short time, dry; ASTM D149 |
Vyncolit INSUL-PLATE™ X-28057-2HT Hole-Fill Powder For Printed Circuit Boards Vyncolit INSUL-PLATE™ Hole-Fill material delivers true reliability and superior performance. This material, in powder form, is specifically suited for Hole-Fill use in glass epoxy, multi-layer and .. |
|||
Dielectric Strength | 13.7 kV/mm | 348 kV/in | ST; ASTM D149 |
Sumitomo Bakelite North America FM 4009 Fiberglass Reinforced Phenolic Novolac FM 4009 is a fiberglass reinforced phenolic novolac molding compound formulated for excellent wear resistance.Information supplied by Sumitomo Bak North America. |