Polymer Property : Hot Wire Ignition, HWI = 30 sec Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® FR15 ABS (Asia Pacific) Flame retardant ABS (non-PBBE additive). Good property/toughness. Excellent moldability. UL94 V-0/5VA rated.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MG38 ABS Very high impact ABS. Toughness/rigidity. Good fatigue resistance.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MG38N ABS (Asia Pacific) Very high impact ABS. Toughness/rigidity. Good fatigue resistance. NSF Standard 61 certified in limited colors (restrictions may apply)>
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MG47 ABS (Europe-Africa-Middle East) Multi-purpose, injection molding ABS providing a favorable balance of engineering properties.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MG47N ABS (Asia Pacific) Multi-purpose, injection molding ABS providing a favorable balance of engineering properties. NSF Standard Multi-purpose, injection molding ABS providing a favorable balance of engineering properti..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycolac® MGABS01 ABS Injection molding ABS. High impact, high gloss, good flow.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® C2800 PC+ABS (Asia Pacific) Non-chlorinated and non-brominated flame retardant PC/ABS offering balanced flow and impact for various applications.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® EHA PC+ABS (Asia Pacific) PC+ABS. Electroplateable.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics GELOY CR7020 ASA ASA copolymer. Profile/sheet coextrusion over ABS. Excellent weatherability, good flow/aesthetics and high impact.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics GELOY CR7020 ASA (Asia Pacific) ASA copolymer. Profile/sheet coextrusion over ABS. Excellent weatherability, good flow/aesthetics and high impact.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® 955A PC (Asia Pacific) Lexan* 955A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated, non-brominated flame retardant PC has an UL-94 V0 rating. Lexan 955A resin is available in tran..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® LUX9610 PC (Asia Pacific) Lexan LUX9610 is a flame retardant transparent polycarbonate featuring non brominated and non chlorinated FR system with good flow and thin wall FR performance. It intended to meet WEEE/RoHS require..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® ML6411 PC Copolymer (Europe-Africa-Middle East) Lexan* ML6411 polycarbonate (PC) siloxane resin, is a high flow opaque injection molding (IM) grade with very low temperature ductility characteristics. This grade offers UL94 V0 @ 1.5mm and 5VA @ 3..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® ML6413 PC Lexan* ML6413 resin is an impact modified, flame retardant polycarbonate grade with Br- & Cl-free FR systems. It features improved light shielding capability with good flow, impact and thermal prope..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® XHT2141 PC Copolymer (Asia Pacific) XHT2141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Lexan® XHT3141 PC Copolymer (Europe-Africa-Middle East) XHT3141 is a high flow, high heat polycarbonate copolymer. It is available in a range of opaque and limited transparent colors.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® C1110 PC+ABS (Asia Pacific) High impact and ductility at 73F (23C) and -20F (-29C).
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics Cycoloy® C1110HF PC+ABS High impact and ductility at 73F and -20F. For thin-wall applications.
Hot Wire Ignition, HWI	15 - 30 sec @Thickness 3.35 mm	15 - 30 sec @Thickness 0.132 in	UL Rating PLC 3 (15-30 sec)
Ineos ABS Centrex® 401 AES Extrusion (discontinued **) Properties tested in transverse direction (worst case) on 125-mil (3.2 mm) extruded sheets specimens with
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL Rating PLC 3 (15-30 sec)
LG Chemical MI-770 MIPS
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL Rating PLC 3 (15-30 sec)
LG Chemical 92HR SAN Resin Heat and chemical resistance, Good mechanical properties, Excellent processability, Superior transparency, Good dimensional stability, Applications include automobile battery cases, water meter case..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec
LG Chemical 95HCTC SAN, High Transparency, Heat Resistance, Chemical Resistance Feature: Injection Molding, SAN, High Transparency, Heat Resistance, Chemical ResistanceApplication: Lighter, Cosmetic Container, ToothbrushCAS No. 9003-54-7Information provided by LG Chemical
Hot Wire Ignition, HWI	15 - 30 sec @Thickness >=3.00 mm	15 - 30 sec @Thickness >=0.118 in
LG Chemical LUSEP SP2300 SPS+GF30%, General Purpose Feature: Injection Molding, sPS+GF30%, General PurposeApplication: Pump Units, Pick-up Lends Holder, etc.CAS No. 9003-53-6 and 65997-17-3Information provided by LG Chemical
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics ValoxÂ® 457 PBT (Asia Pacific) 6.5% GR PBT, UL94 V-0/5V.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics XenoyÂ® 5220U PBT+PC (Asia Pacific) Unreinforced PBT+PC Alloy. Impact Modified. Improved retention of mechanical properties under UV exposure. Excellent low temperature impact and chemical resistance.
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics NORYL PX1543 PPE+PS
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL 746A
SABIC Innovative Plastics ValoxÂ® 451E PBT 20% GR. Easy flow version of VALOX 451.
Hot Wire Ignition, HWI	15 - 30 sec @Thickness 3.00 mm	15 - 30 sec @Thickness 0.118 in	UL Rating PLC 3 (15-30 sec)
Covestro Makrolon® 2407 Polycarbonate, Injection Grade Very easy flowing injection molding grade with easy mold release and UV stabilizer.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officia..
Hot Wire Ignition, HWI	15 - 30 sec @Thickness 1.50 mm	15 - 30 sec @Thickness 0.0591 in	UL Rating PLC 3 (15-30 sec)
Covestro Makrolon® 2607 Polycarbonate, Injection Grade Easy flowing injection molding grade with easy mold release and UV stabilizer.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially a..
Hot Wire Ignition, HWI	15 - 30 sec	15 - 30 sec	UL Rating PLC 3 (15-30 sec)
LG Chemical 15NFI GPPS High flow, Superior transparency and processability, good appearance, non-toxicity (Conforming to FDA CFR 177.1640), Excellent electrical properties, Heat resistance and chemical resistance, Superio..