Polymer Property : Cure Time = 0.750 hour Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Processing Properties	Metric	English	Comments
Cure Time	45.0 min @Temperature 100 °C	0.750 hour @Temperature 212 °F
Parker Chomerics CHO-BOND 584-208 Conductive Adhesive Two-component, highly conductive adhesive system that combines the good adhesive characteristics of epoxy with the superior conductivity of silver. In addition to being available in bulk form, the m..
Cure Time	45.0 min @Temperature 135 °C	0.750 hour @Temperature 275 °F
Resinlab® EP950NMF Gray Non-Metallic Filled Rubber Modified Epoxy Resinlab™ EP950NMF Gray is a non-metallic filled version of EP950G. It is a one-part rubber modified epoxy designed for bonding metal and other structural material subject to stress at elevated tem..
Cure Time	45.0 min @Temperature 100 °C	0.750 hour @Temperature 212 °F
Parker Chomerics CHO-BOND 360-20 Conductive Epoxy Low cost, electrically conductive epoxy adhesive that combines the good adhesive characteristics as epoxy, and the superior electrical conductivity of silver. It is recommended as a thermo-setting E..
Cure Time	45.0 min @Temperature 149 °C	0.750 hour @Temperature 300 °F
Master Bond Supreme 10HTS Silver Filled Electrically Conductive One Part Epoxy Master Bond Supreme 10HT/S is a one component, no mix high purity silver conductive system formulated to cure at elevated temperatures. Tensile shear strengths greater than 1,200 psi and T-peel stre..
Cure Time	45.0 min @Temperature 120 °C	0.750 hour @Temperature 248 °F
Tra-Con Tra-Bond 293-1 General Purpose Instrument Epoxy Adhesive TRA-BOND 293-1 general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper, and brass. The 293-se..
Cure Time	45.0 min @Temperature 120 °C	0.750 hour @Temperature 248 °F
Tra-Con Tra-Bond 293-1M General Purpose Instrument Epoxy Adhesive TRA-BOND 293-1M general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper and brass. The 293-se..
Cure Time	45.0 min @Temperature 149 °C	0.750 hour @Temperature 300 °F
Master Bond Supreme 10HTN Nickel Filled Electrically Conductive One Part Epoxy Master Bond Polymer System Supreme 10HTN combines high shear and high peel strengths, relatively low resistance, and exceptionally easy processing. This one component (no mix) high purity nickel con..
Cure Time	45.0 min @Temperature 120 °C	0.750 hour @Temperature 248 °F
Tra-Con Tra-Bond 293-21 General Purpose Epoxy Adhesive TRA-BOND 293-21 general purpose epoxy adhesive is designed to provide strong, resilient bonds to a variety of difficult-to-bond substrates, such as gold, nickel, silver, copper, and brass. The 293 s..
Cure Time	45.0 min @Temperature 140 °C	0.750 hour @Temperature 284 °F
Trelleborg Emerson & Cuming Eccobond® G757 One-Component High Strength-Impact Resistant Epoxy Adhesive Emerson & Cuming G757 Eccobond® One-Component High Strength-Impact Resistant Epoxy AdhesiveVery flexible, thixotropic, epoxy adhesive. Excellent low temperature resistance. Excellent adhesion to gl..
Cure Time	45.0 min @Temperature 25.0 °C	0.750 hour @Temperature 77.0 °F	Full Load
Chesterton ARC 5 Paste grade Rapid Cure Abrasion Control Description: ARC 5 is an advanced composite formulated for emergency repair and patching of metal components subject to light abrasive and corrosive conditions. It can be used to seal leaks and patc..
Cure Time	45.0 min @Temperature 80.0 °C	0.750 hour @Temperature 176 °F	Minimum Bond Line
Epoxy Technology EPO-TEK® H20-FC Electrically Conductive Epoxy Product Description: EPO-TEK®H20E-FC is a two-component, electrically conductive, snap curing epoxy for photovoltaic thin film module stringing, semiconductor packaging and PCB circuit assembly.Adv..
Cure Time	45.0 min @Temperature 80.0 °C	0.750 hour @Temperature 176 °F	minimum
Epoxy Technology EPO-TEK® H55 Epoxy Material Description: A two component, thixotropic and high temperature epoxy designed to be used for hybrids and PCB applications.Information Provided by Epoxy Technology
Cure Time	45.0 min @Temperature 32.0 °C	0.750 hour @Temperature 89.6 °F	Full Load
Chesterton ARC MX5 Rapid Curing Fine Particle Wear Compound Description: An advanced ceramic reinforced composite for the emergency repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a th..
Cure Time	45.0 min @Temperature 25.0 °C	0.750 hour @Temperature 77.0 °F	Full Load
Chesterton MRS 5 Metal Rebuilding System MRS 5 is an advanced composite formulated for emergency repair and patching of metal components subject to light abrasive and corrosive conditions. It can be used to seal leaks and patch holes as we..
Cure Time	45.0 min @Temperature 249 °C	0.750 hour @Temperature 480 °F	>1 Hour Air Set Required Prior to Curing
Aremco Corr-Paint™ CP4000 High Temperature Protective Silicone Coating, Metal Oxide Filled This silicone-based, heat resistant coatings are formulated using a state-of-the-art, VOC-compliant, water-dispersible silicone resin. CP4000 adheres to metals, ceramics, refractories, and quartz, a..
Cure Time	45.0 min @Temperature 50.0 °C	0.750 hour @Temperature 122 °F
Atom Adhesives AA-DUCT 903 Epoxy Adhesive AA-DUCT 903 is an epoxy adhesive and coating formulation based on Nickel. This epoxy nickel formulation offers the maximum continuity of conductivity with an electrical resistivity value of less tha..
Cure Time	45.0 min @Temperature 75.0 °C	0.750 hour @Temperature 167 °F	Dry to handle, at 50% humidity and 75°C
Blue River Coatings High Performance Acrylic Sanding Sealer BLUE RIVER COATINGS HIGH PERFORMANCE ACRYLIC SANDING SEALER is a waterbased wood sealer to fill the grain. The product is designed to be a sandable self-sealing topcoat for wood. HIGH PERFORMANCE AC..
Cure Time	45.0 min @Temperature 75.0 °C	0.750 hour @Temperature 167 °F	Dry to handle, at 50% humidity and 75°C
Blue River Coatings Hyfro-Flex II PIR (Heat Reflective) Polyurethane Top Coat BLUE RIVER COATINGS HYDRO-FLEX II PIR POLYURETHANE TOPCOAT is a high performance, heat reflective, single component water dispersible polyurethane. HYDRO-FLEX II PIR is formulated with heat reflecti..
Cure Time	45.0 min @Temperature 75.0 °C	0.750 hour @Temperature 167 °F	Dry to handle, at 50% humidity and 75°C
Blue River Coatings Hyfro-Flex Polyurethane Top Coat BLUE RIVER COATINGS HYDRO-FLEX POLYURETHANE TOPCOAT is a water dispersible polyurethane. When the customer receives HYDRO-FLEX, it is already formed in the container, where as the solvent base type,..
Cure Time	45.0 min @Temperature 149 °C	0.750 hour @Temperature 300 °F	alternate cure
Aremco Aremco-Bond™ 2330 High Performance Epoxide Single-Part, Heat Curable, Silicone Elastomer Adhesive
Cure Time	45.0 min @Temperature 23.0 °C	0.750 hour @Temperature 73.4 °F	M10 steel, handling strength
Permabond A131 Anaerobic Threadsealant Permabond® A131 is an anaerobic adhesive designed to seal threaded metal pipe connections carrying a wide variety of gases and liquids, including potable water. Suitable for use on both parallel an..
Cure Time	45.0 - 60.0 min @Temperature 149 °C	0.750 - 1.00 hour @Temperature 300 °F
Master Bond Supreme 10HTFL One Part Epoxy Cures at 250°F Description: Master Bond Polymer System Supreme 10HTFL features a blend of physical properties including outstanding peel strength, very high shear strength and a wide service temperature range of 4..