Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton ARC 10 Paste grade machinable composite Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance and corrosion resistance. It is non-sag.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Overend Coat |
Chesterton ARC 855 Abrasion Control Liquid Description: An advanced ceramic composite formulated to protect equipment from aggressive chemical attack, corrosion, and erosion. The product is a low viscosity composite that is easily applied by.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton ARC 858 Abrasion resistant rebuilding and faring composite An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 0.15 mm (60 mils) or m.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”).. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC 982 100% Novolac acid resistant coating Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. A low viscosity composite that is applied by brush, squeegee, or a plural compo.. |
|||
Cure Time | 1200 min @Temperature 16.0 °C |
20.0 hour @Temperature 60.8 °F |
Light Load/Overcoat End |
Chesterton ARC 982 100% Novolac acid resistant coating Description: An advanced polymer composite formulated to protect equipment from extreme chemical attack and corrosion. A low viscosity composite that is applied by brush, squeegee, or a plural compo.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC BX1 Sliding Wear Compound Description: An advanced contractor grade ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC BX2 Contractor Grade Fine Sliding Wear Compound Description: ARC BX2 is an advanced contractor grade ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It .. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC CS4 low-viscosity, 100% solids, barrier coating Description: An advanced composite formulated to protect concrete surfaces from harsh chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat in a 2 coat syst.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC I BX1 Impact & Wear Resistant Epoxy Composite Description: An advanced grade epoxy and urethane composite for the repair and protection of all metal surfaces subjected to severe abrasion and impact. It is normally applied at a thickness of 6 mm.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton ARC MX1 Vertical Build Extreme Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack. It is applied at a thickness of 6 mm (1/4”).. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Overcoat End |
Chesterton ARC S2 Ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% soli.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Overcoat End |
Chesterton ARC SD4i High temperature ceramic reinforced erosion resistant coating Description: An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10-15 mils) per coat.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Overcoat End |
Chesterton MRS S2 Metal Rebuilding System An advanced ceramic composite for the resurfacing and protection of all metal surfaces. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrinking, 100% solids. MRS S2 is.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Overcoat End |
Chesterton MRS SD4i Metal Rebuilding System An advanced ceramic composite for resurfacing and protection of metal surfaces in immersion service. It is normally applied in a thickness range of 250-370 microns (10 – 15 mils) per coat. Non-shri.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC MX2 High Wear Fine Particle Wear Compound Description: An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion and chemical attack. It is applied at a thickness of 3 mm (1/8”.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton ARC MXC Castable Extreme Wear Compound Description: An advanced ceramic composite, with flowable viscosity, for the repair and protection of all metal surfaces subjected to severe erosion, abrasion and chemical attack. It can be hand tro.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
|
ACC QGel 300 QSI Quantum Silicones High Strength Gel QGel 300 is a clear, very soft, tough, moderately cross-linked, silicone polymer. Silicone gels are used to provide protection from vibration, thermal or mechanical shock. Silicone gels also provide.. |
|||
Cure Time | 1200 min @Temperature -4.00 °C |
20.0 hour @Temperature 24.8 °F |
|
3M Scotchcast™ 2104 Electrical Insulating Resin Scotchcast 2104 Electrical Insulating Resin is a hard, two-part, polyurethane resin encapsulant designed especially for permanent splice protection. 2104 is formulated for virtually every electrical.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton ARC CS2 Low-viscosity, Composite concrete primer sealer Description: An advanced composite formulated to protect concrete surfaces from mild chemical attack. It is normally applied at a thickness of 250-375 microns (10-15 mils) per coat. Non-shrinking. 1.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton MRS 10 Metal Rebuilding System Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance It is non-sagging, non-shrinking and 10.. |
|||
Cure Time | 1200 min @Temperature 25.0 °C |
20.0 hour @Temperature 77.0 °F |
Full Load |
Chesterton MRS 58 Metal Rebuilding System An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo.. |
|||
Cure Time | 1200 min @Temperature 32.0 °C |
20.0 hour @Temperature 89.6 °F |
Full Load |
Chesterton MRS 58 Metal Rebuilding System An advanced ceramic composite for the repair and protection of all metal surfaces subjected to erosion, corrosion and chemical attack. It is normally applied at a thickness of 1.5 mm (60 mils) or mo.. |