Polymer Property : Processing Temperature = 220 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Processing Properties	Metric	English	Comments
Processing Temperature	<= 220 °C	<= 428 °F
Premix Thermoplastics PRE-ELEC® ESD 5000 Polyolefin Compatible Dissipative Masterbatch, IDP Additive PRE-ELEC® ESD 5000 is a polyolefin compatible dissipative masterbatch developed for PP injection moulded products. The active substance is an IDP (inherently dissipative polymer) and it gives a per..
Processing Temperature	<= 220 °C	<= 428 °F
Premix Thermoplastics PRE-ELEC® ESD 7140 Static Dissipative Thermoplastic Compound PRE-ELEC® ESD 7140 is a static dissipative thermoplastic masterbatch based on ABS. The dissipative property is permanent and built into the polymer chain. PRE-ELEC® ESD 7140 has been developed for..
Processing Temperature	<= 220 °C	<= 428 °F
PolyChem Alloy PolySept 2007A PolySept products typically contain 5 – 20% of an antimicrobial agent that is compounded into a plastic resin. The result is an antimicrobial polymer concentrate in a uniform pelletized form. PolyS..
Processing Temperature	220 - 260 Â°C	428 - 500 Â°F	Injection molding cylinder temperature
LG Chemical IH830C PMMA, General Purpose Grade for Injection Molding Highest of all grades in heat resistanceMechanical strength and surface hardnessParticularly recommended for tail lamp, reflectors, and general lighting fixturesFeatures: Excellent transparency and ..
Processing Temperature	220 - 240 Â°C	428 - 464 Â°F	Metering Temperature, Extrusion
Stellarchem SE/PA745B TPE Compound This grade of Stellarchem TPE is shear dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It's a soft, elastomeric polyolefin based, complete..
Processing Temperature	220 - 230 °C	428 - 446 °F	C2
UBE 5034FDX33 Air Blown Nylon 6/66 Film Specialties: High transparencyLow neck-inNucleated typeApplications: Suitable for T-die,Water and Air blown process Processing: Shrink bags (Water) Pouch ( Air blown) Information provided by UBE.
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Borealis Daplen™ ED117AE Polypropylene TPO Compound Daplen™ ED117AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has excellent balanced mechanical properties and gives a good surfac..
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Borealis Daplen™ EE168AI Polypropylene TPO Compound Daplen™ EE168AI is a 10% mineral filled polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness and is easy to process. ..
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Borealis Daplen™ EF210AE Polypropylene TPO Compound Daplen™ EF210AE is a 20% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has excellent balanced mechanical properties, gives a good surface q..
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Borealis Daplen™ EH104AE Polypropylene TPO Compound Daplen™ EH104AE is a 10% mineral filled elastomer modified polypropylene compound intended for injection molding. This material has an excellent balance between impact strength and stiffness, high..
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Borealis MD441U Polypropylene Compound, Mineral Filled MD441U is a 40% mineral filled polypropylene compound intended for injection molding. This material has excellent balanced mechanical properties and a medium melt flow rate. Applications: air cond..
Processing Temperature	220 - 240 °C	428 - 464 °F
Total HDPE SB 1359 High Density Polyethylene - Injection Stretch Blow Molding HDPE SB 1359 is a high density polyethylene with outstanding compromise between stiffness and Environmental Stress Crack Resistance. It has been specifically designed for the manufacture of packagi..
Processing Temperature	220 - 240 °C	428 - 464 °F
Cossa Polimeri ESTALUX 5513 Methyl Methacrylate Acrylonitrile Butadiene Styrene Plastic blend that combines impact properties of ABS with the excellent transparency of PMMAInformation provided by Cossa Polimeri S.r.l.
Processing Temperature	220 - 290 °C	428 - 554 °F
E-Polymers Tekaloy® G70A4 Impact Resistance at Low Temperature PC/ABS Alloy Impact Resistance at Low TemperatureInformation provided by E-Polymers Co. Ltd.
Processing Temperature	220 °C	428 °F	Recommended Extrusion Temperature
Arkema Group Pebax® 4033 SA 01 MED Polyether Block Amide (PEBA) Polyether block amide PEBAX® 4033 SA 01 MED is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This grade offers the highest quality and it is specially designed to meet t..
Processing Temperature	220 °C	428 °F	Recommended Extrusion Temperature
Arkema Group Pebax® 5533 SA 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 5533 SA 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SA grade is specially designed to food uses.Information provided by Arkema ..
Processing Temperature	220 °C	428 °F	Recommended Extrusion Temperature
Arkema Group Pebax® 5533 SP 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 5533 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.Information provide..
Processing Temperature	220 °C	428 °F	Gate Temperature; Extrusion
Alliance Polymers Zythane™ 7065D Thermoplastic Polyurethane Elastomer Zythane™ 7065D is a polycaprolactone-based TPU specifically formulated for injection molding applications .It exhibits excellent low compression set, abrasion resistance and toughness and has good ..
Processing Temperature	220 - 270 °C	428 - 518 °F	Resin Temperature
Asahi Kasei Xyron® 140V Modified Polyphenylene Ether Flame RetardantInformation provided by Asahi Kasei
Processing Temperature	220 - 270 °C	428 - 518 °F	Resin Temperature
Asahi Kasei Xyron® 240W Modified Polyphenylene Ether Flame RetardantInformation provided by Asahi Kasei
Processing Temperature	220 °C	428 °F	Recommended Extrusion Temperature
Arkema Group Pebax® 4033 SP 01 Polyether Block Amide (PEBA) Polyether block amide PEBAX® 4033 SP 01 is a thermoplastic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.Information provide..
Processing Temperature	<= 220 °C	<= 428 °F
Addcomp ADD-VANCE® SA 420 Slip/anti-block additive Fields of application: Improves slip and anti-block properties of thermoplastics. It can also be used as a release agent for injection molded products.Examples: (L)LDPE, HDPE, PP, PS, HIPS, TPO, ABS..
Processing Temperature	220 - 270 °C	428 - 518 °F	Resin Temperature
Asahi Kasei Xyron® 220V Modified Polyphenylene Ether Flame RetardantInformation provided by Asahi Kasei
Processing Temperature	220 - 260 °C	428 - 500 °F	mass temperature
Borealis MD231U Polypropylene Compound, Mineral Filled MD231U is a 20 % mineral filled polypropylene compound intended for injection molding. This material has excellent balanced mechanical properties and a medium melt flow rate. Applications: Air duc..
Processing Temperature	220 °C	428 °F	Typical extrusion metering zone. Do not exceed 238°C (460°F).
DuPont Appeel® LSR 1181 Modified EVA Lidding Sealing Resin Appeel® 1181 is an extrusion coatable resin designed to be a sealing layer for lidding applications. It provides peelable seals over a broad temperature range to a number of container materials inc..