Thermal Properties | Metric | English | Comments |
---|---|---|---|
Vicat Softening Point | 82.0 °C @Load 5.001 kg |
180 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPH TS15010 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Vicat Softening Point | 82.0 °C @Thickness 4.00 mm |
180 °F @Thickness 0.157 in |
Rate A; 10.0 mm wide molded rod; ISO 306/A50 |
Premix Thermoplastics PRE-ELEC® ESD 1100
(discontinued **) PRE-ELEC ESD 1100 is a static dissipative thermoplastic compound based on PETG. The dissipative property is permanent and built into the polymer chain. PRE-ELEC ESD 1100 has been developed for the e.. |
|||
Vicat Softening Point | 82.0 °C @Load 5.001 kg |
180 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPC 05ENH Polypropylene Copolymer, Flame Retardant, Halogen Free Information provided by Polykemi AB |
|||
Vicat Softening Point | 82.0 °C @Load 5.10 kg |
180 °F @Load 11.2 lb |
120°C/h; ASTM D 1525 |
Styrolution PS 454N HIPS Styrolution PS 454N is an impact resistant polystyrene with a good balance of toughness, high flow, heat resistance and high gloss.Good balance of toughness, high flow, and heat resistanceHigh gloss.. |
|||
Vicat Softening Point | 82.0 °C @Load 5.00 kg |
180 °F @Load 11.0 lb |
120°C/hr; ISO 306 |
Chi Mei Polylac® PA-765A ABS - Flame Retardant F.R. High Flow |
|||
Vicat Softening Point | 82.0 °C @Load 5.00 kg |
180 °F @Load 11.0 lb |
120°C/hr; ISO 306 |
Chi Mei Polylac® PA-765B ABS - Flame Retardant F.R. Medium Impact |
|||
Vicat Softening Point | 82.0 °C @Load 5.001 kg |
180 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPH TS15010 H VTUV1 Polypropylene Homopolymer, Mineral Reinforced Information provided by Polykemi AB |
|||
Vicat Softening Point | 82.0 °C @Load 5.001 kg |
180 °F @Load 11.03 lb |
50°C/h; ISO 306 |
Polykemi AB POLYfill PPHC TS20040 Polypropylene, Mineral Reinforced Information provided by Polykemi AB |