Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 110 °C | 230 °F | Maximum operating temperature continuously for 5000 hours based on a tensile stress of 50% at 23° C. |
Omnia Plastica Arnite Omnialite POM c Acetal Copolymer Polyoxymethylene, commonly called Acetal, is a crystalline polymer obtained from the polymerisation of formaldehyde. Discovered fairly recently (1960), it has enjoyed rapid growth and large acceptan.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Deflection Temp.; ASTM D648 |
NCMT NanoPAC™ S216 High Performance Polypropylene Nanocomposite Characteristics: High stiffness Supplementary of ABS Good impact resistant Less shrinkage Good thermal conductivity Applications: Toys Industry AutomobileInformation provided by Nano Composite Mater.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Precision Polymer Engineering J70M Butyl Rubber Bromobutyl Rubber, 65-75 IRHD. Brominated isobutylene-isoprene copolymer. To meet BS3227 Grade 70 and ASTM D2000 line call-out MBA708, F17.Applications: Bromobutyl is resistant to the same fluids a.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
NextGen Adhesives G907-27 Structural Adhesive Description: NGAC G907-27 is a medium viscosity polyamide adhesive system utilized extensively in industrial and structural applications.Advantages and Applications: The NGAC G907-27 provides excell.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous; FRISETTA Test Method |
Nilit FRIANYL B63 KF30 Nylon 6 for injection molding, 30% short glass fiber reinforced Nylon 6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous (GTP 50% Tensile); IEC 60216 |
PolyOne Bergamid™ A700 G20 UF Polyamide 66 (Nylon 66) Information provided by PolyOne |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Resin Technology Group 1114 Oxy-Bond™ Two-Component Epoxy Adhesive Oxy-Bond and Millenium Adhesive SystemsEngineered for strength, durability, lightness, and formability, our Oxy-Bond and Millenium lines offer adhesives with physical and electrical properties to ma.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Abatron 7810-1A/78013B Filled Potting Compound
(discontinued **) Yellow and colors surface casting tooling compound. Fast and abrasion resistant. 100/9 ratio.Information provided by Abatron. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Resin Technology Group TIGA 291-EX Grey Medium Viscosity Polyamide Epoxy Adhesive Mix ratio 1 to 1 by weight.Tiga 291 EX Grey is a medium viscosity polyamide/ epoxy adhesive recommended for bonding applications where high shock impact resistance and peel resistance are desired. T.. |
|||
Maximum Service Temperature, Air | 110 - 170 °C | 230 - 338 °F | Average value: 159 °C Grade Count:6 |
Overview of materials for PBT + ASA Blend, Glass Fiber Reinforced This property data is a summary of similar materials in the MatWeb database for the category "PBT + ASA Blend, Glass Fiber Reinforced". Each property range of values reported is minimum and maximum .. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Lehmann & Voss LUVOCOM® 1700-8541 PPO, unreinforced Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Dynamic stressed parts.Isotropic shrinkage characteristics.Superheated steam sterilizable.Infor.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Lehmann & Voss LUVOCOM® 1-7985 Polyamide 66, with aramid reinforcement and PTFE, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Emergency running property.Improved heat resistance.Control disks, cams, sliding elements and o.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Lehmann & Voss LUVOCOM® 3-7088/GY7012 Polyamide 6, with carbon fiber and glass fiber, low-warpage Applications: Automotive industry, textile machinery, apparatus- and precision engineering.Strong, stiff parts.dynamic stressElectrically conductive, suitable for continuous discharging of staticall.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Lehmann & Voss LUVOCOM® 1/GF/30/TF/15/SI/2-2 Polyamide 66, with glass fiber, PTFE, lubricant modified, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Improved friction and wear behaviour. Emergency running property.High dimensionally stable prec.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Lehmann & Voss LUVOCOM® 1-7984 Polyamide 66, with aramid reinforcement and PTFE, heat stabilized Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Emergency running property.Improved heat resistance.Control disks, cams, sliding elements and o.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | short term |
Lehmann & Voss LUVOCOM® GS-H/2 Polyamide 66, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Emergency running property.Isotropic shrinkage characteristics.Control disks, cams, sliding ele.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
Polyram PlusTek PB300G6 Nylon 6, 30% Glass Fiber 30% Glass-fiber reinforced, heat stabilized polyamide 6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
Polyram RamOfin PPH302G6 Polypropylene, 30% Glass Fiber 30% glass fiber reinforced polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | long time operation |
Zell-Metall Engineering Plastics Zellamid 1200 G Zellamid® 1200 G is manufactured by an activated anionic reaction. Finished and semi-finished parts are produced by a static cast process. This process makes it possible to produce a material wit.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Tra-Con Tra-Bond 2147 Thixotropic Epoxy/Polyamide Adhesive TRA-BOND 2147 is a thixotropic (thick paste) polymer epoxy/polyamide system developed for industrial adhesive and sealing applications where the combination of high fill, easy handling, good wetting.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
Polyram PlusTek PA840G6 Nylon 6.6, 30% Glass Fiber 30% glass fiber reinforced, impact modified polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
Polyram PlusTek RA303G6 Nylon 6.6, 30% Glass Fiber 30% glass fiber reinforced, heat stabilized, and hydrolysis resistant polyamide 6.6 for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
Polyram RamOfin PPH300G4 Polypropylene, 20% Glass Fiber 20% glass fiber reinforced polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous Use |
Polyram RamOfin PPH300G8 Polypropylene, 40% Glass Fiber 40% glass fiber reinforced polypropylene for injection molding applicationsInformation provided by Polyram Ram On Ind. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | Continuous use |
Polyram RamOfin PPH301G6NT Polypropylene, 30% Glass Fiber 30% Glass fiber reinforced polypropylene for injection molding applications. Approved and listed by WRAS Potable Water.Information provided by Polyram. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Trelleborg B739 Nitrile Rubber Nitrile rubber or acrylonitrile-butadiene rubber is a copolymer of butadiene and acrylonitrile.PropertiesGood general resistance to oils.Good mechanical properties especially tensile strength, flexi.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | for 50% loss of tensile strength after 20000hr |
BASF Ultramid® KR 4350 BK 00464 PA6/6T (Dry) Description: For injection-molding and extrusion, exhibiting high toughness, strength and stiffness, low water absorption, high melting point (295 °C [563°F]). The mechanical properties remain con.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | for 50% loss of tensile strength after 20000hr |
BASF Ultramid® KR 4350 PA6/6T (Conditioned) Description: For injection-molding and extrusion, exhibiting high toughness, strength and stiffness, low water absorption, high melting point (295 °C [563°F]). The mechanical properties remain con.. |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
ATG s.r.l. AU-EU Polyurethane Rubber |
|||
Maximum Service Temperature, Air | 110 °C | 230 °F | |
Atom Adhesives AA-DUCT 2919 Epoxy Adhesive AA-DUCT 2919 is a non-bleeding, electrically conductive, silver-filled epoxy formulation recommended for electronic bonding, coating, and sealing applications that require good flexibility coupled w.. |