Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 927 °C | 1700 °F | Continuous |
Pyrotek I-14 Insulating Board Pyrotek's I-14 is a low density hydrous calcium silicate board which features exceptional strength and low thermal conductivity. Inorganic and incombustible, I-14 also contains no RDF's.A.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park 10699 Class IV Salt Neutral Salt Basically the same as Uni-Hard, except that it is formulated per MIL-S-10699-B, Class 4Information provided by Heatbath Corporation - Park Metallurgical. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park No-Carb Stop-Off/Protective Coating for Steel Water-base paint containing copper used to prevent carburization or decarburization of steel during heating for hardening, carburizing, annealing, normalizing, forging or rollingInformation provided.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park Uni-Hard IR High Speed Hardening Salt Frequently used as a preheat for tool hardening or as a heating medium for continuous production hardening. Dragout is minimal because of high fluidity. Uni-Hard IR is water-soluble and non-hygros.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park Uni-Hard IR Neutral Salt Frequently used as a preheat for tool hardening or as a heating medium for continuous production hardening. Dragout is minimal because of high fluidity. Uni-Hard IR is water-soluble and non-hygros.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park Uni-Hard IR Quenching and Tempering Salt Frequently used as a preheat for tool hardening or as a heating medium for continuous production hardening. Dragout is minimal because of high fluidity. Uni-Hard IR is water-soluble and non-hygros.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park Wire Annealing Quenching and Tempering Salt Chloride and carbonate mixture recommended. For annealing nonferrous materials or for heat treating steel where slight decarburization is not desirable. Wire Annealing Salt is extremely fluid, compl.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park No-Carb Special Stop-Off/Protective Coating for Steel Similar to No-Carb, but with a thicker, heavy duty formulation for special applications.Information provided by Heatbath Corporation - Park Metallurgical. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park Uni-Hard IR Steel Brazing Neutral Salt Used for brazing similarly to Nu-Sal. It is more stable than Nu-Sal in the higher temperature range.Information provided by Heatbath Corporation - Park Metallurgical. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Upper limit of working range |
Heatbath/Park Wire Annealing Salt Neutral Salt Chloride and carbonate mixture recommended. For annealing nonferrous materials or for heat treating steel where slight decarburization is not desirable. Wire Annealing Salt is extremely fluid, compl.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | oxidation resistance is good |
ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 303, Annealed (UNS S30300) Allegheny Ludlum's 303 is a free-machining stainless steel specifically designed to exhibit improved machinability. These modifications retain, in so far as possible, the good mechanical properties.. |
|||
Maximum Service Temperature, Air | 927 °C | 1700 °F | Recommended Operating Temperature |
Unifrax Fiberfrax® Fiberwall® 310 SS Systems Hardware The Fiberwall® systems family of anchoring hardware and accessory components provides an array of attachment options to cover a broad range of lining system designs and application requirements. I.. |