Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 7.70 µm/m-°C | 4.28 µin/in-°F | |
Poco Graphite AXF-5Q10W Biomedical Grade Graphite POCO has developed post synthesis modifications to make our graphites more suitable to specific conditions. As a producer of highly technical, specialty materials, POCO also offers design engineerin.. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 20.0 °C |
4.28 µin/in-°F @Temperature 68.0 °F |
|
MarkeTech Aluminum Oxide Ceramic - Alumina 98% Data provided by the supplier, MarkeTech International.Because of their high temperature, chemical, electrical, and mechanical properties along with their relatively low cost and ease of manufacture.. |
|||
CTE, linear | <= 7.70 µm/m-°C @Temperature 20.0 °C |
<= 4.28 µin/in-°F @Temperature 68.0 °F |
|
MarkeTech AO 95 Aluminum Oxide Ceramic Substrate, 95% Purity Data provided by the supplier, MarkeTech International.Substrate Specs: Maximum dimensions 4.0 x 6.0 in.. Thickness 0.12-0.60 in. Surface roughness 0.3 µm as fired; 0.075 µm lapped; 0.025 Â.. |
|||
CTE, linear | <= 7.70 µm/m-°C @Temperature 20.0 °C |
<= 4.28 µin/in-°F @Temperature 68.0 °F |
|
MarkeTech AO 98 Aluminum Oxide Ceramic Substrate, 98% Purity Data provided by the supplier, MarkeTech International.Substrate Specs: Maximum dimensions 4.0 x 6.0 in.. Thickness 0.12-0.60 in. Surface roughness 0.3 µm as fired; 0.075 µm lapped; 0.025 Â.. |
|||
CTE, linear | 7.70 - 8.10 µm/m-°C @Temperature 20.0 - 100 °C |
4.28 - 4.50 µin/in-°F @Temperature 68.0 - 212 °F |
|
MarkeTech Cu/Mo/Cu 1:3:1 Laminated Sheet Cu/MoCu sheets have very high in-plane thermal conductivity provide by layers of Cu and low CTEs provided by the inner layer of molybdenum. These laminated sheets spread heat from a concentrated hea.. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 20.0 °C |
4.28 µin/in-°F @Temperature 68.0 °F |
|
GBC Grade 98 Alumina Data provided by the manufacturer, GBC Materials Corporation. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 260 °C |
4.28 µin/in-°F @Temperature 500 °F |
|
Ferro EG 2992 Glaze and Sealant Glass Glass Type: Bi-Zn-B Typical Powder Form: SRRG Typical Application: Ferrites Ferro's electronic and specialty glass group has produced over 3,000 formulations. Many are used as protective and insu.. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 20.0 - 427 °C |
4.28 µin/in-°F @Temperature 68.0 - 801 °F |
|
Special Metals INCOLOY® Alloy 907 A nickel-iron-cobalt alloy with additions of niobium and titanium for precipitation hardening. It has the low coefficient of expansion and high strength of INCOLOY alloy 903 but with improved notch.. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 20.0 - 427 °C |
4.28 µin/in-°F @Temperature 68.0 - 801 °F |
|
Special Metals INCOLOY® Alloy 909 A nickel-iron-cobalt alloy with a silicon addition and containing niobium and titanium for precipitation hardening. It is similar to INCOLOY alloys 903 and 907 in that it has low thermal expansion .. |
|||
CTE, linear | 7.70 µm/m-°C | 4.28 µin/in-°F | |
Accuratus Accuflect™ Light-Reflecting Ceramic Accuflect™ is a specially formulated and processed ceramic developed by Accuratus to satisfy the market demand for diffuse reflectors in high temperature and high energy environments.Key Property: .. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 20.0 °C |
4.28 µin/in-°F @Temperature 68.0 °F |
|
Aremco Ceramacast™ 575 Alumina Fine Grain Potting Compound Hydraulic setting. Fine grain castable for potting and producing small tools. Used in the production of temperature probes, electrical feed-throughs, large heat treating fixtures, induction coils .. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 0.000 - 100 °C |
4.28 µin/in-°F @Temperature 32.0 - 212 °F |
|
TIMET TIMETAL® 6-2-4-2 (Ti-6Al-2Sn-4Zr-2Mo-0.08Si) Titanium Alloy Medium-Strength, Elevated Temperature AlloyIndustry Specifications: USA Aerospace: AMS 4919.Features: TIMETAL 6-2-4-2 has good tensile creep and fatigue properties up to 540°C. It is the most comm.. |
|||
CTE, linear | 7.70 µm/m-°C @Temperature 20.0 - 600 °C |
4.28 µin/in-°F @Temperature 68.0 - 1110 °F |
ASTM-C373 |
CeramTec 433 Alumina, 99.9% 433 (99.9%) is an alumina that exhibits high hardness. Its fine, equiaxial microstructure provides excellent sliding and abrasive wear resistance. This material is ideal for corrosive conditions. A .. |