Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Covestro Petlon® 4630 Semi-Crystalline PET, 30% Glass Fiber
(discontinued **) Characteristics: Flame Retardant: Electrical Properties, High Heat and Chemical ResistanceApplications: Connectors, Relays, Switches, Automotive (Under Hood), AppliancesProcessing: Injection Molding.. |
|||
CTE, linear | 21.0 - 54.0 µm/m-°C | 11.7 - 30.0 µin/in-°F | Average value: 36.5 µm/m-°C Grade Count:18 |
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), 20% Glass Fiber Filled". Specific grades with glass content betwe.. |
|||
CTE, linear | 21.0 - 450 µm/m-°C | 11.7 - 250 µin/in-°F | Average value: 57.6 µm/m-°C Grade Count:24 |
Overview of materials for Polycarbonate/Polybutylene Terephthalate (PBT) Blend, Glass Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate/Polybutylene Terephthalate (PBT) Blend, Glass Filled". Each property range of values repor.. |
|||
CTE, linear | 21.0 - 30.0 µm/m-°C | 11.7 - 16.7 µin/in-°F | Average value: 22.7 µm/m-°C Grade Count:7 |
Overview of materials for Epoxy, Molded, Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Epoxy, Molded, Mineral Filled". Each property range of values reported is minimum and maximum values of .. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
|
Cookson Group Plaskon® 3300SGH Mineral Filled Epoxy Molding Compound
(discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.Exhibits exceptional reliability, excellent moldability, good release characteristics, low flash and rapid cure. This compound i.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
|
Cookson Group Plaskon® 3300SH Mineral Filled Epoxy Molding Compound
(discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.Exhibits exceptional reliability, excellent moldability, good release characteristics and low flash. This compound is especially.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
|
Cookson Group Plaskon® PPF-165A Molding Compound
(discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.A conventional molding compound specifically formulated for semiconductor devices which are molded with preplated leadframes. Lo.. |
|||
CTE, linear | 21.0 µm/m-°C @Thickness 1.57 mm, Temperature 20.0 °C |
11.7 µin/in-°F @Thickness 0.0620 in, Temperature 68.0 °F |
x-axis; IPC-TM 650-2.4.24 |
Industrial Laminates/Norplex NP193P Synthetic Fabric Description: 17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temp.. |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | Alpha 1; TMA |
Lord Adhesives Thermosetâ„¢ ME-455-1 Epoxy Board Level Encapsulant LORD Thermosetâ„¢ ME-455-1 encapsulant is a low viscosity, one-component, semiconductor grade epoxy designed for the encapsulation of wire-bonded or flip chip die in PPGA, BGA, MCM and other cavi.. |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | Alpha 1 |
Lord Adhesives Thermosetâ„¢ ME-531 Underfill Encapsulant LORD Thermosetâ„¢ ME-531 encapsulant is a high purity, semiconductor grade epoxy underfill product developed for the encapsulation of flip chip devices. It is formulated to reduce warpage and wit.. |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | DIN 53752 |
Lehmann & Voss LUVOCOM® 1105-0706 PEEK, with glass fiber Applications: Automotive industry, textile machinery, medical- and precision engineering, aircraft industry.Strong, stiff parts; impact resistance.Dynamic stressed parts at high movement velocity.Ch.. |
|||
CTE, linear | 21.0 - 42.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
11.7 - 23.3 µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
SABIC Innovative Plastics NORYL HFG300 PPE+PS (Asia Pacific) PPE+PS GF30% filled, FR V-0 |
|||
CTE, linear | 21.0 - 33.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
11.7 - 18.3 µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
SABIC Innovative Plastics NORYL HM4025H PPE+PS (Asia Pacific) 40% GF/MF filled FR PPE/PS blend, high flow |
|||
CTE, linear | 21.0 - 43.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
11.7 - 23.9 µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
SABIC Innovative Plastics NORYL NC220 PPE+HIPS (Asia Pacific) |
|||
CTE, linear | 21.0 - 33.0 µm/m-°C @Temperature -30.0 - 30.0 °C |
11.7 - 18.3 µin/in-°F @Temperature -22.0 - 86.0 °F |
TMA |
SABIC Innovative Plastics NORYL CN5258 PPE+PS (Asia Pacific) 40% filled FR high modulus PPE/PS blend |
|||
CTE, linear | 21.0 - 24.0 µm/m-°C | 11.7 - 13.3 µin/in-°F | |
Master Bond EP21SC-1 Two Component Epoxy Resin System Product Description: Master Bond Polymer System EP21SC-1 is a two component epoxy system featuring abrasion resistance. This high performance compound utilizes silicon carbide as a filler material a.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Plastics Group Polifil® GFABS-20 20% Glass-Reinforced Acrylonitrile-Butadiene Styrene (ABS) Polifil® GFABS series compounds combine the most desirable properties of both components - allowing for enhanced processability and toughness together with the stiffness of glass.Applications: Fire.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 40.0 - 130 °C |
11.7 µin/in-°F @Temperature 104 - 266 °F |
TMA; ASTM E831 |
Plenco 6343 Phenolic, Granular, Transfer Molded PLENCO 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recogniz.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
|
Williams Advanced Alloys WS243 Solder All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | Below Tg |
Epoxy Technology EPO-TEK® H20E-PFC Electrically Conductive, Silver Epoxy Product Description: EPO-TEK® H20E-PFC is a two component, semiconductor grade epoxy, designed for flip chip interconnects using a solder-free joining method.Advantages & Application Notes: Stencil.. |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | Below Tg |
Epoxy Technology EPO-TEK® OE138 Two Component Epoxy Material Description: A two component epoxy with intermediate viscosity range between EPO-TEK® 353ND and EPO-TEK® 353ND-T. It is designed for semiconductor glob top applications, as well as use in.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
|
AIM 96.5Sn/3.5Ag Solder for Photonic Packaging Uses include:Fiber to Ferrule SolderingLaser Die AttachHermetic Packaging & SealingWetting & Sealing Laser OpticsThermal ManagementInformation provided by AIM Specialty Materials. |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | Below glass transition temp; ASTM D696 |
Performance Polymers IPS II PPL-C1050 PEKK (Polyetherketoneketone) Linear Extrusion Grade Amber pellets; neat resinInformation provided by Infinite Polymer System II. |
|||
CTE, linear | 21.0 µm/m-°C | 11.7 µin/in-°F | Below glass transition temp; ASTM D696 |
Performance Polymers IPS II PPL-C4050 PEKK (Polyetherketoneketone) Linear Molding Grade Amber pellets; neat resinInformation provided by Infinite Polymer System II. |
|||
CTE, linear | 21.0 - 77.0 µm/m-°C | 11.7 - 42.8 µin/in-°F | Average value: 39.7 µm/m-°C Grade Count:3 |
Overview of materials for PEKK, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "PEKK, Unreinforced". Each property range of values reported is minimum and maximum values of appropriate.. |
|||
CTE, linear | 21.0 µm/m-°C @Temperature 20.0 °C |
11.7 µin/in-°F @Temperature 68.0 °F |
|
Cookson Group Plaskon® 3300S Mineral Filled Novolac Epoxy Molding Compound
(discontinued **) Test specimens were transfer molded and post cured 4 hours at 175°C.A low stress, flame retardant, novolac hardened epoxy molding compound designed to provide hermeticity protection exceeding that .. |