Thermal Properties | Metric | English | Comments |
---|---|---|---|
Flash Point | >= 150 °C | >= 302 °F | Ignition |
M Chemical GUARD DOGâ„¢ UV123 HALS Light Stabilizer GUARD DOGâ„¢ UV123 hindered amine light stabilizer is highly effective in protecting polymers against degradation caused by exposure to UV radiation.Applications: GUARD DOGâ„¢ UV123 is mainly.. |
|||
Flash Point | >= 150 °C | >= 302 °F | Ignition |
M Chemical GUARD DOGâ„¢ UV292 HALS Light Stabilizer GUARD DOGâ„¢ UV292 is a highly effective hindered amine light stabilizer that protects polymers against degradation caused by exposure to UV radiation.Applications: This UV stabilizer is mainly .. |
|||
Flash Point | >= 150 °C | >= 302 °F | Ignition |
M Chemical GUARD DOGâ„¢ UV770 HALS Light Stabilizer GUARD DOGâ„¢ UV770 unhindered amine light stabilizer is a highly effective radical scavenger that protects polymers against degradation caused by exposure to UV radiation.Applications: Extremely.. |
|||
Flash Point | 150 °C | 302 °F | ASTM D92 |
ExxonMobil 275 NC Mobiltac Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a.. |
|||
Flash Point | 150 °C | 302 °F | |
ChevronTexaco Inhibited Transformer Oil Texaco Transformer Oil and Texaco Transformer Oil Inhibited deliver value through:Prolonged transformer life — Excellent conductive heat transfer properties improve cooling of transformer component.. |
|||
Flash Point | 150 °C | 302 °F | ASTM D92 |
ChevronTexaco Mechanism LPS® ISO 15 Hydraulic Oil Chevron Mechanism LPS Hydraulic Oils are highly refined, paraffinic oils containing oxidation and rust inhibitors, and special antiwear additives to extend the life of hydraulic pumps and motor part.. |
|||
Flash Point | 150 °C | 302 °F | |
ChevronTexaco Rando® HDZ 15 Texaco Rando HDZ oils deliver value through:High oxidation stability — Longer service life than attainable with conventional lubricants used in high pressure service.Protection against rust and cor.. |
|||
Flash Point | 150 °C | 302 °F | |
ChevronTexaco Transultex® CF A Texaco Transultex CF metalworking fluids deliver value through:Excellent antiweld properties from active sulfur and chlorine-free EP compounding which reduce frictional heat, prevent welding of meta.. |
|||
Flash Point | >= 150 °C | >= 302 °F | COC; ASTM D92 |
ExxonMobil SpectraSyn™ 2C Polyalphaolefin (PAO) Fluid Product Description: SpectraSyn™ Low Viscosity Polyalphaolefin (PAO) basestocks feature low temperature properties, low volatility, and improved thermal stability. SpectraSyn™ Low Viscosity (PAO) .. |
|||
Flash Point | 150 °C | 302 °F | ASTM D92 |
ExxonMobil 275 NC Mobiltac Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a.. |
|||
Flash Point | >= 150 °C | >= 302 °F | |
Dow BETAMATE™ 1496 V Epoxy BETAMATE™ 1496 V is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excelle.. |
|||
Flash Point | 150 °C | 302 °F | |
Duratherm 450 Paraffinic Heat Transfer Fluid Duratherm 450 - thermal fluid specifically engineered for applications requiring process heating and cooling efficiently between 30°F and 450°F. Economical and thermally stable, Duratherm 450 offe.. |
|||
Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
Aptek 2100-A/B Urethane Encapsulant and/or Potting Compound General purpose encapsulant and potting compound. Outstanding hydrolytic stability. Excellent adhesion to components/circuit boards. Low modulus, low stress. Field proven for military and space appl.. |
|||
Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
Aptek 2100-A7C/B Low modulus urethane staking compound APTEK 2100-A7C/B is a thixotropic, two component, electrically insulating, low modulus urethane system designed for the staking of electrical/electronic components to printed circuit boards. Althoug.. |
|||
Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
Aptek 2120 PMF Low modulus urethane staking compound Premixed-frozen, low modulus urethane staking compoundAPTEK 2120-PMF is a one component, premixed-frozen, thixotropic, electrically insulating soft urethane adhesive. It was designed for the stakin.. |
|||
Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
Aptek 2205 A/B Low modulus urethane stacking compound APTEK 2205-A/B is a thixotropic, two component, electrically insulating, low modulus urethane system designed for the staking of electrical/electronic components to printed circuit boards. Although.. |
|||
Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
Aptek 2209-A/B Clear, non-yellowing urethane adhesive APTEK 2209-A/B is a water clear, thixotropic, two component, electrically insulating, urethane adhesive designed for bonding various substrates. APTEK 2209-A/B is effective for bonding plastics and.. |
|||
Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
Aptek 2210A/B Electrically conductive urethane adhesive Electrically conductive urethane adhesive, silver-filled, flexible low modulus, low outgassingAPTEK 2210-A/B is a two component, silver-filled, urethane adhesive designed for application where flexi.. |
|||
Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
Aptek 2210A/B Electrically conductive urethane adhesive Electrically conductive urethane adhesive, silver-filled, flexible low modulus, low outgassingAPTEK 2210-A/B is a two component, silver-filled, urethane adhesive designed for application where flexi.. |
|||
Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
Aptek 2503R-A/B Premeasured conformal urethane coating repair kit APTEK 2503-A/B is an unfilled, two component, electrically insulating, transparent, flexible urethane coating system designed for the encapsulation and protection of electrical/electronic components.. |
|||
Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
Aptek 2712-A/B Very low stress silicone adhesive Very low stress silicone adhesive; -110ºC to 260ºC operating range; Low outgassing/space gradeAPTEK 2712-A/B is a two component, white, very soft, thixotropic, electrically insulative, silicone ad.. |
|||
Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
Aptek 2712-A/B Very low stress silicone adhesive Very low stress silicone adhesive; -110ºC to 260ºC operating range; Low outgassing/space gradeAPTEK 2712-A/B is a two component, white, very soft, thixotropic, electrically insulative, silicone ad.. |
|||
Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
Aptek 6100-1A/B Epoxy Encapsulant Optoelectronic grade, water clear encapsulant for IR and visible LED discreet devices. Lower Tg versions available for display devices.Part A is dark blue. Part B is clear to pale yellow.Information.. |
|||
Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
Aptek 6500-PMF Electrically conductive epoxy adhesive High purity, low outgassing, electrically conductive adhesiveAPTEK 6500-PMF is a one component, pre-mixed frozen, 100% solid, silver-filled epoxy adhesive specifically designed for microelectronic d.. |
|||
Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
Aptek 6512-PMF Electronic grade, conductive epoxy adhesive APTEK 6512-PMF is a one component, 100% solid, silver-filled, electrically conductive epoxy adhesive specifically designed for the attachment of electronic components to printed circuit boards. APT.. |