Thermal Properties | Metric | English | Comments |
---|---|---|---|
Pour Point | -21.0 °C | -5.80 °F | Base Oil; ASTM D97 |
Nye Lubricants 350-SBG-2 (RL) Synthetic Oil Information provided by Nye Lubricants. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil 220 Mobil DTE FM Series Mobil DTE FM Series oils are high performance lubricants designed to satisfy a wide range of multi-use equipment requirements for the food processing and packaging industry. These lubricants are qua.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil 424 Mobilmet 400 Series Mobilmet 400 Series products are high-performance multi-purpose cutting oils. They are chlorine-free, non-staining and non-corrosive. They are designed for light to moderate duty cutting operation.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Extra Heavy Mobil DTE Oil Double Letter Series The Mobil DTE Oil Double Letter Series of lubricants are high performance heavy duty circulating oils primarily intended for continuous reuse in circulation lubrication systems for gears and bearing.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Pegasus 905 40 Mobil Pegasus 905 is an ultra-high performance gas engine oil engineered to meet the most rigorous demands of todays high output, low-emissions, fuel-efficient, four-cycle engines. These gas engines.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Teresstic GT 32 Teresstic GT is a high-quality turbine oil formulated to provide effective day-in and day-out performance of steam turbine and gas turbine electricity generators and mechanical drive systems. Teress.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil 27 Mobil DTE 20 Series Mobil DTE 20 Series oils are supreme performance anti-wear hydraulic oils designed to satisfy a wide range of hydraulic equipment requirements. They provide long oil/filter life and optimum equipmen.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Vaculine 525 Mobil Vacuoline 500 Series are extra high performance heavy duty circulating oils specifically designed to meet the critical requirements of the Morgan Construction Companys high speed No-Twist® Ro.. |
|||
Pour Point | -21.0 °C | -5.80 °F | |
ChevronTexaco Aries® 220 Texaco Aries lubricants deliver value through:Long equipment life — Extreme pressure performance withstands heavy shock loads typical of rock drill service, protecting the equipment against rapid w.. |
|||
Pour Point | -21.0 °C | -5.80 °F | |
ChevronTexaco Canopus® 100 Texaco Canopus oils deliver value through:High resistance to forming emulsions due to excellent water separating characteristics.Long lubricant life provided by outstanding stability.Good lubricant .. |
|||
Pour Point | -21.0 °C | -5.80 °F | |
ChevronTexaco Canopus® 150 Texaco Canopus oils deliver value through:High resistance to forming emulsions due to excellent water separating characteristics.Long lubricant life provided by outstanding stability.Good lubricant .. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco Elite-Cut® AXH Metal Working Fluid FeaturesChevron -Cut Metalworking Fluids are a complete line of chlorinated cutting oils. The line consists of individual products with antiweld and lubricity properties to cover practically all met.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco Gear Compounds EP, ISO 220 FeaturesChevron Gear Compounds EP are multipurpose gear lubricants.They provide good thermal stability, extreme pressure
protection, antiwear and demulsibility, oxidation, rust, corrosion control an.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco ISO 100 Utility Oil HVI FeaturesChevron Utility Oil HVI is a high quality, high viscosity index uncompounded oil with excellent water separating characteristics.Chevron Utility Oil HVI possesses good natural thermal and ox.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco ISO 150 AIO FeaturesChevron AIO (Chevron Authentic Industrial Oils) provide rust protection, oxidation inhibition, and foam suppression.Chevron AIO are good quality lubricants for any application not requiring .. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco ISO 220 Red Chain Bar Oil FeaturesChevron Red Chain Bar Oils are very tacky, tough, lubricants made from special high viscosity base oils having the desired flow and pumpability properties to assure adequate lubrication over.. |
|||
Pour Point | -21.0 °C | -5.80 °F | |
ChevronTexaco Meropa® 220 Texaco Meropa oils deliver value through:Gear set efficiencies — High thermal stability EP system maintains clean gear and bearing surfaces, minimizing deposits which interfere with effective lubri.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil 26 Mobil DTE 20 Series Mobil DTE 20 Series oils are supreme performance anti-wear hydraulic oils designed to satisfy a wide range of hydraulic equipment requirements. They provide long oil/filter life and optimum equipmen.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil 27 Mobil DTE 20 Series Mobil DTE 20 Series oils are supreme performance anti-wear hydraulic oils designed to satisfy a wide range of hydraulic equipment requirements. They provide long oil/filter life and optimum equipmen.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Extra Heavy Mobil DTE Oil Double Letter Series The Mobil DTE Oil Double Letter Series of lubricants are high performance heavy duty circulating oils primarily intended for continuous reuse in circulation lubrication systems for gears and bearing.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Pegasus 905 40 Mobil Pegasus 905 is an ultra-high performance gas engine oil engineered to meet the most rigorous demands of todays high output, low-emissions, fuel-efficient, four-cycle engines. These gas engines.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Vaculine 525 Mobil Vacuoline 500 Series are extra high performance heavy duty circulating oils specifically designed to meet the critical requirements of the Morgan Construction Companys high speed No-Twist® Ro.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Teresstic 32 TERESSTIC is the brand name for a line of long-service-life lubricating oils that have ranked for over five decades among the finest products of their kind. Continually improved over the years, TERE.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Teresstic GT 32 Teresstic GT is a high-quality turbine oil formulated to provide effective day-in and day-out performance of steam turbine and gas turbine electricity generators and mechanical drive systems. Teress.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco Delo® 1000 Marine Engine Oil, SAE 30 FeaturesChevron Marine Engine Oils Delo 1000 Marine are highquality engine oils developed for use in a wide variety of medium speed trunk piston engines, including the latest design high output engi.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco Delo® 2000 Marine Engine Oil, SAE 30 FeaturesChevron Marine Engine Oil Delo 2000 Marine is a high quality engine oil developed for use in a wide variety of medium speed trunk piston engines burning marine diesel oils, or residual fuels.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ChevronTexaco Sil-X® SF Grease FeaturesChevron Sil-X Grease is a silica thickened grease. It is manufactured using high viscosity, high viscosity index base oils and contain effective rust and oxidation inhibitors.It is transpare.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Almo 532 Mobil Almo 500 Series lubricants are premium quality high performance products primarily intended for the lubrication of pneumatically operated rock drills in underground and surface mining operatio.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Delvac 40 1640 Mobil Delvac 1630, 1640, and 1650 are high performance monograde diesel engine oils formulated from advanced technology base oils and a balanced additive system. They are specifically engineered f.. |
|||
Pour Point | -21.0 °C | -5.80 °F | ASTM D97 |
ExxonMobil Mobil Delvac 40 1640 Mobil Delvac 1630, 1640, and 1650 are high performance monograde diesel engine oils formulated from advanced technology base oils and a balanced additive system. They are specifically engineered f.. |