- HOME
- POLYMER SEARCH
- Polymer Property : CTE, linear = 17.0 µm/m-°C
Polymer Property : CTE, linear = 17.0 µm/m-°C Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 17.0 µm/m-°C @Temperature -55.0 - 288 °C |
9.44 µin/in-°F @Temperature -67.0 - 550 °F |
X-Direction; ASTM D3386-94 |
| Rogers Corporation RO3003 Ceramic-Filled PTFE Composite, High Frequency Circuit Material Features and Benefits: |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature -55.0 - 288 °C |
9.44 µin/in-°F @Temperature -67.0 - 550 °F |
X-Direction; ASTM D3386-94 |
| Rogers Corporation RO3006 Ceramic-Filled PTFE Composite, High Frequency Circuit Material Features and Benefits: |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 30.0 - 150 °C |
9.44 µin/in-°F @Temperature 86.0 - 302 °F |
X-, Y-Direction; IPC 2.4.41.3 |
| Rogers Corporation Ultralam® 3850 Liquid Crystalline Polymer Circuit Material ULTRALAM® 3850 laminate circuit materials utilize highly temperature resistant liquid crystalline polymer (LCP) as the dielectric film.Features & Benefits:Excellent high frequency propertiesStable .. |
|||
| CTE, linear | 17.0 - 18.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 - 10.0 µin/in-°F @Temperature 68.0 - 572 °F |
|
| PEAK Werkstoff DISPAL S263 Aluminum Alloy, AlSi25Cu3Fe3Ni3MgCoTi, Condition T6 Excellent properties:abrasive stabilityhigh stiffness (E-modulus)resistance even at high temperaturesgood grindabilityPEAK DISPAL materials allow the manufacturing of pistons for highest operational.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature -55.0 - 288 °C |
9.44 µin/in-°F @Temperature -67.0 - 550 °F |
X, Y- Direction; IPC-TM-650 2.4.41 |
| Rogers Corporation RO3035 Ceramic-Filled PTFE Composite, High Frequency Circuit Material Features and Benefits:Low dielectric lossExcellent mechanical properties versus temperature - reliable stripline and multi-layer board constructions.Uniform mechanical properties- ideal for multi-la.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature -55.0 - 280 °C |
9.44 µin/in-°F @Temperature -67.0 - 536 °F |
Y Direction; IPC-TM-650 2.4.41 |
| Rogers Corporation RO4450F Prepreg Prepreg is commonly used to inexpensively form less critical signal layers in antenna designs. A high post-cure Tg makes RO4400 series prepreg an excellent choice for multi-layers requiring sequent.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 µin/in-°F @Temperature 68.0 - 572 °F |
|
| Industeel CLC 17.12.2 L 2% Mo Containing 18 Cr –10 Ni Austenitic Stainless Steel Description: CLC 17-12-2L is one of the basic grade of the stainless steels range. 2% Molybdenum bearing ensures better corrosion resistance than CLC 18-9 L grade, particularly regarding to uniform .. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
| Haynes 25 alloy, cold worked sheet, 20% cold reduction, aged at 370°C (700°F) for 1 hour Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal ga.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
| Haynes 556® alloy, 10% cold reduction, 1121°C anneal for 5 minutes Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
| Haynes 556® alloy, 30% cold reduction Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
| Haynes 556® alloy, bar, after 1000 hours at 870°C (1600°F) Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
| Haynes 556® alloy, bar, after 4000 hours at 760°C (1400°F) Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
| Haynes 556® alloy, bar, after 8000 hours at 650°C (1200°F) Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1 H12 1/2 hard, Rolled Copper Alloy Description: The AP1D grade has been developed especially for being machined by lathe. The very good machineability of the AP1D grade may be summerised by: cutting speed up to 150 m/minute (accordin.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP4 H13 3/4 hard, Drawn Copper Alloy Description: The AP4 grade is less easy to turn than the other grades of ARCAP. It can however be machined without more difficulty than the nickel chromium molybdenum steels.High Corrosion Resistanc.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 600 °C |
9.44 µin/in-°F @Temperature 32.0 - 1110 °F |
|
| CLAL-MSX ARCAP Anticorrosion AP1C H11 1/4 hard, Drawn Copper Alloy Description: The AP1C grade (used in rods for parts that are to be deformed by torsion, bending, riveting, swaging... and for welding) and the AP1 grade (sheet, strip, wire, tubes) is machineable un.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 120 °C |
9.44 µin/in-°F @Temperature 32.0 - 248 °F |
longitudinal direction, 100 x 15 x 3 mm sample; AZDEL Test |
| Azdel Plus U421B02N 42% Directionalized Continuous Fiber Mat / PP Resin Matrix AZDEL® U421B02N is a uni-directional fiber and random glass mat reinforced polypropylene composite material featuring excellent fiber distribution over long flow paths and complex part forms. This.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 0.000 - 100 °C |
9.44 µin/in-°F @Temperature 32.0 - 212 °F |
x direction; IPC TM-650 2.4.24 |
| Arlon DiClad 870 PTFE/Woven Fiberglass Laminate Extremely Low Loss TangentExcellent Dimensional StabilityProduct Performance UniformityBenefits:Electrical Properties are highly uniform across frequencyConsistent Mechanical PerformanceExcellent Ch.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
| Haynes 25 alloy, room temperature after 0% cold reduction Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal gall.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 1000 °C |
9.44 µin/in-°F @Temperature 77.0 - 1830 °F |
|
| Haynes 25 alloy, room temperature after 10% cold reduction Excellent high-temperature strength with good resistance to oxidizing environments up to 980°C for prolonged exposures and excellent resistance to sulfidation and excellent resistance to metal gall.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 20.0 - 300 °C |
9.44 µin/in-°F @Temperature 68.0 - 572 °F |
|
| Industeel CLC 18.9 L General Purpose 18Cr-9Ni Austenitic Stainless Steel Description: CLC 18-9L is a 18Cr-9Ni austenitic stainless steel. The grade contains small amount of ferrite (~ 3%) after solution annealing (1000-1100°C – 1832-2012°F) and water quenching. This k.. |
|||
| CTE, linear | 17.0 µm/m-°C @Temperature 25.0 - 900 °C |
9.44 µin/in-°F @Temperature 77.0 - 1650 °F |
|
| Haynes 556® alloy, 40% cold reduction, 1065°C anneal for 5 minutes Effective resistance to sulfidizing, carburizing, and chlorine-bearing environments at high temperature; good oxidation resistance, fabricability, and excellent high-temperature strength; resists co.. |
|||
Copyright © lookpolymers.com All Rights Reserved