Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 120 µm/m-°C @Temperature 23.0 - 100 °C |
66.7 µin/in-°F @Temperature 73.4 - 212 °F |
|
Murtfeldt Murdopol® Nylon 12 Murdopol® has extremely high shock and impact resistance characteristics and good emergency running characteristics thanks to its high wear resistance. The main advantage of this material is its f.. |
|||
CTE, linear | 120 - 145 µm/m-°C @Temperature 25.0 - 100 °C |
66.7 - 80.6 µin/in-°F @Temperature 77.0 - 212 °F |
ASTM D696 |
Polikim EFALON® C-15 PTFE, 15% Glass Filled C15 and C25 have less thermal expansion, higher wear resistance and less deformation under load compared to virgin Efalon® (PTFE). Applications: Seals, Seal rings, gaskets, valve sets, piston rings.. |
|||
CTE, linear | 120 - 140 µm/m-°C @Temperature 25.0 - 300 °C |
66.7 - 77.8 µin/in-°F @Temperature 77.0 - 572 °F |
ASTM D696 |
Polikim EFALON® K-35 PTFE, 35% Carbon Filled K25 and K35 have less thermal expansion, higher wear resistance, less deformation under load properties compared to virgin Efalon® (PTFE). Applications: Bearings, piston rings, gaskets, seal rings... |
|||
CTE, linear | 120 µm/m-°C @Temperature 0.000 - 50.0 °C |
66.7 µin/in-°F @Temperature 32.0 - 122 °F |
ASTM E831 |
Proto3000 Duraform® EX Selective Laser Sintering (SLS®) Prototyping Polymer Plastic for use with all Sinterstation® Pro and Sinterstation HiQ™ series SLS® systemsDescription: This impact-resistant plastic offers the toughness of injection-molded polypropylene and ABS and.. |
|||
CTE, linear | 120 µm/m-°C @Temperature >=143 °C |
66.7 µin/in-°F @Temperature >=289 °F |
Average above Tg; ISO 11359 |
Victrex® PEEK 150GL15 Polyetheretherketone, 15% Glass Fibre Reinforced Product Description:High performance thermoplastic material, 15% glass fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding, very easy flow, FDA food conta.. |
|||
CTE, linear | 120 µm/m-°C @Temperature >=143 °C |
66.7 µin/in-°F @Temperature >=289 °F |
Average above Tg; ISO 11359 |
Victrex® PEEK 450GL20 Polyetheretherketone, 20% Glass Fibre Reinforced Product Description:High performance thermoplastic material, 20% carbon fibre reinforced Polyetheretherketone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, .. |
|||
CTE, linear | 120 µm/m-°C @Temperature 20.0 °C |
66.7 µin/in-°F @Temperature 68.0 °F |
|
Solvay Specialty Polymers Hyflon® PFA 450 Fluoropolymer
(discontinued **) Data provided by the manufacturer.Hyflon® PFA 450 has outstanding physical and chemical properties typical of fluoropolymers.Hyflon® PFA 420 |
|||
CTE, linear | 120 µm/m-°C @Temperature 100 °C |
66.7 µin/in-°F @Temperature 212 °F |
Estimated by MatWeb from similar grades |
EVALCA EVAL® EP-J102B Ethylene Vinyl Alcohol Copolymer Resin
(discontinued **) 32 mol % Ethylene.Data provided by EVALCA. Designed to provide a wide thermoforming range together with high barrier properties. EVAL® EP-J102B is specifically designed for thermoforming applicat.. |
|||
CTE, linear | 120 µm/m-°C @Temperature <=150 °C |
66.7 µin/in-°F @Temperature <=302 °F |
ISO E 831 |
Wolf Kunststoff ZEDEX® ZX-100K A1K Polymer Alloy Main Characteristics: Hard; Stiff; Tough; High fatigue strength; Good weather resistance; Good machinability; FDA compliant LABS; PTFE and silicone-free; KTW approved; Stress resistantApplications: .. |
|||
CTE, linear | 120 µm/m-°C @Temperature <=100 °C |
66.7 µin/in-°F @Temperature <=212 °F |
ISO E 830 |
Wolf Kunststoff ZEDEX® ZX-550 A5L Polymer Alloy Main Characteristics: Strong anti-adhesive; Low creep; Weather resistant; No water absorption; Good machinability; Strongly viscoelastic; Stress resistantApplications: Chemical Engineering; Laborato.. |
|||
CTE, linear | 120 µm/m-°C @Temperature 0.000 - 50.0 °C |
66.7 µin/in-°F @Temperature 32.0 - 122 °F |
ASTM E831 |
3D Systems DuraForm® EX Impact-Resistant Plastic for SLS® Systems This impact-resistant plastic offers the toughness of injection-molded polypropylene and ABS and is suitable for Rapid Manufacturing. For use with all Sinterstation® Pro and Sinterstation HiQ™ ser.. |
|||
CTE, linear | 120 µm/m-°C @Temperature 0.000 - 50.0 °C |
66.7 µin/in-°F @Temperature 32.0 - 122 °F |
ASTM E831 |
ALM PA 850 Black Nylon 11 SLS Prototyping Polymer Information provided by Advanced Laser Materials (ALM). |
|||
CTE, linear | 120 µm/m-°C @Temperature 0.000 - 50.0 °C |
66.7 µin/in-°F @Temperature 32.0 - 122 °F |
ASTM E831 |
ALM PA 860 White Nylon 11 SLS Prototyping Polymer Unfilled White PA 11 that is formulated for easy processing across all LS platforms. Tightly controlled particle distribution creates a smooth surface finish and excellent feature detail. Parts prod.. |
|||
CTE, linear | 120 µm/m-°C @Temperature >=40.0 °C |
66.7 µin/in-°F @Temperature >=104 °F |
above Tg |
Resinlab® SEC1233 Silver Filled Epoxy Adhesive Resinlab™ SEC1233 is a silver filled, two component, room temperature curing epoxy adhesive. It is designed to cure completely at room temperature. SEC1233 provides excellent electrical conductivit.. |
|||
CTE, linear | 120 µm/m-°C @Temperature >=143 °C |
66.7 µin/in-°F @Temperature >=289 °F |
Average above Tg; ASTM D696 |
Victrex® PEEK 650GL30 30% Glass Fiber Filled, PolyEtherEtherKetone High performance thermoplastic material, 30% glass fiber reinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection molding and extrusion, low flow, color natural/beige.Typical.. |