- HOME
- POLYMER SEARCH
- Polymer Property : Melting Point = 118 °C
Polymer Property : Melting Point = 118 °C Product List
Thermal PropertiesTips: 30 items are displayed at most.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 118 °C | 244 °F | Internal method |
|
Polimeri Europa Riblene® FM 50 Low Density Polyethylene - Blown Film Extrusion
Riblene FM 50 is a low density polyethylene (LDPE) suitable for blown film extrusion. Riblene FM 50 is characterized by optimum optical properties and rigidity.Films manufactured with Riblene FM 50..
|
|||
| Melting Point | 118 °C | 244 °F | Internal method |
|
Polimeri Europa Riblene® FM 53 Low Density Polyethylene - Blown Film Extrusion
Riblene FM 53 is a low density polyethylene (LDPE) with added slip and antiblocking agents, suitable for blown film extrusion. Riblene FM 53 is characterized by optimum optical properties and rigid..
|
|||
| Melting Point | 118 °C | 244 °F | Internal method |
|
Polimeri Europa Clearflex® CL B0 Very Low Density Polyethylene
Clearflex CL B0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin has a high stretchability and a good cling effect.Main Applications: C..
|
|||
| Melting Point | 118 °C | 244 °F | Peak Melting Temperature; ExxonMobil Method |
|
ExxonMobil Exceed™ 1318CA Blown Film Resin
(discontinued **)
Exceed 1318CA resin is a hexene copolymer produced using ExxonMobil Chemicals EXXPOL® Technology. Films made from 1318CA resin have outstanding tensile, impact strength and puncture. These superi..
|
|||
| Melting Point | 118 °C | 244 °F | Peak Melting Temperature; ExxonMobil Method |
|
ExxonMobil Exceed™ 1518CA Tough Premium Film Resin
(discontinued **)
Exceed 1518CA resin is a hexene copolymer produced using ExxonMobil Chemicals EXXPOL® Technology. Films made from 1518CA resin have outstanding tensile, impact strength and puncture. These superi..
|
|||
| Melting Point | 118 °C | 244 °F | Peak Melting Temperature; ExxonMobil Method |
|
ExxonMobil Exceed™ 2018CA Blown Film Resin
(discontinued **)
Exceed 2018CA resin is an ethylene based polymer produced with metallocene single site catalysts using ExxonMobil Chemicals EXXPOL® Technology. The higher melt index makes this polymer ideally sui..
|
|||
| Melting Point | 118 °C | 244 °F | Exxon Method |
|
ExxonMobil Exceed™ 350D65 LDPE/Hexene Tough Premium Liner Film Resin, 0.8 mil Film
(discontinued **)
Data provided by the manufacturer, Exxon Chemical.A hexene copolymer produced using Exxon Chemical's EXXPOL® technology. Films made from EXCEED 350D65 resin have outstanding tensile, impact streng..
|
|||
| Melting Point | 118 °C | 244 °F | Exxon Method |
|
ExxonMobil Exceed™ 350D65 LDPE/Hexene Tough Premium Liner Film Resin, 3.1 mil Film
(discontinued **)
Data provided by the manufacturer, Exxon Chemical.A hexene copolymer produced using Exxon Chemical's EXXPOL® technology. Films made from EXCEED 350D65 resin have outstanding tensile, impact streng..
|
|||
| Melting Point | 118 - 131 °C | 244 - 268 °F | |
|
Indium Corp. Indalloy 71 Indium-Tin Solder Alloy
Information Provided by Indium Corporation
|
|||
| Melting Point | 118 - 145 °C | 244 - 293 °F | |
|
Indium Corp. Indalloy 87 Indium-Tin Solder Alloy
Information Provided by Indium Corporation
|
|||
| Melting Point | 118 - 125 °C | 244 - 257 °F | |
|
Indium Corp. Indalloy 1 Indium-Tin Solder Alloy
Fair wettability on glass, quartz, and many ceramics. Good low temperature malleability. Compensates for some CTE mismatch. Low vapor pressureInformation Provided by Indium Corporation
|
|||
| Melting Point | 118 °C | 244 °F | Eutectic |
|
Indium Corp. Indalloy® 1E In-Sn Solder Alloy
Lowest melting point practical solder. Indium-tin eutectic with sharp melting point. Has good wettability on glass, quartz and many ceramics. Has good low temperature malleability and therefore com..
|
|||
| Melting Point | 118 - 128 °C | 244 - 262 °F | MQSA 111 |
|
Lubrizol Advanced Materials PEARLCOAT® DIPP-119 Thermoplastic Polyurethane Elastomer
PEARLCOAT® DIPP-119 is polycaprolactone copolyester based thermoplastic polyurethane, supplied in form of translucent pellets. Featuring low melting point and excellent transparency, this product..
|
|||
| Melting Point | 118 °C | 244 °F | DSC |
|
Silon Tabond 3012 Adhesive Resin
TABOND 3012 is an LLDPE based adhesive resin.Characteristics: • Highest adhesion to aluminium, copper, brass and steel • Adhesion durability at elevated temperatures and pressure cycling p..
|
|||
| Melting Point | 118 °C | 244 °F | DSC |
|
Silon Tabond 3021 Adhesive Resin
TABOND 3021 is LLDPE based adhesive resin for co-extruded three layer barrier and composite pipe applications.Characteristics: • Strong adhesion to aminosilane treated glass, Nylon,
EVOH, PET, ..
|
|||
| Melting Point | 118 °C | 244 °F | ASTM D3418 |
|
SK Chemicals SKYTHANE® SG100 SKYGREEN Biodegradable Thermoplastic
SKYGREEN is a series of aliphatic polyester and aliphatic/aromatic copolyester that is degraded into water and carbon dioxide by microorganismsSKYGREEN, biodegradable thermoplastics, has been develo..
|
|||
| Melting Point | 118 °C | 244 °F | ISO 11357/03 |
|
Borealis Himod™ FT7324 . LDPE for Film
Himod FT7324 is a tubular, low-density polyethylene grade for the production of packaging films. Compared to standard LDPE grades, the Himod products provide a combination of higher stiffness and i..
|
|||
| Melting Point | <= 118 °C | <= 244 °F | |
|
Tisan TISSAN® UNR Styrene Acrylonitrile
Properties:Natural or ColoredGlass fiber and glass beadMineral filledFlame retardantGood thermal and chemical resistanceExcellent transparencyExcellent mechanical propertiesDimensional stabilityEasy..
|
|||
| Melting Point | 118 °C | 244 °F | |
|
Williams Advanced Alloys WS118 Solder
All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys
|
|||
| Melting Point | 118 - 145 °C | 244 - 293 °F | |
|
Williams Advanced Alloys WS145 Solder
All Williams alloys are available in a variety of shapes and forms, including ribbon, preforms, rod, ring, wire, and custom shapes.Information provided by Williams Advanced Alloys
|
|||
| Melting Point | 118 - 123 °C | 244 - 253 °F | DSC |
|
EMS-Griltech Griltex® 9E Copolyester Hotmelt Adhesive (Apparel Interlinings)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
|
|||
| Melting Point | 118 - 123 °C | 244 - 253 °F | DSC |
|
EMS-Griltech Griltex® 9E Copolyester Hotmelt Adhesive (Technical Applications)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
|
|||
| Melting Point | 118 - 123 °C | 244 - 253 °F | DSC |
|
EMS-Griltech Griltex® D 1539E Copolyester Hotmelt Adhesive (Technical Applications)
Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo..
|
|||
| Melting Point | <= 118 °C | <= 244 °F | Peak Melting Point; ExxonMobil method |
|
ExxonMobil Escorene™ UL 05540EH2 Ethylene Vinyl Acetate Copolymer (European Grade)
Product Description: UL 05540EH2 is a copolymer of ethylene and vinyl acetate.Availability: Africa & Middle East, Asia Pacific and Europe Additive: Antiblock: NoSlip: No Thermal Stabilizer: Yes Fre..
|
|||
| Melting Point | 118 °C | 244 °F | Dow Method (DSC) |
|
Dow FLEXOMER™ DFDA-1137 NT 7 Very Low Density Polyethylene (VLDPE) Resin
FLEXOMER™ DFDA-1137 NT 7 is an ethylene copolymer intended for use in molding and extrusion applications where high flexibility is desired. It is especially useful for flexible hose and tube appli..
|
|||
| Melting Point | 118 °C | 244 °F | DSC |
|
Arkema Group OREVAC® 18319 Grafted Maleic Anhydride Polyethylene
OREVAC 18319 is a maleic anhydride grafted polyethylene used in the manufacturing of multi-layer aluminium panels. OREVAC 18319 is mainly used in aluminium panels to have good adhesion performances ..
|
|||
| Melting Point | 118 °C | 244 °F | |
|
AIM 52In/48Sn Solder for Photonic Packaging
Uses include:Fiber to Ferrule SolderingLaser Die AttachHermetic Packaging & SealingWetting & Sealing Laser OpticsThermal ManagementInformation provided by AIM Specialty Materials.
|
|||
| Melting Point | 118 - 218 °C | 244 - 424 °F | Average value: 156 °C Grade Count:23 |
|
Overview of materials for Thermoplastic Polyurethane (TPUR), Polyether Grade
This property data is a summary of similar materials in the MatWeb database for the category "Thermoplastic Polyurethane (TPUR), Polyether Grade". Each property range of values reported is minimum a..
|
|||
| Melting Point | 118 °C | 244 °F | Peak Melting Temperature; ASTM D3418 |
|
ExxonMobil Exceed™ 2018EB Blown Film Resin
(discontinued **)
Exceed 2018EB resin is an ethylene based polymer produced with metallocene single site catalysts using ExxonMobil Chemicals Exxpol® Technology. The higher melt index makes this polymer ideally sui..
|
|||
Copyright © lookpolymers.com All Rights Reserved