Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 304 °C | 580 °F | |
Quadrant EPP Duratron® PI D7015G PI Bearing Grade Polyimide (ASTM Product Data Sheet) |
|||
Melting Point | 304 °C | 580 °F | |
Quadrant EPP Duratron® PI D7000 PI Unfilled Polyimide (ASTM Product Data Sheet) |
|||
Melting Point | 304 °C | 579 °F | |
Johnson Matthey JM A25 Soft Solder/Flux General information on the Johnson Matthey soft solder and flux product line: A wide range of Tin/Lead solders suitable for a variety of applications is available from Johnson Matthey. Most materi.. |
|||
Melting Point | 304 °C | 580 °F | |
Heatbath/Park AL-3 High Speed Hardening Salt A low-cost granular mixture of nitrates formulated for tempering steels where the lower melting point and wider working range of AL-2 are not needed. Like AL-2, AL-3 is a highly fluid bath that offe.. |
|||
Melting Point | 304 - 365 °C | 579 - 689 °F | |
Indium Corp. Indalloy 229 Lead Solder Alloy Information Provided by Indium Corporation |
|||
Melting Point | 304 °C | 579 °F | |
Indium Corp. Indalloy® 237 Pb-Sn-Ag-In Solder Alloy High temp solder.Information provided by the manufacturer, Indium Corporation. |
|||
Melting Point | 304 °C | 579 °F | ISO 11357-1, DSC,10 [K/min] |
Akro-Plastic Akromid® T6 GF 40 (3500) PPA Conditioned, 40% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high.. |
|||
Melting Point | 304 °C | 579 °F | ISO 11357-1, DSC,10 [K/min] |
Akro-Plastic Akromid® T6 GF 50 (3106) PPA Dry, 50% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high.. |
|||
Melting Point | 304 °C | 579 °F | ISO 11357-1, DSC,10 [K/min] |
Akro-Plastic Akromid® T6 GF30 (3501) PPA Dry, 30% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high.. |
|||
Melting Point | 304 °C | 579 °F | ISO 11357-1, DSC,10 [K/min] |
Akro-Plastic Akromid® T6 GF 40 (3500) PPA Dry, 40% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high.. |
|||
Melting Point | 304 °C | 579 °F | ISO 11357-1, DSC,10 [K/min] |
Akro-Plastic Akromid® T6 GF 50 (3106) PPA Conditioned, 50% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high.. |
|||
Melting Point | 304 °C | 579 °F | ISO 11357-1, DSC,10 [K/min] |
Akro-Plastic Akromid® T6 GF30 (3501) PPA Conditioned, 30% Glass Filled The new AKROMID® T is characterized primarily by high heat resistance and the lowest moisture absorption of the three PA grades, making it particularly well-suited in the automotive sector for high.. |
|||
Melting Point | 304 - 370 °C | 579 - 698 °F | |
Johnson Matthey JM A5 Soft Solder/Flux General information on the Johnson Matthey soft solder and flux product line: A wide range of Tin/Lead solders suitable for a variety of applications is available from Johnson Matthey. Most materi.. |